HiModel
2-3S BALANCE CHARGER FOR LIPO/LI-ION BATTERIES PACK 320B
| Cell count | 2-3 cells |
| Input voltage | DC 10 to 18V, 1.2A |
| Balancing current | 200mA |
| Dimesions | 75x 45x 18mm |
| Weight | 110g |
, , , , , , Specifications:, , , , , , , , , , , Charge current: 1A, , ,
Features: Built-in cell balancer Balance while charge Reverse polarity protection ...HiModel
AOK BC168 1-6S 8A 200W SUPER SPEED BALANCE CHARGER/DISCHARGER
, , , , , , Specifications:, , , , , , , , , , , Input Voltage, , 11~15V DC, , Input Wattage, , 250W, , Charge Power, , 200W (33W x 6Cells), , Discharge Power, , 25.2W (4.2W x 6Cells), , Balance Power, , 200W (33W x 6Cells), , Charge Voltage Adjustable range, , 1.50V~4.20V ( Pre-set up 4.2V), , Charge current Adjustable range, , 0.1A~8.0A ( Pre-set up 1.0A), , Charge temperature alarm, adjustable range, , 20℃~80℃ ( Pre-set up 80℃), , Discharge Voltage adjustable range, , 2.00V~4.20V ( Pre-set up 3.80V), , Discharge current adjustable range, , 0.1A~1.0A ( Pre-set up 1.0 A), , Balance Voltage adjustable range, , 2.00V~4.20V ( Pre-set up 3.80V), , Balance current adjustable range, , 0.1A~8.0A, ( Pre-set up, 1.0 A), , Charge Voltage Precision, , ±0.001V, , Discharge Voltage Precision, , ±0.001V, , Balance voltage Prcision, , ±0.001V, , Charge shift efficiency, , ≥ 80%, , Charger consumed power, , ≤ 1.8W（12V 0.15A）, , Suitable battery type, , 1Cells ~ 6Cells, ( Working well with LiPo/ Lilo / Life), , Weight, , 750g, , Dimension, , 165X123X52mm, , , ,
Features: a. The charger is design for Li-polymer and Lithium ...HiModel
REDVEX 2-4S BALANCE CHARGER W/CIGARETTE CONNECTOR E0062
| Input | DC9V-15V, 3A |
| Charging current | 0.5-2A adjustable |
| Cell number | 2-4S |
| Power input connector | Cigarette lighter (male) |
, , , , , , Specifications:, , , , , , , , , , , Output short protection, Led indicators of charging status., , ,
Includes/Requires: Includes:1 x balance chargerHiModel
EV-PEAK 1-4S 3A LIPO/LION/LIFE BALANCE CHARGER AP403
| Input voltage | 11-18.0V |
| charge power | max. 35W |
| Charge current range | 0.1-3.0A |
| NiCd/NiMH battery cell count | 1 - 10cells |
| LiPo/LiLo/LiFe battery cell count | 1 - 4cells |
| Pb battery voltage | 2V～12V |
| Weight | 175g |
| Dimension | 116 x 75 x 25mm |
, , , , , , Specifications:, , , , , , , , , , , Balance current: , Balance tolerance: , , ,
Includes/Requires: Includes:1 x charger 1 x Alligator to DC cable ...HiModel
MAXPRO X304 QUAD 3S LIPO BALANCE CHARGER (FOR 3S LIPO ONLY)
| Input Voltage | 13.5 - 24V DC |
| Charge Current | 0.5 - 4.0A Adjustable in each channel |
| Max Power | 200W / 16A |
| Balance Precision | 10mV |
| DC input connector type | 4mm bullet male connector |
, , , , , , Specifications:, , , , , , , , , , , LCD Screen shows every cell voltage in each channel, , ,
Features: Supports 3cells Li-Polymer batteries ONLY, 4 Channels work respectively ...HiModel
EV-PEAK AC 220V INPUT 1-6S 4X 80W BALANCE CHARGER Q6320AC
, , , , , , Specifications:, , , , , , , , , , , AC/DC Multi Charger/Discharger, 80W X4 320W, AC Input voltage range 220V, DC Input voltage range DC 11.0V～18.0V, Charge current range 0.1A～7.0A, Discharge current range 0.1A～2.0A, Charge power limited 80Wx4, Discharge power limited 10Wx4, Balance current max.500mA, Balance tolerance ±0.01V, NiCd/NiMH battery cell count 1～16cells, Lithium battery types Li-Po, Li-ion,Li-Fe, Lithium battery cell count 1-6series, Pb battery voltage 2V～20V, , ,
HiModel
MAXPRO X3 QUINT 5 X 3S OUTPUT BALANCE CHARGER
| 1. Supported battery type | 3 cells Li-Polymer only |
| 2. Charge current | 1A to 3A adjustable each Channel |
| 3. Voltage detection precision | 10mv |
| 4. Max power | 190W/ 15A |
| 5. Power input | 13.5 to 24V64 |
| 6. Size | 155×78×22mm |
| 7. Balance connector type | HiModel/Align type and TP connector. (two set of balance connectors) |
, , , , , , Specifications:, , , , , , , , , , , Specifications, , ,
Features: Functions ◆ It can balance charge 5 packs of ...HiModel
G.T.POWER 1-4S LIPO BALANCE CHARGER P4 W/BATTERY CAPACITY DISPLAY
| Description | This is the G.T. Power P4 1-4S Balance Charger |
| Operating voltage range | 9-15 Volt |
| Charge current range | 0.5-2A |
| Net weight | 300g |
| Dimensions | 132×82×35mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: This is the G.T. Power P4 1-4S Balance Charger ...HiModel
G.T. POWER A6 1-6S A123/LIFE COMPATIBLE INTELLIGENT DIGITAL MULTIFUNCTIONAL BALANCE CHARGER/DISCHARG
| Description | G.T. POWER A6 BALANCE CHARGER/DISCHARGER |
| Operating voltage range | 10.0-18.0Volt |
| Circuit power | Max 50W for charging |
| Charge current range | 0.1-5.0A |
| Discharge current range | 0.1-1.0A |
| Current drain for balancing Li-Po | 300mAh/cell |
| NiCd/NiMH battery cell count | 1-15 cells |
| Li-ion/Polymer battery cell count | 1-6 series |
| Pb battery voltage | 2V,20V |
| Net weight | 400g |
| Dimensions | 165×130×45mm |
, , , , , , Specifications:, , , , , , , , , , , Max 5W for discharging, * Download the, USB driver & monitor software here, ., Multi-use wires:, , ,
Features: This is the G.T. Power A6 1-6S Fast Charging ...2 Reviews
HiModel
ICHARGER 4010DUO 10S X 2, 40A 2000W DUAL PORTS BALANCE CHARGER/ DISCHARGER
| ● Input voltage range | 9.0—50.0VDC |
| ● Maximum input current limit | <65A |
| ● Maximum charge power capacity | 2000W (Channel 1400W @input > 23.5V) |
| ● Maximum discharge power capacity | 200W (Channel 130W) |
| ● Maximum regenerative discharge power capacity | 2000W (Channel 1400W) |
| ● Maximum extra discharge power capacity | 3200W (Channel 1600W @40V/40A) |
, , , , , , Specifications:, , , , , , , , , , , ●, , Specifications:, ● Maximum charge/discharge current:, 70A@Syn, . Mode 40A@Asyn. Mode, ● Maximum current drain for balancing:, 2.4A@Syn, . Mode 1.2A@Asyn. Mode, , ,
Features: ● 4010DUO Special Features 1. The 4010DUO uses advanced ...HiModel
THUNDER 1-6S 5A LIPO/LIFE BALANCE CHARGER/DISCHARGER T6
| Operating voltage | DC 11~18 volts |
| Charge/discharge power | max. 50/5 Watts |
| NiCd/MH | 1~15 cells |
| LiIo/LiPo/LiFe | 1~6 series |
| Charge current | 0.1 to 5.0A |
| Discharge current | 0.1 to 1.0A |
| No. of cycle | 1 to 5 times |
| Battery data memory | up to 5 data |
| Weight | 260g |
| Dimension | 140*95*28mm |
, , , , , , Specifications:, , , , , , , , , , , Specification, Pb: 2~20V, , ,
Includes/Requires: Includes:1 x charger 1 x Balance harness for Align/HiModel ...3 Reviews
HiModel
2-6S 2X 200W/2 X 10A DUAL OUTPUT LIPO/LIFE BALANCE CHARGER/DISCHARGER D622-PRO
| - Input voltage | DC 11-18V |
| - Charge power | 2×200W |
| - Discharge power | 2×25W |
| - Charge current | 0.1-10.0A |
| - Discharge current | 0.1-5A |
| - Lilo/LiPo/LiFe battery cell count | 1-6cells |
| - NiCd/NiMH battery cell count | 1-18cells |
| - Pb battery Voltage | 2-24V |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes:1 x charger 1 x USB cable 1 x ...HiModel
IMAX HIGH PRECISION 1-6S 5A LIPO/NIMH/LIFE BALANCE CHARGER IMAX B6
| Dimension | 133L x 87W x 3.3H cm |
| Weight | 282g (net) |
| Input | DC11 to 18V, 5A |
| Max charging power | 50W |
| Charge current | 0.1A to 5A |
| Discharging current | 0.1 to 1A |
| Charging cell number | Li-PO 1-6S; NiCd/NiMh |
| Balance charging connector type | Align/HiModel battery type |
, , , , , , Specifications:, , , , , , , , , , , Max discharging power: 5W, , ,
Includes/Requires: Includes:1 x charger 1 x alligator DC cable 1 ...2 Reviews
HiModel
THUNDER 1-6S 100-240V 80WATTS DUAL POWER BALANCE CHARGER/DISCHARGER AC680
| AC in | 100V to 240V |
| Input | DC 11 to 18V |
| Charger power | 80 Watts, current is regulated accordingly. |
| Discharger power | 10 watts, current is regulated accordingly |
| Charge current | 0.1A to 6.0A |
| Discharge current | 0.1A to 2.0A |
| Battery data memory | up to 5 data |
| Cell count | 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V) |
| Dimensions | 146 x 135 x 56mm |
| Net weight | 730g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: This is the THUNDER 80Watts dual power input balance ...HiModel
SUNNYSKY X2204 1480KV OUTRUNNER BRUSHLESS MOTOR
| Model | X2204-1480KV |
| KV (rpm/v) | 1480 |
| Non-load current | 10V/0.1A |
| Weight | 19.3g |
| Length | 12.5mm/ 23.4 (without/ with prop saver) |
| Diameter | 27mm |
, , , , , , Specifications:, , , , , , , , , , , X2204 KV1480, , , , , , , , , , Testing data (for reference only) ：, , , , , , , , , , Propeller Type, , Voltage, , Current, , Thrust(G), , Power（W）, , G/W Ratio, , HD8040, , 6.4V, , 3.4A, , 190, , 21.76, , 8.73, , , , 7V, , 3.9A, , 240, , 27.3, , 8.79, , , , 7.4V, , 4.3A, , 280, , 31.82, , 8.79, , GWS9047, , 6.4V, , 5.7A, , 310, , 36.48, , 8.49, , , , 7V, , 6.3A, , 340, , 44.1, , 7.7, , , , 7.4V, , 6.9A, , 390, , 51.06, , 7.63, , , , , , , , , , , , , , , , , , , , , , , , , , X2204 KV1850, , , , , , , , , , Testing data (for reference only) ：, , , , , , , , , , Propeller Type, , Voltage, , Current, , Thrust(G), , Power（W）, , G/W Ratio, , HD8040, , 6.4V, , 6.5, , 310, , 41.6, , 7.45, , , , 7V, , 7.4, , 340, , 51.8, , 6.56, , , , 7.4V, , 8.4, , 380, , 62.16, , 6.11, , GWS8043, , 6.4V, , 7.9, , 320, , 50.56, , 6.32, , , , 7V, , 8.7, , 360, , 60.9, , 5.91, , , , 7.4V, , 9.4, , 410, , 69.56, , 5.89, , , , , , , , , , , , , , , ,
Features: Integrated prop saver and motor mount design. Includes/Requires: Includes:1 ...