ReadyMadeRC
MPI COLLET PROP ADAPTER: 5/32", 4 MM SHAFT, 6MM PROP SHAFT
,
Collet type prop adapter for 5/32", 4 mm shaft. Fits ...HobbyWireless
M.I.G. HEAD TRACKER FOR FUTABA, DX8, FLYSKY, TH9B, IMAX 9X, TURNIGY 9X AND MORE...
| - Futaba | in general Futaba 7 series radios and above support the HT |
| Unsupported radios | - Hitec Aurora9 |
Details:, Fatshark came out with M.I.G, a new head tracking system that uses a combination of Magnetic Inertion Gyro, Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
sensors that self-corrects any drift. No need to be pointing ...HobbyWireless
FATSHARK DOMINATOR HEAD TRACKER MODULE
| - Futaba | in general Futaba 7 series radios and above support the HT |
| Unsupported radios | - Hitec Aurora9 |
Details:, This Head tracker module is specially and exclusively designed for the FatShark Dominator video glasses only., Known Supported radios:, - ezUHF (note ezUHF supports HT independently from the radio used, if your radio does not support HT, then can add HT via ezUHF, : The HT PCB can be easily damaged by accidentally applying voltage to the PPM line or vise versa, damage your radio. Fat Shark will not warranty any damage due to modified cables. Cables are inexpensive and in stock at most retailers.,
Thanks to the modular feature of Dominator video glasses, this ...HobbyWireless
TSLRS V6 PRO UHF TRANSMITTER - INCREASES THE RANGE OF RC RADIOS
| RF Power output | 0.5W or 1W or 2W. The 2W setting can now be used as long as you like. use selectable |
| Supply Voltage | 6-25V using internal switchmode converter also included inside the nice aluminium |
| Supply current | depends on input voltage, but input power is 3 times RF out power |
| Spurs | < 60dB and 80dB under carrier, improved new double low pass filter |
| Temperature range | -40C to +70C tested |
| Hitech Aurora 9, take out normal RF module and use module pins from left | 1=ppm, 2=supply, 3=GND (4 and 5 are not used) |
Details:, The New PRO version released Feb2012 is a improved version of the V5., Includes:, 1x Transmitter PRO V6 0.5-2W 433Mhz built in regulator,
New radio system, still compatible with older versions rx With ...RCTimer
RADIO FOR TELEMETRY AIR MODULE 433MHZ
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | 17mmx |
| Weight | 4.6g |
Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio for telemetry Air Module 433Mhz The RCTimer Radio ...RCTimer
RADIO FOR TELEMETRY GROUND MODULE 433MHZ
| http | //www.hoperf.com/upload/rf_app/HM-TRP.pdf |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| •Dimension | 17mmx59mm(no include SMA connector) |
| •Weight | 7.2g/17g(include antenna) |
Datasheets of HM-TRP module:, Documentation:, Radio Configurator:, Board schmatic:, Other,
RCTimer Radio for telemetry Ground Module 915Mhz The RCTimer Radio ...RCTimer
433MHZ RADIO TELEMETRY KIT
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | Air / Ground module(no include SMA connector) |
| Weight | Air / Ground module |
It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 433Mhz ; and in the following configurations:, serial board (for the air) and USB (for the ground)., Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio Telemetry Kit 433Mhz The RCTimer Radio telemetry system ...RCTimer
RADIO FOR TELEMETRY AIR MODULE 915MHZ
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | 17mmx |
| Weight | 4.6g |
Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio for telemetry Air Module 915Mhz The RCTimer Radio ...RCTimer
RADIO FOR TELEMETRY GROUND MODULE 915MHZ
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | 17mmx |
| Weight | 7.2g |
Documentation:, Radio Configurator:, Board schmatic:, ,
RCT Radio For Telemetry Ground Module 915Mhz The RCTimer Radio ...RCTimer
915MHZ RADIO TELEMETRY KIT
| Datasheets of HM-TRP module | http |
| http | //code.google.com/p/ardupilot-mega/wiki/3DRadio |
| http | //www.rctimer.com/download/RCTIMER_Radio.rar |
| Dimension | Air / Ground module(no include SMA connector) |
| Weight | Air / Ground module |
It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz ; and in the following configurations:, serial board (for the air) and USB (for the ground)., Documentation:, Radio Configurator(Air module need a USB-UART tool like FTDI to configure):, Board schmatic:, ,
RCTimer Radio Telemetry Kit 915Mhz The RCTimer Radio telemetry system ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR V4.0 W/DX5E
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,
Phoenix R/C Pro Simulator V4.0 w/DX5e When the rain clouds ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR V4.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,
Phoenix R/C Pro Simulator V4.0 When the rain clouds are ...Hobby-Lobby
SKYSCOUT P2GO
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | 3+ channel radio system |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...Hobby-Lobby
SKYSCOUT R2GO RTF
| Wingspan | 54.5 in (1384mm) |
| Overall Length | 38.6 in (980mm) |
| Wing Area | 372 sq. in. (34.0 sq. dm.) |
| Flying Weight | 24.5 oz (695 g) |
| Motor Size | 235-watt Brushless Outrunner (installed) |
| Radio | Hitec Lite 4 4-channel transmitter & Minima 6S receiver (included and installed, respectively) |
| Servos | (2) HS-55 servos (installed) |
| Speed Control | 18-Amp Brushless (installed) |
| Recommended Battery | 11.1V 3S 1300mAh LiPo (included) |
| Aileron | Optional |
| Elevator | Yes |
| Rudder | Yes |
| Charger | DC Balancing Charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Technical Specifications:,
Perfect airplane for both beginner and experienced pilots Combining the ...Hobby-Lobby
RAZZOR, ELECTRIC RACER, RECEIVER READY
| Assembly Time | Less than 1 Hour |
| Experience Level | Intermediate |
| Flying Weight | 10.6 oz (300 g) |
| Fuel Type | Electric |
| Is Assembly Required | Yes |
| Overall Length | 23.4 in (594mm) |
| Plane Type | Sport Planes |
| Power Plant Size | 180-280 Electric |
| Recommended Environment | Outdoor |
| Wing Area | 141 sq. in. (9.1 sq. dm.) |
| Wing Loading | 10.8 oz/sq ft (33.0 g/sq dm) |
| Wingspan | 24.4 in (620mm) |
Needed To Complete:, - 4+ channel transmitter, Technical Specifications:, Flaps: No, Retracts: No,
Fly on the cutting edge with the Razzor! The Razzor ...