ReadyMadeRC
VAS - 1.3 GHZ CLOVERLEAF ANTENNA (RHCP) SIDE FEED
Gain | 1.25dbic |
Beam | 360 degree doughnut |
Polarization | RHCP |
Rejection | 9db |
Radiation pattern:,
This amazing creation is built by Alex Greve (IBCrazy). The ...ReadyMadeRC
12V STEPUP REGULATOR
Specs:, 5 - 12V input,
12V stepup power supply. Provides a simple way to power ...ReadyMadeRC
POWERBOXAV AUDIO VIDEO AND POWER DISTRIBUTION BOX
Dimensions | 85 x 74 x 23mm |
Weight | 120 g |
Power Requirements | 6-12v, 30W max power output |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
http | //www.readymaderc.com/ |
Ships with:, 1 x 3 meter 3.5mm -> 3.5mm A/V cable (goggles -> powerbox), There are a variety of cables you can use with the Powerbox. For power, it's the standard 2.1mm barrel connectors:, There are 1 foot cables with female RCA connectors:, There are 1.2meter and 3 meter cables with male RCA connectors:, And also 1.2 and 3 meter cables that have the mini connectors on both ends that can connect between the Powerbox and some of the FatShark goggles and the EZTracker as well:,
Ground-station Companion Today’s ground-station is typically an array of devices, ...ReadyMadeRC
EZTRACKER ANTENNA TRACKER
,
The EzAntennaTracker system, is the first commercially available antenna tracker ...ReadyMadeRC
EZOSD WITH DEANS STYLE POWER PLUGS
EzOSD | The FPVers OSD |
After-flight debriefing, shows a summary of the flight | Max. altitude, max. distance, max. speed, average speed, distance flown, etc. |
ReadyMadeRC
DUO5800 V3 A/V DIVERSITY RECEIVER
Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
Weight | 200 grams |
Size | 80 x 100 x 23mm |
Input voltage range | 6 – 12V at 500 mA (3s Lipo Ideal) |
Includes:, Duo5800 Receiver,
New V3 version with increased sensitivity and better video quality! ...ReadyMadeRC
1.2GHZ 1000MW 8CH WIRELESS A/V TRANSMITTER MODULE (LM-INTL)
Output Power | 1000mW |
Nominal output impedance | 50 ohms |
Operating voltage | 10.5-13V DC |
Supply current | 500mA (maximum) |
Sub carrier frequency | 6.5MHz |
Dimension | 50 x 26 x 13mm |
Weight (transmitter only) | 20g |
Includes | Transmitter |
Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Lawmate 1.2Ghz 1000mW AV Transmitter (INTERNATIONAL UNLOCKED VERSION) A high ...ReadyMadeRC
STOCK LAWMATE 5V A/V CABLE WITH BUILT-IN 5V REGULATOR
,
This is the cable that comes with the Lawmate 5V ...ReadyMadeRC
SKYLARK AAT ANTENNA TRACKER III
,
Features No tools needed for assembly Tracks 360º horizontally and ...ReadyMadeRC
PRO TRICOPTER DELRIN KIT V1.2
Frame parts made from precision laser cut Delrin | 3 Motor mounts, complete Yaw mechanism, 2 main body frame parts |
. Kit frame and motor mounts | 150g, kit hardware |
Includes all frame and motor mounting hardware | screws, nuts, ball bearings, servo to motor pushrod using ball links, Yaw axle, and stand-offs |
Weight:, Fully flight ready built kit with all electronics, flight controller, motors, escs (without battery) weighs,
Quick Overview The v1.2 Pro Tricopter Delrin Kit by fpvmanuals ...ReadyMadeRC
2.4 GHZ BLUEBEAM WHIP ANTENNA SET (RHCP) RIGHT ANGLE
Contains TWO antennas | 3 lobe TX, and 4 lobe RX with Right Angle SMA connectors |
2.4GHz | 110 mph |
Connector type | SMA male, Right Angle |
Whip length | 2″/5cm |
Max speeds without significant deflection:, Note:, Foxtech will require an RP-SMA female to SMA female adapter, Radiation pattern:,
The BluBeam antenna set is a direct fit circularly polarized ...ReadyMadeRC
OPTICAL RPM SENSOR FOR ELOGGER
Meeasures your RPM without need for installing magnets. Note: This version is for the eLogger V3 and the V2, which we have been selling since early 2006. The eLogger V2 has the large white letters "V2",
Optical RPM Sensor For eLogger V3 & V2 (OPT-RPM) (or ...ReadyMadeRC
2500MW 1300MHZ TRANSMITTER - US VERSION - OLD STYLE
,
The last one in stock is locked on 1280MHz for ...ReadyMadeRC
RMRC-PICO-WIDE 12V (6-24V) ULTRA COMPACT WIDE ANGLE NTSC
,
NOW WITH A WIDER ANGLE VIEW! 90 degree verses the ...