DPCAV
GOPROHD HERO/HERO2 CAMERA CABLE, AUDIO & VIDEO
| Yellow | Audio (mono) |
| Orange | Video |
| Red | Not Used |
| Brown | Ground |
The wire color codes are as follows:, ,
This lightweight A/V (audio/video) cable is used to connect the ...DPCAV
GOPROHD HERO/HERO2 CAMERA CABLE, VIDEO ONLY
| Orange | Video |
| Red | Not Used |
| Brown | Ground |
The wire color codes are as follows:, ,
This lightweight video cable is used to connect the popular ...DPCAV
R/C CONTROLLED TRIPLE CAMERA SWITCH (3-WAY)
| Video Switch | Solid State 3-position Relay |
| Video Bandwidth | 10MHz |
| R/C Pulse Range | Industry standard 1.0mS / 2.0mS |
| Status Indication | Red / Green LED |
| Power | 4.5 - 5.5V (provided by R/C receiver) |
| Size | 1.15 x 0.95 x 0.20 inches (29 x 24 x 5 mm) |
| Weight | 6 grams |
| Installation Instructions | Click Me! |
Features / Specifications:, ,
This R/C system activated switch allows you to remotely choose ...DPCAV
R/C CONTROLLED DUAL VIDEO SWITCH (2-WAY)
| Video Switch | Solid State SPDT Relay |
| Video Bandwidth | 10MHz |
| Video Insertion loss | 0.1dB typical |
| R/C Pulse Range | Industry standard 1.0mS / 2.0mS |
| Status Indication | Red / Yellow LED |
| Power | 4.5 - 13V / 20mA (provided by R/C receiver) |
| Size | 1.3 x 0.9 x 0.20 inches (33 x 23 x 5 mm) |
| Weight | 5 grams |
| Installation Instructions | Click Me! |
Features / Specifications:, ,
This R/C system activated video switch allows you to remotely ...DPCAV
900MHZ PRO-SERIES A/V TRANSMITTER, 500MW
| USA model has one RF channel | 910MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
| Help! What else do I need? | Click Me! |
| 900MHz EMI/RFI Information | Click Me! |
For convenient installation, the TX905-PRO has a JST female power cable (compatible with several of our 3-cell LiPO batteries) and servo-style connectors on the camera and microphone cables. We've made it as ready to use as we could. Just add your compatible camera, battery, and A/V receiver (not included). Plus, a variety of optional accessories are available to make your installation as simple as possible:Click Me!, We also offer high quality 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here, Non-USA (export) model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Notice: Due to its high RF power, using the TX905-PRO in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.,
We've raised the bar again! This 900MHz wireless video transmitter ...DPCAV
WIRELESS VIDEO TRANSMITTER & OSD, FPV DEAL
| Item A | EagleTree eLogger V4 with 100 Amp sensor. |
| Item B | USB cable for eLogger firmware updates. |
| Item C | Eagle Tree OSD Pro Video Expander module. |
| Item D | GPS extension cable for kits shipped before June-2010. |
| Item E | eLogger GPS-V4 Expander module. |
| Item F | Eagle Tree OSD Pro cable Kit. |
| Item H | DPC-420A 420 line CCD color camera. |
| Item I | DPC-420A/480A camera interconnect cable. |
| Item J | TX9-500 900MHz / 500mW transmitter. |
| Item K | Dipole Antenna, +3dBi omni-directional. |
| Item L | Deluxe A/V cable for TX9-500 transmitter. |
| Item M | Male-male video adapter cable, |
This wireless OSD system will transmit graphic data and voice announcements that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand this system even further by using the low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Notice: Due to the 900MHz transmitter's high RF power, using it in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements of your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., . We have other battery choices so that you can select the best one for your application. More choices:Click Me, (3) The 900MHz A/V receiver is not included, but we offer fully compatible models that work great with this special package. Please look here to purchase them:click here, The video format is available in NTSC or PAL. If you are unsure which to choose then please consult this list:TV Video Standards., ,
Ok, so you've decided that you need the EagleTree OSD ...ngHobbies
FORCEFLY
| http | //nghobbies.com/forum/index.php?topic=100.0 |
Demo Video:, Features:, Fully programmable flight control:, Control the aircraft roll, pitch, and yaw (twist grip) with one hand, as well as throttle, programmable settings allow complete configuration of each axis – travel adjustment, dual rates, exponential, reverse, trim, etc., Force feedback control:, Active force feedback – pushes the flight stick according to changes in aircraft attitude, Gyro Stabilisation:, Mixes gyro feedback directly to control axes to provide automatic gyro flight stabilization, Model memory:, Save up to eight different models in the ForceFly, PPM Channel Assignment:, Assign any axis to any output channel, Interface ports:, Optional head tracker interface (also for future expansion), Pacakge content:, - ForceFly circuit, Fully Supported Joystick:, - Logitech G940 Flight System (Highest Recommandation), Limited Support for:, - Microsoft Sidewinder 2, Documentation:, Quick Start Manual:, Click here, Detailed user guide on Wiki:, Click Here, Support thread:, New Firmware:, On October 7th, 2011, Version 1.10 firmware has been released. The firmware can be uploaded to all revious Forcefly versions as well using the PicKit 3 programmer kit, available here:, Pickit 3, A full documentation for the firmware upgrade procedure is still pending, till then you can download the firmware by clicking on the following link:, Download Firmware Version 1.10,
The ForceFly is another exciting FPV tele-presence product from EMR ...ngHobbies
DIVERSITY DUO 5.8 RECEIVER
| Receiver sensitivity | -85dBm |
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 200 grams |
| Size | 80 x 100 x 23mm |
| Input voltage | 6 – 12V at 500 mA (3s Lipo Ideal) |
| Documentation | Coming soon |
Features:, A/V receiver with two (diversity) antenna inputs -,
The Immersion RC's Diversity Duo receiver is the best diversity ...ngHobbies
600MW 5.8GHZ COMBO
| Receiver sensitivity | -90dBm |
| Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz |
| Weight | 70 grams |
| Size | 72 x 43.5 x 11mm |
| Input voltage | 6 – 18V at 200 mA (2 or 3s Lipo Ideal) |
| Operating Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880MHz |
| Weight | 42 grams |
| Size | 45 x 28 x 18mm |
| Input voltage range | 8-12V |
The package contains:, 1 x Highly integrated mini 5.8GHz 600 mW transmitter with cooling fan, so it can be installed in closed spaces as well., Receiver:, A/V receiver with one antenna input, Transmitter:, 600mW output power, Documentation:, N/A, use the connection diagram in the photo below for connection clarification., Power Plug:, Middle pin positive, Manufacturer warranty:, 3 months from the date of purchase,
This is a combo deal for a plug and play ...ngHobbies
MINI 5.8GHZ RECEIVER
| Receiver sensitivity | -90dBm |
| Frequencies | 5720, 5740, 5760, 5780, 5800, 5820, 5840, 5860 and 5880MHz |
| Weight | 70 grams |
| Size | 72 x 43.5 x 11mm |
| Input voltage | 6 – 18V at 200 mA (2 or 3s Lipo Ideal) |
Features:, A/V receiver with one antenna input, Documentation:, N/A, see the below pictures for connectivity diagram and connection., Power plug:, Middle pin positive, Note:, This receiver may not be 100% compatible with Fatshark and Immersion transmitters even if the frequencies match.,
The Mini 5.8Ghz receiver is the smallest on the market ...ngHobbies
VIDEO OSD EXPANDER
All parameters available with the Eagle Tree eLoggers and Data Recorders + optional sensors will be supported for display on the OSD. Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more), Manual:, Click here,
The Eagle Tree OSD Expander provides a simple and easy ...ngHobbies
VIDEO OSD PRO EXPANDER
All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more), Advanced Features:, The OSD PRO advanced features include "RADAR," Voice Alerts, Return to Home,failsafe, and Waypoints., :, The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointingindicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction is configurable., Voice Alerts/Variometer:, Imagine hearing the status of your model through earbuds connected to your video receiver! The OSD Pro fully supports voice warnings and status updates, via theaudio channel of your video transmitter. Most of the available parameters can be programmed to provide voice alerts., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”. And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”. Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., Return to Home and Failsafe:, , Flight Simulator:, A built-in flight simulator is included, letting you fly the RADAR icon around the screen, controlling altitude, throttle and turns with your RC Radio. Since the control surfaces of your model will move at the same time, this feature makes it easier to configure Return to Home and test your alarms and settings, and is also fun on rainy days!, Waypoints:, Up to 3 waypoints (within visual range of the takeoff point) can be programmed into the OSD Pro, for aerial photography or just for fun. The locations of the waypoints are displayed on the RADAR display,
The OSD Pro is a powerful, modular, fully configurable Video/Audio ...