HobbyKing
CLEVIS TOOL (6PCS/PACK)
,
Clevis Tool (6pcs/pack) Magnetized to hold retaining clips, Notched and ...5 Reviews
HobbyKing
STEERING ARMS (1/2 ARM) 10X 21MM (5PCS/SET)
,
Steering Arms (1/2 Arm/Fullarm) D12x4x H7x L215 Reviews
HobbyKing
DIY HEAT GUN 110V/60HZ
| Voltage | 110/60Hz |
Specifications:,
High temp heat gun. Great for shrink film or heat ...5 Reviews
HobbyKing
PROP SAVER W/ BAND 4MM (10PCS)
| Weight | 2.5g |
| Available | 4mm |
5 Reviews
HobbyKing
SPINNER 48DIAM / 4MM SHAFT
| Weight | 45g |
5 Reviews
HobbyKing
TURNIGY 5MM HEX SOCKET SCREWDRIVER
,
Turnigy 5mm Hex Socket Screwdriver Ultra strong steel tip, wont ...5 Reviews
HobbyKing
SPINNER 45DIAM / 4MM SHAFT
| Weight | 33g |
5 Reviews
HobbyKing
PROP & BACK-PLATE DRILL JIGS FOR DA100&150 \ DLE111 \ 3W50-170 \ TMM53-106
*Note*: It is best to drill propeller from the back face. Back out drill several times as you go to clear wood from the bit to ensure a smooth, accurate hole. Do not force the bit through the prop. Place bolt in first hole after drilling to help with alignment when drilling other holes. Please always orientate the prop with blade tips at 9 & 3 o'clock or horizontal to the ground with the compression stroke before drill. In case of dead stick landings this can save your prop and your airframe.,
Prop & Back-Plate Drill Jigs for DA100&150 \ DLE111 \ ...5 Reviews
HobbyKing
PROP ADAPTER W/ CONE M10X8MM SHAFT (GRUB SCREW TYPE)
,
Propeller adapter. To suit; 8mm Motor Shaft. 10mm Propeller Shaft. ...5 Reviews
HobbyKing
CARBON FIBER SPINNER 115MM / 4.5IN DIAMETER
,
Light weight real 3K carbon fiber. Includes Carbon Fiber backplate. ...5 Reviews
HobbyKing
FULL DIRECTION ELEVATOR ARMS 70X28X12MM
| Dimentions | 70x28x12mm |
5 Reviews
HobbyKing
PROP SAVER W/ BAND 3MM (10PCS)
| Weight | 2.5g |
| Available | 3mm |
5 Reviews