HiModel
HIMODEL 350MAH / 7.4V 25C LIPOLY BATTERY PACK W/ BALANCER
| Size | 40 x 20 x 14 mm / 1.57 x 0.79 x 0.55 in |
| Weight | 21g / 0.73oz |
| Voltage | 7.4V |
| Capacity | 350mAh |
| Combination | 2S1P |
| Burst discharging rate | 40C |
, , , , , , Specifications:, , , , , , , , , , , Continuous discharging:, 25C, , Extreme low internal resistance., With balancing tap., Please read the, SAFETY AND USING INSTRUCTIONS, before purchasing and using the HiModel Li-poly batteries., , ,
3 Reviews
HiModel
HIMODEL 330MAH / 11.1V 25C LIPOLY BATTERY PACK W/ BALANCER
| Size | 40 x 20 x 21 mm / 1.57 x 0.79 x 0.83 in |
| Weight | 29.4g / 1.04oz |
| Voltage | 11.1V |
| Capacity | 330mAh |
| Combination | 3S1P |
| Burst discharging rate | 40C |
, , , , , , Specifications:, , , , , , , , , , , Continuous discharging:, 25C, , Extreme low internal resistance., With balancing tap., Please read the, SAFETY AND USING INSTRUCTIONS, before purchasing and using the HiModel Li-poly batteries., , ,
1 Reviews
HiModel
3.7V 240MAH LIPO BATTERY CP-Z-17
, , , , , , Specifications:, , , , , , , , , , , 3.7V 240mAh Lipo Battery CP-Z-17, , ,
HiModel
HI-EC 800MAH/11.1V 20C LI-POLY BATTERY PACK W/JST-CONNECTOR
| Size | 5.2 x 3.1 x 2.3 cm |
| Weight | 73g / 2.58oz (with T-shape connector) |
| Voltage | 11.1V 3S1P |
| Capacity | 800mAh |
| Connector | JST |
| Burst discharging rate | 28C |
, , , , , , Specifications:, , , , , , , , , , , Continuous discharging:, 20C, * 60 days warranty for puffing & low voltage (lower than 2.75V/cell)., , ,
HiModel
HI-EC 800MAH/11.1V 20C LI-POLY BATTERY PACK W/T-CONNECTOR
| Size | 5.2 x 3.1 x 2.3 cm |
| Weight | 73g / 2.58oz (with T-shape connector) |
| Voltage | 11.1V 3S1P |
| Capacity | 800mAh |
| Burst discharging rate | 28C |
, , , , , , Specifications:, , , , , , , , , , , Continuous discharging:, 20C, * 60 days warranty for puffing & low voltage (lower than 2.75V/cell)., , ,
HiModel
HIMODEL 70MAH / 7.4V 15C LI-POLY BATTERY PACK
| Size | 20 x 14 x 12mm |
| Weight | 5g / 0.18oz |
| Voltage | 7.4V |
| Capacity | 70mAh |
| Burst discharging rate | 25C |
, , , , , , Specifications:, , , , , , , , , , , Consistent discharging:, 15C, Please read the, SAFETY AND USING INSTRUCTIONS, before purchasing and using the HiModel Li-poly batteries., , ,
HiModel
HIMODEL 130MAH / 3.7V 15C LI-POLY BATTERY
| Size | 32 x 12.4 x 5.5mm |
| Weight | 3.4g / 0.12oz |
| Voltage | 3.7V |
| Capacity | 130mAh |
| Burst discharging rate | 25C |
, , , , , , Specifications:, , , , , , , , , , , Consistent discharging:, 15C, Please read the, SAFETY AND USING INSTRUCTIONS, before purchasing and using the HiModel Li-poly batteries., , ,
2 Reviews
HiModel
SUXFLY 4074/1050KV 4-POLES INRUNNER BRUSHLESS MOTOR 4074/4Y
| Model | 4074/4Y |
, , , , , , Specifications:, , , , , , , , , , , Type Model, , Max Amp(A), , Max Voltage(v), , Battery (Li-Po), , Max Power (W), , KV RMP/V, , Resistance, (Ω), , No-load Current（7.4V）, , Diameter×Length (mm), , Shaft diameter (mm), , Weight (g), , 4074/2Y, , 120, , 20, , 3-5 S, , 2600, , 2150, , 0.0062, , 1.8A, , Φ39.8×73.8, , Φ5.0, , 374, , 4074/2.5Y, , 100, , 24, , 3-6 S, , 2600, , 2000, , 0.0085, , 1.7A, , Φ39.8×73.8, , Φ5.0, , 374, , 4074/3Y, , 80, , 35, , 3-9 S, , 2600, , 1400, , 0.0130, , 1.2A, , Φ39.8×73.8, , Φ5.0, , 374, , 4074/4Y, , 65, , 45, , 3-12 S, , 2600, , 1050, , 0.0223, , 0.6A, , Φ39.8×73.8, , Φ5.0, , 374, , * Color of different batches may different, will send the color in random based on stock status., , ,
Features: Compare to conventional 2-pole motors, the 4-pole motors feature: ...HiModel
EZRUN-18A-SL BRUSHLESS ESC + 12T/2030 (7800KV) MOTOR + PRO-CARD COMBO FOR 1/18 CAR SPORTFUL
| ● eZRun-18A-SL | Continuous current 18A, burst current 50A. |
| ● eZRun-18A-SL | 6V/1A |
| ● eZRun-18A-SL | 0.01 Ohm |
| >=12T (Size | 2030) |
| ● eZRun-18A-SL | 31.5mm(L) * 24mm(W) * 15mm(H) |
| ● eZRun-18A-SL | 19g |
| Model | 12T/SL |
, , , , , , Specifications:, , , , , , , , , , , , 1 Specification of The ESC, , 1.1, Output:, 1.2, Input:, 4-9 cells NiMH/NiCd or 2-3 cells LiPo., 1.3, BEC Output:, , , 1.4, Resistance:, 1.5, Motor Supported:, Sensorless Brushless motor, 1.6, Suitable Brushless Motor:, 1.7, Suitable Car:, 1/18 scale car for portful race, 1.8, Size:, , , 1.9, Weight:, (Without wires), Motor Specs:, Top quality materials:, Aluminium shell (case), High quality magnets, Copper wires of high temperature endurance, Good quality bearings, Dustproof design., Low price but good quality., KV : 7800, Diameter(mm) ： 20.0, Length(mm Without Shaft)：30, Shaft(mm)：2.0, Shaft Length(mm)：10, , ,
Features: 3 Features 3.1 Compatible with all sonsorless brushless motor. ...HiModel
LEOPARD 5692/730KV 4-POLES INRUNNER BRUSHLESS MOTOR RED FOR 1/5 CARS LBP5692/3Y
| Model | LBP5692/3Y |
| Max Amps | 110A |
| Lipo Cell | 5-13s |
| Max Power | 5500W |
| KV(RPM/Volt) | 730KV |
| Resistance | 0.0130 |
| No-load Current（15V） | 1.7A |
| Diameter×Length (mm) | Φ55.8×92 |
| Mounting hole depth | 8mm |
| Length of extend Shaft | 20mm |
| Shaft Diameter (mm) | Φ6.0 |
| Weight | 880g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: - High efficiency up to 95% - Powerful 4-pole ...HiModel
LEOPARD 2-POLE 1100KV INRUNNER BRUSHLESS MOTOR LBP2860/5Y
| Model | LBP2860/5Y |
| Max current | 24A |
| Max voltage | 54V |
| Max Power | 1300W |
| Ideal current | 0.6A |
| KV(RPM/Volt) | 1100KV |
| Shaft Length | 12mm （outside the motor) |
| Diameter×Length (mm) | 28 x 64 |
| Weight | 176g |
, , , , , , Specifications:, , , , , , , , , , , Shaft Diameter (mm): 4, , ,
Includes/Requires: Includes:1 x motor 3 x connectorsHiModel
LEOPARD 2-POLE 3600KV INRUNNER BRUSHLESS MOTOR LBH3660/8T
| Model | LBH3660/8T |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes:1 x motor 3 x connectorsHiModel
EZRUN-35A BRUSHLESS ESC + 9T/3650 (4300KV) MOTOR + PRO-CARD COMBO FOR 1/10 ON-ROAD CAR SPORTFUL
, , , , , , Specifications:, , , , , , , , , , , * The speed controller and program card in the combo are V2 since 29/06/2009., , ,
Features: This combo is specially designed for 1/10 and 1/12 ...HiModel
HIMODEL 100A BRUSHLESS SPEED CONTROL FOR CAR W/REVERSE TYPE 100A-B
| · Weight | 68g |
| · Size | 56 x26 x28 mm |
| · Constant Current | 100A |
| · Max Current | 120A (for ten seconds) |
| · BEC | Yes, 2A |
| · PWM | 8 KHz ,16KHz,32 KHz |
| · Input | 2 to 3 Li-Po, or 5 to 8 Ni-MH/Ni-Cd |
, , , , , , Specifications:, , , , , , , , , , , · FET: 48, , ,
Features: Suit for 1:10 or 1:8 cars. - Forward-brake mode ...HiModel
5V/0.16A HIGH SPEED COOLING FAN FOR CAR ESC TYPE FAN-9904
| Input | 5V/0.16A, 7.2V Max; 4-5cells NiMH/NiCd or 2 cells LiPo |
| Size | 25mm(L) x 25mm(W) x 10mm(H). |
| Weight | 7.2g |
| For 4-6 Cell NiMhNiCd/ | You needn't change the normal voltage cooling fan coming with the ESC; |
, , , , , , Specifications:, , , , , , , , , , , How to Use, You need to choose different cooling fan in different applications., For 7-9 Cell NiMh/NiCd: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);, For 10-12 Cell NiMh/NiCd: You must choose a high voltage fan, and cut the output of the built-in BEC, then supply the receiver with an UBEC (An additional external DC-DC regulator);, , ,