SDSHobby
DLA112 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 112CC FOR GAS AIRPLANES WITH DOUBLE CYLINDERS AND NSK BEARING
| Exhaust Amount | 112CC |
| Power | 11.5HP/7500rpm |
| Idle speed | 1400rpm/min |
| Pull Force | 24.5kg/100 meters Altitude, 21kg/1800 meters Altitude |
| Diameter* Stroke | 45.1* 35mm |
| Recommended Propeller | 26* 12, 27* 10, 28* 10 |
| Spark Plug | DLA CM6 |
| Weight | Main engine 2510g; Muffler117g; Ignition 120g |
Parameters & Performance:, Lubrication Ratio: 30: 1 (Trial Run), 40: 1~50:1(Normal Flying), Included Spare Parts:, 1 x DLA112CC Engine,
This product has stopped production. You can buy its upgraded ...SDSHobby
DLA58 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 58CC FOR GASOLINE AIRPLANES WITH WALBRO CARBURETOR AND NSK BEARING
| Power | 6.0HP/8500rpm |
| Idle Speed | 1300 rpm/min |
| Pulling Force | 15Kg / 100 meters Altitude (14.2kg for DLE55) |
| Recommended Propeller | 22x8, 22x10, 23x8, 23x10 |
| Sparking Plug | DLA CM6 |
| Carburetor | Walbro (made in Japan) |
| Exhaust Amount | 58cc |
| Diameter*Stroke | 46mm*35mm |
| Ratio of Compression | 7.8 |
| Weight | Main Engine-1310g, Exhaust Pipe-110g, Ignition-135g |
| Material of Muffler and crankcase | Aluminum Magnesium Alloy (Aluminum Alloy for DLE55) |
| Machining | CNC processed, while others are not. |
| Crank Case Material | the newest aero material makes DLA58 engines too hard to be damaged. |
Parameters & Performance:, Ratio of Lubricating Capacity: 30:1--40:1 (Trial Run), 40: 1--50:1(Normal Flying), Included Spare Parts:, 1 x DLA 58CC Engine, Features:,
13.5Kg / 1800 meters Altitude (12.5kg for DLE55) 1 x ...SDSHobby
DLA64 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 64CC FOR GAS AIRPLANES WITH DOUBLE CYLINDERS
| Power | 7.2HP |
| RPM Range | 1400~8500 |
| Diameter stroke | 37mm*30mm |
| Ratio of compression | 7.8 |
| Weight | Main engine -2485g, muffler-65g*2pcs, Ignition-180g |
Parameters & Performance:, Pulling Force:, 15.6kg/100meters Altitude, 13.8kg/1800meters Altitude, Propeller:, 2*10, 23*10, 23*8, Spark Plug:, DLA CM6, Exhaust Amount:, 64CC, Lubrication Ratio: 25:1~30:1 (Trial Run), 40:1~50: 1(Normal Flying),
,4*8SDSHobby
LED SLIDE SWITCH + SAFE PROTECTIVE COVER/ EMULATIONAL STARTING SWITCH
| Input voltage of LED switch | DC 12V |
| Attention | Color will be sent randomly. |
Product Description:, Application: suitable for DIY some electronic equipment, also use for fire control switch on the plane, missile launching switch and forcing burner switch etc.. Now it is widely used on automotive refit.,
HobbyKing
SERPENT S100 LT 1/10 PANCAR (KIT)
• Front end: The front end of the car features 11 different adjustments to help you get the most from your car, all of which are easy to adjust and measure. Fixed lower suspension arms are themselves damped by the central strut which uses rubber o-rings to take up the flex in this area, while the grey anodised aluminium front upper wishbone mounts are available in different caster angles, the car being supplied with 6 degree versions as standard. With the steering block king pins spring loaded, the cornering forces are channelled through the upper wishbone, which enable the car to corner at high speeds., • Tube system: The S100-LT uses the same tube-system as on the S120-LT. Precision machined aluminium coated tubes connected with small ball-links. This system plays a big part in how the car turns into a corner which can be adjusted through the use of different oils ., • Central section: The spring-loaded side-bars, the links, are made of composite nylon and control the roll of the chassis, together with the lateral damper and the main central shock., • Servo saver: The S100 WGT comes supplied with a high quality miniature servo saver, which through the use of orange anodised shims, has adjustable Ackerman. The kit includes 3 alloy servo posts to select from, which enable perfectly centered mounting of any popular brand servo., • Rear axle mounts: The lightweight graphite rear axle is mounted on bearings that sit within eccentric composite inserts that allows the user to ability to quickly and easily change the rear ride height of the car simply by changing between inserts. The kit comes supplied with all 9 inserts which range between 0 and 4mm, each differing by 0.5mm and all are reversible for an even wider range of adjustment., • Rear motor pod, chassis: The strong basis is formed by the 2.5mm thick carbon fibre chassis plate with pockets to allow for a 1S Lipo pack or a 2S lipo-pack, with supports enabling a forward or backward battery position, and enough space for all the valuable electronics., Chassis:, Rear axl,
HobbyKing™ is now carrying another famous brand - Serpent! Both ...HobbyKing
HOBBY KING BRUSHLESS CAR ESC 100A W/ REVERSE (UPGRADE VERSION)
| Cont. Current | 100A |
| BEC output | 3A /5.5V (switch) |
| Size( length X width X high) | 47x41x29mm |
| Weight | 95g |
Features:, Full protection feature including low voltage, over-heat, throttle signal lost, startup, Specification:, Input voltage:, 5V-17V (support 2-4S lithium batteries),
Hobby King upgrade version ESC provide more power support to ...5 Reviews
HobbyKing
HOBBYKING BRUSHLESS CAR ESC 60A W/ REVERSE
| Input voltage | 2-4S Lithium batteries / 4~15 Ni-xx |
| Cont. Current | 60A |
| BEC output | 3A/5V (Switch) |
| Size( length X width X high) | 47x41x29mm |
| Weight | 82g |
Features:, Full protection feature including low voltage, over-heat, throttle signal lost, startup, Specification:,
Standard 60A car esc with forward reverse and a good ...5 Reviews
HobbyKing
HOBBYKING BRUSHLESS CAR ESC 30A W/ REVERSE
| Input voltage | 2-3S Lithium batteries / 4~9 Ni-xx |
| Cont. Current | 30A |
| BEC output | 2A /5V (Linear) |
| Size( length X width X high) | 45x32x20mm |
| Weight | 51g |
Features:, Full protection feature including low voltage, over-heat, throttle signal lost, startup, Specification:,
A standard car esc. providing forward and reverse with a ...5 Reviews
HobbyKing
BMS-373 MICRO SERVO 1.5KG / .13SEC / 9.2G
| Weight | 9.2 grams / 0.34oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.5kg/cm , 22 oz/in |
| Speed At 4.8V | 0.13sec / 60 deg at no load |
5 Reviews
HobbyKing
TURNIGY MINI SERVO 16G/2.1KG/.11SEC
| Model | TR-1160A |
| Speed | 0.11sec |
| Torque | 2.1kg/cm |
| Weight | 16g |
| Size | 29.6x28x13.2mm |
Voltage:6v,
Mini analog servo. Precise, jitter free response for small parkflyers ...5 Reviews
HobbyKing
BMS-373BB MICRO SERVO (BALL BEARING) 1.6KG / .12SEC / 9.6G
| Weight | 9.6 grams / 0.38oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.6kg/cm , 22 oz/in |
| Speed At 4.8V | 0.12sec / 60 deg at no load |
5 Reviews
HobbyKing
BMS-385DMAX DIGITAL SERVO (METAL GEAR) 4.2KG / .15SEC / 16.5G
| Weight | 16.5grams / 0.59oz |
| Dimensions | 26 x 13 x 26 mm / 1.16 x 0.51 x 1.02 inch |
| Torque At 4.8V | 4.2kg/cm , 57 oz/in |
| Torque At 6.0V | 4.7kg/cm , 62 oz/in |
| Speed At 4.8V | 0.15sec / 60 deg at no load |
| Speed At 6.0V | 0.13sec / 60 deg at no load |
5 Reviews
HobbyKing
610MM ROTORTECH 3D LUMINOUS NIGHT MAIN BLADES
| Length | 610mm |
| Width | 57mm |
| Grip | 12mm |
| Hole | 4mm |
5 Reviews
HobbyKing
HOBBYKING BRUSHLESS CAR ESC 45A W/ REVERSE
| Input voltage | 2-3S Lithium batteries / 4~12 Ni-xx |
| Cont. Current | 45A |
| BEC output | 2A/5V (Switch) |
| Size( length X width X high) | 45x32x20mm |
| Weight | 60g |
Features:, Full protection feature including low voltage, over-heat, throttle signal lost, startup, Specification:,
Standard 45A car esc with forward reverse and a good ...5 Reviews
HobbyKing
TURNIGY SPEED CONTROLLER PROGRAMMING CARD
Notes:, The programming card will not work with similar ESC found in other stores.,
This Turnigy Programming card is compatible with the following TURNIGY ...5 Reviews