ngHobbies
FAT SHARK QVGA SPYHAWK GOGGLES
| Field of view (FOV) | 20 degrees diagonal |
| Interpupillary distance (IPD) | 63.5mm fixed |
| Power supply | 7-13V(2S/3S battery) |
| Battery | 7.4V, 2 cell Lithium Polymer |
Please note:, Fat Shark is not compatible with other chinese brand transmitters. Fat Shark can only guarantee compatibility with Fat Shark and ImmersionRC transmitters., Fat Shark QVGA Spyhawk package includes:, QVGA headset with integrated 5G8 Nexwave receiver (no head tracking)., Specifications:, , Optics:, Audio:, Stereo, User Controls:, Up/Down Channel selection, Electrical:, Power consumption:, 300mAh in wireless mode, Antenna:, External, circular polarized spironet receiving antenna, Display:, Full color binoculad QVGA LCOS display (230k pixels), Interface:, 3.5mm AV in/out port,
The Fat Shark QVGA Spyhawk goggles with built in high ...ngHobbies
5" DISPLAY DVR WITH BUILT IN 5.8GHZ RECEIVER FOR DJI/BOSCAM
| Display | 5 inch diameter, anti-glare, 200cd/m2 brightness, 800x480 pixel resolution. |
| Size | 131x86x18mm |
| Weight | 205g with built in battery |
| TV System | NTSC/PAL autosensing |
| Channels from 1 through 8 | 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945MHz |
| Sensitivity | -88dB |
| Recording resolution | 720x480 (NTSC) or 720x576(PAL) |
| Compression | MPEG4 - format MPEG-AVI |
| Storage | Micro SD card (not included) |
| Maximum Size | 32Gb |
| Maximum recording time | 10-32 hours depending on the size of the Micro SD card |
| Photo storage | 15625 pictures (Max) |
| Battery Type | Li, 3200 mAh |
| Wireless recording time | >9.5 hours (with display off), >5 hours (with display on) |
| Wired recording time | >12 hours (with display off), >6 hours (with display on) |
| Charger | 110V DC charger included |
| USB | Charging can be done through a USB cable connected to a computer |
| http | //vimeo.com/62671697 |
Display Specifications:, Receiver Specifications:, Recording specifications:, Storage specifications:, Battery specifications:, Charging specifications:, External antenna options:, As seen on the pictures below an external antenna adapter cable is included in the package. The antenna cable terminates in RP-SMA connector, please use, Demo recording:,
We are proud to introduce the 5" Display Mini DVR ...ngHobbies
FAT SHARK DOMINATOR HD 800X600 - PREORDER
| - Audio | Stereo |
| - User Controls | Mode selection, Channel Selection, Contrast, Brightness, 2D/3D, DVR Control, HT control |
| - Supply power | 7-13V |
| - Power consumption | 350mA wireless more, 200mA direct mode (No RX) |
| - Weight | 220g |
| - Display | Two full color Kopin CyberDisplay modules |
| - Color arrangement | vertical stripe |
| - Resolution | 800x600 SVGA |
| - Interface | A/V port, hedtracker port, battery port. |
| - Video signal | NTSC/PAL Autoselecting |
This new version has the followig benefits:, - Two separate rubber eye patches, The Dominator Edition Includes:, Dominator headset, battery, Product Specification:, - FOV 45 degrees diagonal, Accessories:, - Headtracker module:, Click here to order, - 2.4GHz receiver module:, Click here to order, - 5.8Ghz receiver module:, Click here to order, - replacement rubber eyepatch:, Click here to order,
The new Fat Shark Dominator HD Edition is available for ...ngHobbies
8" FPV DISPLAY WITH DUAL DIVERSITY 32CH 5.8GHZ RX
| The display is a 16 | 9 aspect ratio, but the incoming video can be configured to 16 |
| Panel size | 8.0 inch |
| Panel type | TFT LCD |
| Resolution | 800×480 |
| Backlight | LED |
| Horizontal frequency range | 30～ 60 kHz |
| Field frequency range | 50 ～75 Hz |
| Dot pitch | 0.0642（W）×0.1790（H）mm |
| Brightness | 400cd/㎡ |
| Contrast ratio | 500 |
| Response time | 15 ms |
| Viewing angle | 70°/70°(L/R) 50°/60°（U/D) |
| Power requirement, input voltage | DC 6 ～18V middle pin positive |
| Power consumption | ≦ 7W |
| Operation temperature range | -20℃～60℃ |
| Storage temperature range | -30℃～70℃ |
| Dimension Unit size | 209（L）×147(W)×35(H) mm |
| Unit weight | 540 g |
| Connector type | RP-SMA ( |
NGHobbies is happy to bring you this 5.8Ghz dual diversity 8" FPV display specifically designed for FPV purposes as this display will not go "blue screen" when the wireless signal drops out for a few seconds. This is the first ground station monitor, designed specially for FPV outdoor use. With its high resolution (800*480), high contrast ratio (500:1) and brightness of 400cd/ ㎡ this is really the best choice for theFPV flyer who chooses to fly with a monitor instead of goggles., Specifications:, Display ratio: 16:9, Number of channels on 5.8Ghz: 32, Documentation:, Dip switch reference guide for channel selection,
The included sun shade, allows to lock the sun out ...ngHobbies
900 TVL FATSHARK WDR NTSC CAMERA (BETA)
,
This is a brand new 900TVL camera from Fatshark. This ...ngHobbies
FORCEFLY
| http | //nghobbies.com/forum/index.php?topic=100.0 |
Demo Video:, Features:, Fully programmable flight control:, Control the aircraft roll, pitch, and yaw (twist grip) with one hand, as well as throttle, programmable settings allow complete configuration of each axis – travel adjustment, dual rates, exponential, reverse, trim, etc., Force feedback control:, Active force feedback – pushes the flight stick according to changes in aircraft attitude, Gyro Stabilisation:, Mixes gyro feedback directly to control axes to provide automatic gyro flight stabilization, Model memory:, Save up to eight different models in the ForceFly, PPM Channel Assignment:, Assign any axis to any output channel, Interface ports:, Optional head tracker interface (also for future expansion), Pacakge content:, - ForceFly circuit, Fully Supported Joystick:, - Logitech G940 Flight System (Highest Recommandation), Limited Support for:, - Microsoft Sidewinder 2, Documentation:, Quick Start Manual:, Click here, Detailed user guide on Wiki:, Click Here, Support thread:, New Firmware:, On October 7th, 2011, Version 1.10 firmware has been released. The firmware can be uploaded to all revious Forcefly versions as well using the PicKit 3 programmer kit, available here:, Pickit 3, A full documentation for the firmware upgrade procedure is still pending, till then you can download the firmware by clicking on the following link:, Download Firmware Version 1.10,
The ForceFly is another exciting FPV tele-presence product from EMR ...ngHobbies
FATSHARK DOMINATOR 2.4GHZ RECEIVER MODULE
,
This is a plugin 2.4Ghz receiver module for the Fatshark ...ngHobbies
RECOM 6.5V/1A SWITCHING VOLTAGE REGULATOR
,
INNOLINE converters are RECOM's line of innovative high efficiency stepdown ...ngHobbies
4 CHANNEL VIDEO SWITCH
| http | //www.vimeo.com/4449555 |
- Additional safety feature: In case the RC signal is lost, the device will switch back to Input 1 after about 2.5 seconds. The rationale behind this is the following: In case you have a forward and a backward facing camera, and you loose RC control while looking backwards, the device will switch back to the forward facing camera (assuming that this is connected to Input A) in order to allow you to look forward and resume flying the plane with forward view once you regain control. This feature is always useful to notify you that you are dangerously close to loose RC control of your plane., Demo Video :, Manual:, Setup and Utilization Manual,
The 4 Channel Video switch will allow you to switch ...ngHobbies
GOPRO HD (1 & 2) FPV AUDIO/VIDEO CABLE
feed from a GoPro Hero HD camera to an FPV video transmitter. The 2.5mm right angle jack fits the GoPro Hero cameras AV plug and the servo type connector has the following connections:, Yellow (Orange) - Video out, Second connector:, Yellow - Audio out,
This cable offers FPV audio and video Red - Not ...ngHobbies
EASY STAR FPV PAN/TILT POD KIT
Comes with a mounting plate that will fit many popular FPV cameras including: KX131, KX171, KX191, IF Cam, SN777, SN555 and others. Additional back plates may be purchased here to fit IF OSD Cam, DPC OSD Cam, DX201, Note:, careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit includes:, Laser cut components for the main pod, You'll need:, Double sided servo tape to apply TX, camera, and tilt servo., Documentation:, Instructions to build the pan and tilt:, Click here, Instructions to build the EzPod:, Click here,
an Easy Star FPV pod that uses a custom mechanism ...