ReadyMadeRC
CUSTOM 1.3 FPV STARTER PACKAGE: 1258/1280MHZ US VERSION
| Instructions | HERE |
Package starts with the following components:, , NOTE: if you purchase the "no camera" option, the transmitter will only come with the "stock" cable and does not include the custom ReadyMadeRC cable used for attaching it to the rest of the Ready Made RC cables or transmitter battery., *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. Frequencies not allowed in the US will be disabled for those items shipped to US addresses.,
Eagle Tree OSD Pro-Ready...see option below! Using the new line ...ReadyMadeRC
2.3 GHZ 10DBIC RHCP CROSSHAIR ANTENNA (IBCRAZY)
| Frequency | For 2.3GHz channels only! |
| Weight | 0.4lbs (.2 kg) |
| Size | 5.5"x5.5"x2" (14x14x |
ReadyMadeRC
AEROSIM RC FLIGHT SIMULATOR
| http | //vimeo.com/11409098 |
| http | //www.youtube.com/watch?v=lMVr1nE58WU |
| http | //www.youtube.com/watch?v=g110XcnWwFY |
| There are two Training Programs | (1) Airplane, and (2) Helicopter/Multicopter. |
The USB interface is fitted with a 3.5 mono jack that can be directly used with JR/Spektrum/HitecAurora/Turnigy/GraupnerMX. An adapter is required for other transmiters (sold separately), consisting on a short cable with a female 3.5 mono jack on on one end, and the right type of connector for the particular transmitter on the other end. Available connectors include: Futaba Square Plug, DIN6 for Futaba Round Plug and Hitec, Multiplex (DIN5, compatible with DIN7 and DIN8), Graupner with Trainer Socket (jack 3.5mm stereo), and ESky/WFly/Storm (minDIN4)., Please, watch these simulated FPV videos:, FPV flight:, This is the video created by Holger, showing the performance of the MK models in the simulator:, Here is the MK promotional video:,
Description This high quality RC flight simulator includes a CD ...ReadyMadeRC
MULTIPLEX LARGE TRAINER ADAPTER FOR TSLRS V6 TX
,
A high quality trainer adapter cable with a military grade ...ReadyMadeRC
8W V6 PRO BOOSTER FOR 433MHZ DIGITAL SYSTEMS
| FEATURES of V5 | added safety and security |
Vin, Current in, RF Power Out, Efficiency:, 9.0V 2.58A 9.12W 39% DO NOT GIVE UNIT OVER 8V, Different cable types have different loss, here is the max length allowed using different cables:, RG-58CU 18meters (59ft), Old 3xx rx firmware:, The ultra sensitive receiver will be blocked/jammed if distance to booster antenna is under 10-20meters so avoid that !, NEW 307-308 or higher RX firmware:, No more blocking problems, an RX can be as close as 25cm (10 inch) from a booster at 7W before minor blocking is detected., WARNING:, Power supply MAX is 8.4V, max supply current 2.5A, newer ever exceed that., Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Here is the NEW PA Booster version 6 PRO, again ...ReadyMadeRC
GPS RECEIVER FOR DRAGONOSD+ V2 - NEW VERSION!
,
GPS Receiver for DragonOSD Latest improved GPS with updated LS20031 ...ReadyMadeRC
DRAGONOSD+ V2 (MAIN UNIT, NO GPS OR CURRENT SENSOR)
| This package includes | Dragon OSD V2 |
ngHobbies
PAN AND TILT MOUNT FOR CMOS CAMERAS
,
This is servo mount was designed specifically for the CCD ...ngHobbies
FATSHARK EXTENDED BATTERY
,
This is the new 1000mAh extended LiPo battery from Fatshark. ...ngHobbies
900MHZ STANDARD RECEIVER
| CH1 | 910 MHz , CH2 |
| CH3 | 1010 MHz, CH4 |
Features:, Frequency Band:, 900MHz, Number of Channels:, 4, Channels:, Video Output:, 75 Ohm, RCA, Power Consumption:, 240mA, Audio Output:, 10k Ohm, RCA, Power Supply:, 12V/500mA, Antenna Connector:, SMA Connector, Weight:, 140 g, Dimensions:, 115 x 80 x 21 mm, Documentation:, , Warranty:, 6 months, Note:, Please note this receiver comes without a power supply.,
Highly integrated mini 900MHz receiver. Compact size. Manual channel switcher. ...ngHobbies
LENS F2.8MM
| Field of view is | 115 degrees. |
ngHobbies
CONNECTOR CABLE SET 6XX
Audio/Video Pigtail:, Black - Ground -, Power Connector Pigtail:, Black - Ground -,
This package is an option if you would like to ...ngHobbies
ALTIMETER V4
The Eagle Tree tiny new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude., Manuals:, eLogger Manual,
This sensor measures altitude with approximately 3 foot (1 meter) ...