RCModelScout.

ReadyMadeRC

RCA MALE TO RMRC SERVO STYLE CONNECTOR

,

ReadyMadeRC

RCA FEMALE TO RMRC SERVO STYLE CONNECTOR

,

ReadyMadeRC

JUMPER CABLE (VIDEO) FOR CAMERA AND TRANSMITTER CABLES

,

ReadyMadeRC

CAMERA CABLE (4-WIRE,6PIN FOR OLD VERSION RMRC-700XV)

PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera you need to use a regulator before the cable.,

ReadyMadeRC

CAMERA CABLE (4-WIRE, FOR CAMERAS WITH AUDIO)

Directly compatible with the following cameras:, RMRC-600XV, RMRC-540, RMRC-480, RMRC-420 (not 420xv), PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera you need to use a regulator before the cable.,

ReadyMadeRC

HORNET OSD + FY31AP (FY-31AP TRADE EDITION)

The telemetry data is as below:, , Relative altitude (Unit : m), Distance to take-off Point (Unit : m), The battery voltage of the video transmitter (Unit: V), Power battery voltage (Unit: V), Power battery current (Unit: A), The OSD can be controlled to show different display information via one spare channel of your radio Rx. There are 5 optional display modes controlled by the different PWM signals. You can use default mode if you do not want to change the display modes.(the 5 modes  separately are as following: A. All Information Displayed; B., The modes are shown as below:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, , The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, , :, GPS module:, The FY-31AP can be installed in the following aircraft :, , Any other configuration , please e-mail us for enquiry:, service@feiyu-tech.com, The FY-31AP has been tested to work with the following RC systems:, , Includes:,

ReadyMadeRC

M.I.G. TRACKER (MAGNETIC, INERTIAL, GYRO) (V4)

ReadyMadeRC

FAT SHARK PREDATOR VIDEO GLASSES

Package includes:, Predator goggles with integrated 5.8GHz receiver and MIG V4 head tracker, Optics:, Audio:, Stereo (optional headphones available, Electrical:, Antennae:, External (dipole included or circular polarized compatible), Mechanical:, Ergonomic molded headset, Head Tracker:, M.I.G. (magnetic/ inertial/ gyro) V4, Interface:, 3.5mm AV in/out port, Operating Frequencies:, 5.8 Ghz Receiver Module,

ReadyMadeRC

DT-3K HYBRID HEADTRACKER - FUTABA MINI SQUARE

ReadyMadeRC

DRAGONLINK 2 LONG RANGE UHF RC SYSTEM

Includes:, 1 Transmitter Module, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,

ReadyMadeRC

OSD PRO EXPANDER

All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, •GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction are configurable., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., The OSD Pro Expander has the following connections:, •Connection to the eLogger or Data Recorder,

ReadyMadeRC

FY-30A PRO INERTIAL FLIGHT STABILIZATION SYSTEM

FY30A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, - Level flight – When stabilization is activated, the FY-30A will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY30A can be used in the following fixed wing models:, • Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, RC Radio suitability:, The FY-30A has been tested to work well with the following RC system:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, The FY-30A can be operated in three flight modes modes:, - Mode 1: FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is turned off. The aircraft is completely under the control of the pilot., - Mode 2: 3D Control Mode. In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY30A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness., - Mode 3: Auto Stabilization mode. In this mode, the FY-30A will automatically command the aircraft control surfaces to maintain level flight at all times.,

HobbyKing

BA-4-IN-1CX MIXERBOARD (72MHZ SINGLE CONVERSION)

DPCAV

MALE-MALE CABLE FOR EAGLETREE OSD-PRO

,

DPCAV

RSSI BUFFER FOR OSD PRO

Specifications / Features:, Installation Instructions:, Click Me!, Cable Pin-Out Information:, Click Me!, Installation Video:, Click Me!,