BevRC
FRSKY TFRSP- FUTABA FASST COMPATIBLE WITH SPPM AND RSSI PORT
| FASST 2.4G Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc. |
| Number of Channels | up to 10 channels (CPPM for CH1~CH9, servo signal for CH5~CH10) |
| Operating Voltage Range | 3.5V~10V |
| Operating Temperature Range | -10℃~60℃ |
| Dimension | 53mm*30mm*11mm |
| Weight | 13.5g |
| Note | Increased duty means good signal reception, and vice verse. |
1.1 Compatibility:, 1.2 Specifications:, Warning: Servos are not to be plugged into Channel CPPM and Channel RSSI, otherwise servos will get hot or may burn out., 2.1 Bind procedure:, Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and the receiver is operating normally., 2.2 Setting failsafe:, TFRSP supports failsafe function for all channels. Follow the steps below to set failsafe:, 1) Bind the receiver first, and disable failsafe on the transmitter side;, Warning: Some transmitter manufacturers use a failsafe method that can interfere with that used by FrSky. Be sure to disable any transmitter failsafe settings before setting FrSky failsafe positions. Unusual jitter may result otherwise., 2.3 LED status:, , Please find the how-to guide with the file named “Set up FrSky as a wireless trainer system” via the following link:, www.frsky-rc.com/download.asp?id=23,
Can be used with YS-X4 through one cable, using the ...BevRC
FRSKY BATTERY VOLTAGE SENSOR LITE
| FrSky D series accessories | serial cable |
| http | //www.frsky-rc.com/download.asp |
Introduction:, FrSky Battery Voltage Sensor is provided as Two Way Telemetry System’s Optional Accessory. There are three voltage ranges to choose: 1S lipo for battery voltage range from 0V~6.6V, up to 3S lipo for 0V~13.2V and up to 5S lipo for 0V~19.8V. Please check the battery voltage division ratio for each option below:, Recommended Voltage Option Max Lipo Pack Count Battery Voltage Division Ratio, 1S 1S 2:1, 2S 3S 4:1, 3S 5S 6:1,
Product Show FBVS-01 Category：Accessories Description More detail：HiModel
FRSKY UPGRADE CABLE FOR SENSOR HUB & DFT/DJT/DHT/8CH TELEMETRY RECEIVERS FUC-3
, , , , , , Specifications:, , , , , , , , , , , FrSky Upgrade Cable for Sensor Hub & DFT/DJT/DHT/8ch telemetry receivers FUC-3, , ,
Includes/Requires: Includes: 1 x USB PC cable set FUC-3HiModel
FRSKY TWO-WAY 2.4G 8-CHANNEL RECEIVER D8R-II PLUS
| Model | D8R-II plus |
| Weight | 16.2g |
| Dimension | 54*27*17mm |
| Operating Voltage Range | 4.0V-7.2V |
| Operating Current | 100mA |
| Specified Range | 1.5km (Ground Range) |
| Resolution | 11bit (3072) |
| Latency | 22ms |
| Number of Channels | 8CH |
| Analog voltage | 0~3.3V |
, , , , , , Specifications:, , , , , , , , , , , Receiver specifications:, Compatible with FrSky Two Way module DFT/DJT., (V8 receivers work with DFT/DJT, just in receive-only mode.), , ,
Features: THIS IS THE NEW D8R-II PLUS VERSION. Features a) ...2 Reviews
HiModel
FRSKY 2.4G 6-CHANNEL TWO WAY COMMUNICATION RECEIVER D6FR
| Compatible with FrSky two way telemetry modules | DFT, DJT, DHT, DHT-U |
| Dimension | 42*22*11mm |
| Weight | 7.1g |
| Operating Voltage Range | 4.0V-10.0V |
| Operating Current | 50mA |
| Specified Range | 1.5km |
| Resolution | 3072 (>11bit) |
| Frame Rate | 18ms (FS) |
| Please kindly follow the steps below to perform range check | (Note |
, , , , , , Specifications:, , , , , , , , , , , 1.1 Compatibility:, 1.2 Specification:, 9ms (HS), Setup, 2.1 Bind procedure:, 1) Turn your transmitter on and switch it to PPM mode (if not set). Turn your transmitter off., 2)Turn your transmitter on while holding the F/S button on the transmitter module (Please make sure that both switches on the transmitter module are OFF in two way mode) Release it in a few seconds. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the receiver., 3) Connect battery to the receiver while holding the F/S button on the receiver. The LED on the receiver will flash, indicating the binding process is completed., 4) Turn on the transmitter and connect battery to the receiver. The Green LED on the receiver will indicate the receiver is receiving commands from the transmitter., 2.2 Range check:, It is highly suggested to perform pre-flight range check. Caution must be paid when you perform range check in environment with metal fences, concrete buildings, or rows of trees. Loss of signal may be experienced from reflections., 1) Place the model at least two feet (60cm) above non-metal contaminated ground (like wooden bench)., 2) Place the receiver’s antennas apart. Do not let the antennas touch the ground., 3) Place the antenna of the transmitter in a vertical position., 4) Turn on the transmitter and receiver, press the F/S button of the transmitter for 4 seconds to enter range check mode, the RED LED of the transmitter module will be off, GREEN LED will flash rapidly, the BEEPER will sound. The effective distance will be decreased to 1/30 of full range., 5) Walk away from the model whi,
Features: Features: 1) Lighter in weight and smaller in dimension. ...HiModel
FRSKY 2.4G 8-CHANNEL TWO WAY COMMUNICATION RECEIVER D8R-XP
| Compatible with FrSky two way telemetry modules | DFT, DJT, DHT, DHT-U |
| Dimension | 55*25*14mm |
| Weight | 12.4g |
| Operating Voltage Range | 3.5V-10.0V |
| Operating Current | 100mA |
| Operating Range | full range (>1.5km) |
| Servo Frame Rate | 18ms (FS – Normal Speed Mode) |
, , , , , , Specifications:, , , , , , , , , , , 1.1 Compatibility, 1.2 Specifications, 9ms (HS – High Speed Mode), , ,
Features: Features 1) Two external analog telemetry ports (A1&A2) and ...HiModel
BATTERY VOLTAGE SENSOR FOR FRSKY TWO-WAY TELEMETRY SYSTEM
, , , , , , Specifications:, , , , , , , , , , , Battery Voltage Sensor for FrSky Two-way Telemetry System, , ,
Includes/Requires: Includes: 1 x Battery Voltage SensorHiModel
90 DEGREE ANTENNA ADAPTER FOR FRSKY 2.4G RF MODULE
, , , , , , Specifications:, , , , , , , , , , , 90 Degree Antenna Adapter for FRSky 2.4G RF Module, , ,
Includes/Requires: Includes: 1 x 90 Degree Antenna AdapterHiModel
FRSKY 2.4G 4-CHANNEL FASST COMPATIBLE RECEIVER TFR4-B
| Operating Voltage Range | 3.5V~10V |
| Operating Temperature Range | -10℃~80℃ |
| Dimension | 42*17*7mm |
| Weight | 4.6g |
| FASST 2.4G | Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode) (including 3PK, 4PK) |
| FrSky TF Modules | TF-8M, TF-14M |
, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 4, Compatibility:, Bind procedure:, 1) Ascertain that the transmitter is in the PPM mode. Turn the transmitter off., 2) Turn on the transmitter while holding the F/S button on the transmitter module. Release the button. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the receiver., 3) Connect the provided binding cable to corresponding channels of VD5M (see 1.1 Compatibility chart for details), and connect battery to the receiver. LED on the receiver will flash, indicating the binding process is completed. Turn off both the transmitter and receiver, and disconnect the binding cable from VD5M., 4) Turn on the transmitter and connect the battery to the receiver. The RED LED on the receiver will indicate the receiver is receiving commands from the transmitter., The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced., Note: Make sure corresponding channels are connected by provided binding cable when working with the transmitter module., , ,
Features: Features 1) Compatible with FASST 2.4G: Air Systems (7CH ...HiModel
FRSKY WIRELESS TRAINER CABLE FOR FUTABA TRANSMITTER WTC/1
, , , , , , Specifications:, , , , , , , , , , , FrSky Wireless Trainer Cable for Futaba Transmitter WTC/1, , ,
Features: This is the wireless trainer cable for TFRSP receiver ...HiModel
REPLACEMENT PLASTIC CASE FOR FRSKY RECEIVER TFR8
| Size | 54 x 30.3 x 15mm |
| Weight | 7.2g / 0.25oz |
, , , , , , Specifications:, , , , , , , , , , , Replacement Plastic Case for Frsky Receiver TFR8, , ,
Includes/Requires: Includes:1 x receiver case2 Reviews
HiModel
FRSKY LCD DISPLAY FLD-02 (UPGRADING VERSION FOR FLD-01)
| Model | FLD-02 |
| Compatibility | FrSky DFT, DJT and DHT |
| Dimension | 55*40*12mm |
| Pixel | 128*64 |
, , , , , , Specifications:, , , , , , , , , , , Compatibility:, Installation:, Connect FrSky LCD-fdd_lite to the four pins on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on telemetry module are OFF., , ,
Features: Features 1) Show all connected sensors data; 2) Capable ...HiModel
250MM LONG 2.4G RECEIVER ANTENNA FOR FRSKY SERIES RECEIVERS(2PCS)
| Length | 40cm |
, , , , , , Specifications:, , , , , , , , , , , 2.4G Receiver Antenna for Frsky Series Receivers, Also suit for other 2.4G receivers using same length antennas., , ,
Includes/Requires: Includes:2 x antennasHiModel
400MM LONG 2.4G RECEIVER ANTENNA FOR FRSKY SERIES RECEIVERS(2PCS)
| Length | 40cm |
, , , , , , Specifications:, , , , , , , , , , , 2.4G Receiver Antenna for Frsky Series Receivers, Also suit for other 2.4G receivers using same length antennas., , ,
Includes/Requires: Includes:2 x antennasHiModel
600MM LONG 2.4G RECEIVER ANTENNA FOR FRSKY SERIES RECEIVERS(2PCS)
| Length | 60cm |
, , , , , , Specifications:, , , , , , , , , , , 2.4G Receiver Antenna for Frsky Series Receivers, Also suit for other 2.4G receivers using same length antennas., , ,
Includes/Requires: Includes:2 x antennas