HobbyKing
TURNIGY 1370A SERVO 3.7G/0.4KG/.10SEC
| Model | TGY-1370A |
| Speed | 0.10sec |
| Torque | 0.4kg/cm |
| Weight | 3.7g |
| Size | 20x17.6x8.0mm |
Voltage:6v,
Micro analog servo. Precise, jitter free response for small parkflyers ...5 Reviews
HobbyKing
VSD-2 DIGITAL SERVO 39G/3.5KG/.18SEC
| Operating Voltage | 4.8v ~6v |
| Speed | .18sec/60deg @ 4.8v |
| Output Torque | 3.5kgf.cm(49.0 oz.in) at 4.8v |
| weight | 39.2g (1.37oz) |
| Size | 40.6x20.0x38.9mm (1.6x.79x1.14) |
5 Reviews
HobbyKing
HOBBY KING 4.3G / .5KG / .10SEC MICRO SERVO
| Size | 19x8x26mm |
| Voltage | 3~6v |
| Torque | 11.1oz / .5kg @ 6v |
| Speed | .12 s/60deg @ 6v |
| Weight | 4.3g |
5 Reviews
HobbyKing
DIGITAL METAL GEAR SERVO 16G/4.6KG/.16SEC
| Model | HD-2213MG |
| Voltage | 4.5v~6v |
| Speed | 0.16sec @ 6.0v |
| Torque | 4.6kg.cm @ 6.0v |
| Bearings | 1BB |
| Gears | Metal |
| Weight | 15.8g |
| Size | 22.8x12x29.4mm |
5 Reviews
HobbyKing
HEXTRONIK MG-14 14G/2.2KG/0.11SEC AIRCRAFT SERVO
| Weight | 14g |
| Dimension | 23*12.2*29mm |
| Operating voltage | 4.8-6.0V |
| Dead band width | 10us |
Stall torque:, 2.2kg/cm(4.8V )2.5kg/cm(6V), Operating speed:, 0.11sec/60degree(4.8v), 0.10sec/60degree(6v),
Hextronik MG-14 Metal gear servo MG-145 Reviews
HobbyKing
TOWERPRO MG946R 12KG 55G / 12KG / .20SEC
: JR (Fits JR and Futaba),
Higher torque version of the MG995. Good for slow trainers, ...5 Reviews
HobbyKing
BMS-706 LOW PROFILE HIGH SPEED SERVO 4.6KG / .13SEC / 26G
| Weight | 26g / 0.92oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 4.6kg/cm , 65 oz/in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
5 Reviews
HobbyKing
HXT 9612 LOW PROFILE METAL GEAR 32G / 5.4KG / .11SEC
| Weight | 32g |
| Dimensions | 42 x 21.5 x 22mm |
| Torque | 5.4kg-cm |
| Speed | .11sec/60deg @ no load |
| Running Current | 610mA |
| Stall current | 1200mA |
| Bearing | Yes Dual / M9x7 |
| Gear Type | Alloy / Steel |
5 Reviews
HobbyKing
TURNIGY S3317S SERVO 17G / 2.3KG / .14SEC
| Weight | 17g |
: 42 x 28 x 15mm, : 2.3kg-cm, : .14sec, : Mixed,
Turnigy S3317S Servo 17g / 2.3kg / .14sec Dimensions Torque ...5 Reviews
HobbyKing
GWS SERVO TESTER MT-1 W/ MANUAL-AUTO SELECT
| Size | 170x100x25mm |
| Input | 4.8 ~ 6V |
| Pulse width adjust | Manual/Auto |
5 Reviews
HobbyKing
BMS-371 MICRO SERVO 1.5KG / .12SEC / 8.4G
| Weight | 8.4 grams / 0.30oz |
| Dimensions | 24 x 11 x 24 mm / 0.96 x 0.43 x 0.99 inch |
| Torque At 4.8V | 1.5kg/cm , 21 oz/in |
| Speed At 4.8V | 0.12sec / 60 deg at no load |
5 Reviews
HobbyKing
HKS-9257 HIGH SPEED SERVO 4.5KG/ 25G/ 0.07SEC
| Dead band | 0.002ms (Default) |
| Control System | +Pulse Width Control |
| Working frequence | 1520μs / 80hz Digital mode/Analogy mode |
| (RX) Required Pulse | 3.0~5.0 Volt Peak to Peak Square Wave |
| Operating Voltage | 4.8~6.0 Volts DC |
| Operating Temperature Range | -10 to + 60 Degree C |
| Operating Speed (4.8V) | 0.08 sec/60° degrees at no load |
| Operating Speed (6.0V) | 0.07 sec/60° degrees at no load |
| Stall Torque (4.8V) | 3.8 kg.cm |
| Stall Torque (6.0V) | 4.2 kg.cm |
| Motor Type | Coreless Motor |
| Potentiometer Drive | Indirect Drive |
| Driver Type | FET |
| Bearing Type | Dual Ball Bearings |
| Gear Type | Plastic gear |
| Programmable | YES |
| Connector Wire Length | 18.0 |
| Dimensions | 36x15.3x21.8 mm |
| Weight | 25 g |
360° Modifiable: NO,
HKS-9257 is a high speed, high torque digital servo, Suitable ...5 Reviews
HobbyKing
BMS-706MG LOW PROFILE HIGH SPEED SERVO (METAL GEAR) 4.6KG / .13SEC / 32G
| Weight | 32g / 1.12oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 4.6kg/cm , 65 oz/in |
| Torque At 6.0V | 5.4kg/cm , 73oz/in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
| Speed At 6.0V | 0.11 sec / 60° at no load |
5 Reviews
HobbyKing
TURNIGY S3317B SERVO 19G / 2.5KG / .14SEC
| Weight | 19g |
: 42 x 28 x 15mm, : 2.5kg, : .14sec, : Mixed,
Turnigy S3317B Servo 19g / 2.5kg / .14sec Dimensions Torque ...5 Reviews