HobbyKing
TURNIGY MICRO QUAD V3 PNP ARF INCLUDES KK2.1 LCD FLIGHT CONTROL BOARD
Width:, Height:, Motor:, ESC:, Props:, Control Board:, Battery Connection:,
This tiny yet brilliantly designed V3 PNP micro quad makes ...HobbyKing
TURNIGY PLUSH 6A /.8BEC/6G SPEED CONTROLLER
| Model | Plush 6A |
| BEC | Linear |
| BEC Output | 5v/.8A |
| Lipo Count | 2cell Guarenteed (3 cell capable but not warranted) |
| NiMH | 5-6 |
| Programability | Programming card or Radio Controller |
| Size | 24x12x6mm |
Continuous Current: 6A, Burst: 8A, Weight: 6g,
Plush 6amp Brushless Speed Controller A tight package, with plenty ...5 Reviews
HobbyKing
NX-4008-620KV BRUSHLESS QUADCOPTER MOTOR
| Turns | 16T |
| Resistance | 0.129Rm |
| Idle Current | 0.8A |
| Can size | 45mm |
| Can Length | 14mm |
| Suggested ESC | 30A |
| Rated Watts | 180W |
| Weight | 79g |
| Cell count | 3~4S Lipoly |
Kv:620rpm/v, Shaft:, 3mm (Includes Prop saver mount for GWS style props),
If youre serious about your quad-copters performance, then look no ...5 Reviews
HobbyKing
FATSHARK FPV 5 PIN MOLEX TO A/V PLUGS CONNECTION CABLE
,
Fatshark FPV 5 Pin Molex to A/V Plugs Connection Cable5 Reviews
HobbyKing
HOBBYKING X525 V3 GLASS FIBER MAIN FRAME BOTTOM PLATE (1PCS/BAG)
,
Hobbyking X525 V3 Glass Fiber Main Frame Bottom Plate (1pcs/bag)5 Reviews
HobbyKing
TURNIGY TALON TRICOPTER (V1.0) CARBON FIBER FRAME
| Weight | 350g |
| Front Booms | 250mm |
| Rear Boom | 265mm |
| Motor Bolt Holes | 16/19/25mm |
Specs:, Boom Length (from boom base to motor shaft center):, Requires:, 28-XX or 35-XX brushless outrunner motor x 3,
The Turnigy Talon Tricopter is a high quality multi-rotor frame ...5 Reviews
HobbyKing
HOBBYKING SK450 GLASS FIBER QUADCOPTER FRAME 450MM
| Width | 450mm |
| Height | 80mm |
| Weight | 300g |
Features:, Built from top quality glass fiber and polyamide nylon., Specs:, Required:, 4 x 28mm 1000~1200kv (or similar size/kv),
The Hobbyking SK450 is a brilliantly designed 450mm quad frame ...5 Reviews
HobbyKing
TURNIGY TALON HEXCOPTER (V1.0) CARBON FIBER FRAME - 625MM
| Width | 625mm |
| Motor Bolt Holes | 16/19/25mm |
Specs:, Weight:, 440g (w/out electronics), Requires:, 28-XX or 35-XX brushless outrunner motor x 6,
The Turnigy Talon V1.0 Hexcopter frame is crafted from high ...5 Reviews
HobbyKing
TURNIGY H.A.L. OPTIONAL LANDING SKID SET
,
This is the optional landing skid set for the Turnigy ...5 Reviews
HobbyKing
HOBBYKING X666 GLASS FIBER MAIN FRAME BOTTOM PLATE (1PC/BAG)
,
Hobbyking X666 Glass Fiber Main Frame Bottom Plate (1pc/bag)HobbyKing
BUMBLEBEE - LANDING GEAR FIXED BLOCK (4PCS/BAG)
,
Bumblebee - Landing Gear Fixed Block (4pcs/bag)HobbyKing
BUMBLEBEE - LANDING GEAR-CROSS TUBE BUCKLE (4PCS/BAG)
,
Bumblebee - Landing Gear-Cross Tube Buckle (4pcs/bag)HobbyKing
F330 GLASS FIBER MINI QUADCOPTER FRAME 330MM
| Width | 330mm |
| Height | 48mm |
| Motor Mount Bolt Holes | 16/19mm |
Features:, • Built from quality glass fiber and polyamide nylon, Specs:, Weight:, 147g (w/out electronics), Required:, 4 x 28mm 1000~1200kv (or similar size/kv),
The F330 is a well thought out 330mm quad frame ...5 Reviews
HobbyKing
DEAD CAT CONVERSION KIT FOR SK450 QUADCOPTER FRAME
| Front arm width | 490mm |
| Rear arm width | 375mm |
| Weight | 460g |
*Note:, This is a conversion kit only and requires the use of original SK450 frame parts to complete., Specs:, Includes:, Lower main frame plate,
Are you looking to convert your SK450 quadcopter into a ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 28-26A 1200KV / 250W (SHORT SHAFT VERSION)
| Max current | 18A |
| Shaft | 3mm |
| Weight | 57.6g |
| ESC | 20A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 28-26A 1200kv (short shaft version), Kv:1200rpm/v, Max Power:, 200W @ 12v (3S) / 250W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 7x6E - 11.1v - 90W - 8A,
This is a short shaft version of our popular NTM ...5 Reviews