HobbyKing
BMS-20804 METAL GEARS FOR BMS-811DMG+HS & BMS-821DMG+HS
,
BMS-20804 Metal Gears for BMS-811DMG+HS & BMS-821DMG+HSHobbyKing
GEAR SET FOR HOBBYKING MI 47XX SERVOS
,
Replacement Ti-alloy Gear Set, suits the following servos. HK47003DMG HK47111DMG ...5 Reviews
HobbyKing
GWS S03N2 D HP2BB 30G/0.10SEC/6.6KG DIGITAL SERVO
| Lead | 30cm |
: 39g, : 0.12sec/60Deg @ 4.8v / 0.10sec/60Deg @ 6v, : 5.6kg.cm @ 4.9v / 6.6kg.com @ 6v, : 4.8~6v, Plug:JR,
GWS S03N2 D HP2BB 30g/0.10Sec/6.6kg Digital Servo Weight Speed Stall ...5 Reviews
RCTimer
55G 9KG METAL GEARED STANDARD SERVO RC211
| * Weight | A55g |
| *Size | 41.0 x 20.1 x 38.0mm |
| *Operating Speed | 0.16sec/60o |
| *Stall Torque | 9 kg/cm |
| *Operating Voltage | 5-7.2 Volts |
| Application | Great for gas or electric .20-1.20 size airplanes, |
RCTimer
2 SET TOWERPRO MG995 METAL GEAR TORQUE DIGI HIGH SPEED SERVO
| Expire date | To 31/Dec |
| -Dimensions | 1.57" x 0.79" x 1.44" (40 x 20 x 36.5mm) |
| -Weight | 1.78oz / 48g (Servo Net Weight Only) Operating Speed (4.8V no load) |
| -Operating Speed (6.0V no load) | 0.13sec / 60 degrees |
| -Stall Torque (4.8V) | (13kg/cm) (180oz/in.) |
| -Stall Torque (6.0V) | (15kg/cm) (208oz/in.) |
| -Temperature Range | -30 to +60 Degree C |
| -Dead Band Width | 4usec |
| -Operation Voltage | 3.5 - 8.4Volts |
RCTimer
RCTIMER TS-9018MG METAL GEAR SERVO 2.5KG/13G/0.10
Test Voltage:, , Weight:, 11g without splined horn,
TS-9018MG Control System Positive PWM control 1500 usec Neutral Operation ...HobbyKing
CORONA CS238MG METAL GEAR SERVO 4.6KG/ 22G/ 0.14SEC
| Model | CS238MG |
| Operating Voltage | 4.8V / 6.0V |
| Operating Current | 300mA / 400mA |
| Stall Torque | 4kg.cm / 4.6kg.cm |
| Size | 29X13X30mm |
| Weight | 22g |
| Dead Band | ≤5uSec |
| Ball bearing | MR106 |
| Gear | Metal |
| Connector wire | 215mm |
| Operating Temperature Range | -20c+60c |
Operating Speed:, 0.15sec.60º/ 0.14sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 3 slider/Direct Drive,
Corona CS238MG Metal Gear Servo 4.6kg/ 22g/ 0.14sec5 Reviews
HobbyKing
TURNIGY 1256TG DIGITAL TITANIUM GEAR SERVO 57G/8.5KG/.08SEC
| Model | TGY-1256TG |
| Operating Voltage | 4.8V / 6.0V |
| Operating Current | 300mA / 400mA |
| Stall Torque | 7.0kg.cm /8.5kg.cm |
| Size | 40.1X20.1X37.3mm |
| Weight | 57g |
| Dead Band | ≤2uSec |
| Motor | Coreless Type |
| Ball bearing | 2BB |
| Gear | Titanium |
| Connector wire | 300mm |
| Plug | JR Type |
| Operating Temperature Range | -20c+60c |
Operating Speed:, 0.09sec.60º/ 0.08sec.60º,
5 Reviews
HobbyKing
HOBBYKING S4020D CORELESS DIGITAL TITANIUM GEAR SERVO (HV) 56G / 0.13S / 21.8KG
| Weight | 56g |
| Operating Voltage | 6v~7.2v |
| Motor Type | Coreless |
| Middle Case | Aluminium Heat Sink |
| Lead/Plug | JR Type |
Specifications:, Direction:, Clockwise/pulse travelling 1000~2000us, Dimensions:, 40.2 x 20.1 x 38.8mm, Torque:, 18.5kg/cm @ 6v, 21.8kg/cm @ 7.2v, Speed (sec/60 deg):, 0.15 @ 6v, 0.13 @ 7.2v,
Hobbyking S4016D Coreless Digital Titanium Gear Servo, high voltage 6v~7.2v ...5 Reviews
HobbyKing
TURNIGY TGY-A55H ALLOY CASE DIGITAL SLIM WING SERVO (METAL GEAR) 8.6KG / .12SEC / 28G
| Features | Full Metal gear |
| Weight | 28.4g +/- 1g |
| Torque At 4.8V | 7.0kg/cm |
| Torque At 6.0V | 8.6kg/cm |
Specs:, Dimensions:, 30.00 x 10.00 x 34.50mm, Speed At 4.8V:, 0.15 sec / 60° at no load, Speed At 6.0V:, 0.12 sec / 60° at no load,
Turnigy TGY-A55H designed for F3A low profile performance, better precision ...5 Reviews
HobbyKing
CORONA DS238HV DIGITAL METAL GEAR SERVO 4.6KG/ 22G/ 0.13 SEC
| Model | DS238HV |
| Operating Voltage | 6.0V / 7.4V |
| Operating Current | 300mA / 400mA |
| Stall Torque | 4kg.cm / 4.6kg.cm |
| Size | 29X13X30mm |
| Weight | 22g |
| Dead Band | ≤3uSec |
| Ball bearing | MR106 |
| Gear | Metal |
| Connector wire | 300mm |
| Operating Temperature Range | -20c+60c |
Operating Speed:, 0.14sec.60º/ 0.13sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 3 slider/Direct Drive,
Corona DS238HV Digital Metal Gear Servo 4.6kg/ 22g/ 0.13sec5 Reviews
Hobby-Lobby
HEAVY DUTY METAL SERVO HORN 1"
,
1" Heavy Duty Metal Servo Horn Strong 1" heavy duty ...Hobby-Lobby
WING MOUNT CAN FOR MICRO SERVOS, 2
,
Wing Mount "Can" for Micro Servos, 2 Clean installation for ...Hobby-Lobby
SERVO SAVER, MIDSIZE W/ HOLE 23,24,25 SPLINE DRIVE
,
Servo Saver, Midsize w/ Hole 23,24,25 Spline Drive Servo Saver, ...