HobbyWireless
FPV582 PLUG AND PLAY 5.8 GHZ 200MW WIRELESS SYSTEM - NEW VERSION
| - Working voltage | DC 7.2 - 12v (9 - 12v performs better) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Current consumption | 180mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| Receiver's features | - Dual (2x) |
| - 8 Selectable channels | DIP switches |
| Frequencies | CH1 |
| - Working voltage | 8-12 VDC (runs cooler with 8V) |
| - Current consumption | 120mAh |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
Details:, Don't let the low cost for the system fool you. It can out perform many of more expensive systems sold out there., Transmitter's features:, - Output Power：23dBm, Includes:-, Note:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This another great option to those whom want to do ...HobbyWireless
TR905 COMBO SET RECEIVER +TRANSMITTER 900MHZ 500MW
Details:, This is a great set of 500mw 0.9 GHz (900 MHz), transmitter and receiver with a single audio and video output (receiver with dual output for audio and video is available as an upgrade)., Receiver Specs:, , Transmitter Specs:, , Channels:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
If you have a 2.4 GHz radio control system, and ...HobbyWireless
TR524 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 500MW - LAWMATE
Details:, , Note: The 2.4GHz video system can not be used with any 2.4Ghz radio transmitter, it migh cause severe interferences., Package Includes:, , Transmitter Specs:, , Receiver Specs:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a great set of 500mW 2.4 GHz transmitter ...HobbyWireless
TR313 COMBO SET RECEIVER +TRANSMITTER 1.3 GHZ 300MW
Details:, This is a great set of 300mw 1300 MHz (1.3 GHz), transmitter and receiver with a single audio and video output (receiver with dual output for audio and video is available as an upgrade)., Receiver Specs:, , Transmitter Specs:, , Channels:, , Notes:, All transmitters shipped to any addresses within US territory will have only the channel (1280 MHz) is available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
If you have a 2.4 GHz radio control system, and ...HobbyWireless
TR1024 COMBO SET RECEIVER +TRANSMITTER 2.4GHZ 1000MW - LAWMATE
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications,(for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Note: We do not recommend the use of 2.4 GHz video system, with any 2.4Ghz radio controlled vehicles. In this case our 900Mhz or 1.2Ghz systems are the right choice., Package Includes:, - Transmitter 2.4ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 2.4 GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
TR1012 COMBO SET RECEIVER +TRANSMITTER 1.2GHZ 1000MW - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| The system can be powered using any DC power source from 10.5 to 13 volts DC example | 3 cells lithium polymer battery works great. |
Details:, Do you want a powerful wireless systems that gives you more than 3 miles of range?, It's perfect for long range applications, (for RC models: it is recommended to install the transmitter as far as possible away from the model's receiver) Even with all this power it only weights around 1oz 30 grams ., Package includes:, -Transmitter 1.2ghz 1000mW with RCA cable for audio and video input., Transmitter Specs:, -1000mW RF output power 1.2GHz frequency band, Receiver Specs:, - Operating voltage from 10.5 to 13 volts DC - 240mA power consumption, Notes:, All transmitters shipped to any addresses within US territory will have only the Channel 8 (1280 MHz) available. In order to use it within USA an, Disclaimer:, Hobby Wireless is not responsible any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility., Avoid Permanent Damage:, Before applying power to your transmitter and receiver, double check for correct polarity. Also make sure the power source doesn't exceed 13.5 VDC which will not be covered by the warranty.,
Then, this is what you are looking for. This transmitter ...HobbyWireless
FPV524 PLUG AND PLAY 2.4GHZ 500MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Details:, This is a complete plug and play wireless system set, and within few seconds you have everything connected and working wirelessly., The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (2410 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
TX-V512 500MW 1.2 GHZ PLUG AND PLAY TRANSMITTER WITH WIRES - LAWMATE
| 6 channels | CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040 MHz. |
| Nominal output impedance | 50 ohms |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
| Weight | 18g (transmitter only) |
Details:, (We can't ship this item to US address, because the available channels are not legal in USA)., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Operating Voltage: 5.5 - 13 volts DC (to use with 12V camera you can only power the transmitter using 12V source, 3S 11.1V Lipo battery works great)., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This is a plug and play transmitter only, part of ...HobbyWireless
TX-V905 500MW 900 MHZ PLUG AND PLAY TRANSMITTER.
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 27g (transmitter only) |
Details:, This is an easy to use plug and play transmitter only, part of our FPV905 plug and play system., The plug and play board has lots of important features built-in such as:, , Channels:, CH1 910 MHz (USA), Features:, * 500mW RF output power Plug and Play., Specifications:, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV905 PLUG AND PLAY 900MHZ 500MW WIRELESS SYSTEM - CAMERA IS OPTIONAL
Details:, Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?, The plug and play board has lots of important features built-in such as:, - High quality microphone, The FPV905 transmitter can be powered through a JST connector using any DC power source from 10.5 to 13 volts (note: a 3s 11.1v lithium polymer battery can be used to power the system), Package includes:, - R900 high sensitivity receiver, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 1 (910 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Then what you will need is the FPV905 complete Audio ...HobbyWireless
FPV-PRO905 KIT 500MW 900MHZ DOUBLE RECEPTION - BEST 900 MHZ SYSTEM - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., For patch antennas position: Place each antenna opposing each other (back to back) pointing 45° or less towards the sky and your video reception will be fully covered front, above and behind., The plug and play board main features:, , Package includes:, - 1x Plug and Play transmitter 500mW 900MHzwith built-in microphone with, Specifications:, , Notes:, - The transmitter will have only the channel 1 (910 MHz) available to USA users to comply with FCC rules., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your ...HobbyWireless
TX-V1012 1000MW 1.2GHZ PLUG AND PLAY TRANSMITTER - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
| Weight | 40g (transmitter only) |
Details:, This is a plug and play transmitter only, part of our FPV1012 plug and play system., The plug and play board has lots of important features built-in such as:, - High quality microphone, Features:, , Specifications:, , Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
This combo uses PLL (Phase-Locked Loop) technology to prevent frequency ...HobbyWireless
FPV512 PLUG AND PLAY 1.2GHZ 500MW WIRELESS SYSTEM - LAWMATE - CAMERA IS OPTIONAL
| - Transmitter Dimensions | 27mm x 23mm x 13mm (including attached heat sink) |
Details:, , The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, - Transmitter 1.2Ghz 500mW, :, CH1-1080 CH2-1120 CH3-1160 CH4-1200 CH5-1010 CH6-1040, Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
(We can't ship this item to US address, because the ...HobbyWireless
FPV313 PLUG AND PLAY 1.3 GHZ 300MW WIRELESS SYSTEM - CAMERA IS OPTIONAL
| battery, (note | a 3s 11.1v lithium polymer battery can be used to power the system) |
Details:, Do you have a 2.4 Ghz Radio Control, and want to make a video with your model, without concern of interference?, The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:-, Note:, All transmitters shipped to any addresses within US territory will have only the Channel 2 1.280GHz (1280 MHz) available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Then what you will need is the FPV313 complete Audio ...HobbyWireless
FPV1012 PLUG AND PLAY 1.2GHZ 1000MW WIRELESS SYSTEM - LAWMATE - ALSO AVAILABLE TO USA CUSTOMERS - CAMERA IS OPTIONAL
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, It's a powerful and great option if you have a 2.4 Ghz Radio Control, thus not being in the same frequency we do recommed using, The plug and play board has lots of important features built-in such as:, - High quality microphone, Package includes:, , Specifications:, , Notes:, - The transmitter will have only the channel 8 (1280 MHz) available to USA users. Transmitters shipped to customers out of USA will have all channels available., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
a 1.2 GHz filter to clean any harmonics that can ...