Hobby-Lobby
A6030 STANDARD DIGITAL AIRCRAFT SERVO HIGH TORQUE
Technical Specifications:, Length:, 1.60", Width:, .80", Height:, 1.50", Torque 4.8 / 6V:, 278 oz./in., Speed 4.8 / 6V:, .15 sec., Weight:, 1.8 oz.,
Digital servo for Spektrum systems Spektrum's new digital servos are ...Hobby-Lobby
HS-635HB/HS-6635HB KARBONITE GEAR SET
,
Karbonite Gear Set for HS-635HB/HS-6635HB Servos Replacement Karbonite gear set ...Hobby-Lobby
HS-5055MG DIGITAL METAL GEAR SUB MICRO SERVO
Technical Specifications:, Length:, .89", Width:, .45", Height:, .94", Torque 4.8 / 6V:, 14 / 17 oz./in., Speed 4.8 / 6V:, .12 / .10 sec., Weight:, .33 oz.,
Digital programable sub-micro servo with metal gears 0.89" x 0.45" ...Hobby-Lobby
JR DS8711 ULTRA TORQUE DIGITAL SERVO
| Size Category | Standard |
| Type | Digital |
| Application | Ultra torque |
| Weight | 2.36 oz |
| Bushing Or Bearing | Bearing |
| Gear Type | Metal |
| Gear Material | Metal Alloy |
JR DS8711 Digital Servo Features:, Anodized aluminum heat sink, Specs:, Torque:, 347 oz/in @ 4.8V, 403 oz/in @ 6V, Speed:, .19 sec/60° @ 4.8V,.15 sec/60° @ 6V, Dimensions (WxLxH):, .82 x 1.58 x 1.56 in,
Aluminum heat sink section for optimum reliability The unmatched power ...Hobby-Lobby
METAL GEAR SERVO HORN SCREW SET
,
Screw Set for Metal Gear Servo Horns Replacement screw set ...Hobby-Lobby
HS-5485HB DIGITAL SERVO
| Applications | Heli's and Aircraft up to 72" or up to 12lbs when using just one servo per control surface. |
| Warning | Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail. |
| *** Warning | Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail. |
| Size Category | Standard |
| Type | Digital |
| Weight | 1.59 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Single |
| Motor Type | 3-Pole |
| Gear Type | Metal |
| Gear Material | Karbonite |
Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Hitec HS-5485HB Digital Servo Highlights:, Programmable Digital Circuit, Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Technical Specifications:, Hitec HS-5485HB Digital Servo Specs:, Torque:, 72 oz/in @ 4.8V, 89 oz/in 6V, Speed:, .20 sec/60 deg @ 4.8V, 0.17 sec/60 deg @ 6V,
HS-5485HB Digital Servo The HS-5455HB is an excellent choice for ...Hobby-Lobby
BALL BEARING STD SERVO HS-325HB
Technical Specifications:, Length:, 1.57", Width:, .78", Height:, 1.43", Torque 4.8 / 6V:, 42 / 51 oz./in., Speed 4.8 / 6V:, .19 / .15 sec., Weight:, 1.5 oz.,
Hitec HS-325 Standard Servos - use with any brand radios ...Hobby-Lobby
DS8911HV ULTRA TORQUE SERVO
| Size Category | Standard |
| Type | Digital |
| Length | 1.58 in |
| Width | 0.82 in |
| Height | 1.56 in |
| Weight | 2.5 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Coreless |
| Gear Type | Metal |
| Gear Material | SuperSteel™ |
| Deadband | Less than .001ms |
| Size Category | Standard |
| Type | Digital |
| Length | 1.58 in |
| Width | 0.82 in |
| Height | 1.56 in |
| Weight | 2.5 oz |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Coreless |
| Gear Type | Metal |
| Gear Material | SuperSteel™ |
| Deadband | Less than .001ms |
Application:, Giant-Scale aircraft, Torque:, 470 oz-in (2S Li-Po), Speed:, .12 sec/60 degrees (2S Li-Po battery), Connector Type:JR, Voltage:, 7.4V (2S Li-Po battery), Technical Specifications:, DS8911HV Ultra Torque Servo Specs, Application:, Giant-Scale aircraft, Torque:, 470 oz-in (2S Li-Po), Speed:, .12 sec/60 degrees (2S Li-Po battery), Connector Type:JR, Voltage:, 7.4V (2S Li-Po battery),
JR's DS8911HV High Voltage Ultra Torque Servo The 8911HV servo ...Hobby-Lobby
S6000 DIGITAL SURFACE SERVO - SPORT
| Type | Digital |
| Application | 1/10-scale vehicles |
| Length | 1.6 in (41mm) |
| Width | 0.8 in (20mm) |
| Height | 1.5 in (39mm) |
| Weight | 1.5 oz (42.0 g) |
| Bushing Or Bearing | Bearing |
| Bearing | Dual |
| Motor Type | Brushed |
| Connector Type | Z-connector |
| Gear Type | Nylon |
S6000 Digital Surface Servo - Sport Highlights:, 90 oz-in of torque, Technical Specifications:, S6000 Digital Surface Servo - Sport Specs:, Torque:, 90 oz-in (6.48kg-cm) @ 6V, Speed:, 0.14 sec/60 degrees @ 6V, Voltage:, 4.8 or 6.0V (4 or 5 cell),
S6000 Digital Surface Servo - Sport The S6000 provides impressive ...Hobby-Lobby
A5030 MINI DIGITAL AIRCRAFT SERVO
| Type | Digital |
| Length | 1.3 inch (32.8mm) |
| Width | .58 inch (14.7mm) |
| Height | 1.1 inch (27.4mm) |
| Weight | 0.7 oz (21.6g) |
| Bushing Or Bearing | Bearing |
| Motor Type | Coreless |
| Bearing | Dual |
| Gear Type | Nylon |
| Voltage | 4.8 - 6V |
A5030 Mini Digital Aircraft Servo Specs:, Application:, 25 - 32 size airplanes, Torque:, 50 oz-in (3.6 kg-cm) @ 4.8V, 66 oz-in (4.8 kg-cm) @ 6V, Speed:, 0.12 sec/60 degrees @ 4.8V, 0.10 sec/60 degrees @ 6V,
Lightweight and high-speed performance The A5030's lightweight plastic gear train, ...Hobby-Lobby
H3020 SUB-MICRO DIGITAL HI SPEED HELI MG SERVO
| Type | Digital |
| Application | 250-450 size helis |
| Bushing Or Bearing | Single Bearing |
| Motor Type | Coreless |
| Connector Type | Z-connector |
| Gear Type | Metal |
Technical Specifications:, H3020 Sub-Micro Digital Hi Speed Heli MG Servo Specs:, Torque:, 18 oz-in (1.3 kg-cm) @ 4.8V / 22 oz-in (1.6 kg-cm) @ 6V, Speed:, .09 sec/60 degrees @ 4.8 /.08 sec/60 degrees @ 6V, Dimensions:, .93 in. x.45 in. x 1 in. (23.6 x 11.5 x 25.5mm), Voltage:, 4.8 or 6.0V (4 or 5 cell),
Perfect combination for 250- to 450-size helis This 0.08-second transit ...Hobby-Lobby
DIGITAL ULTRA NANO
| Motor Type | 3 Pole |
| Bearing Type | None |
| Speed (4.8V/6.0V) | 0.10 / NA |
| Torque oz./in. (4.8V/6.0V) | 11 / NA |
| Torque kg./cm. (4.8V/6.0V) | 0.8 / NA |
| Size in Inches | 0.73 X 0.30 X 0.61 |
| Size in Millimeters | 18.6 x 7.6 x 15.5 |
| Weight ounces | 0.16 |
| Weight grams | 4.5 |
| Motor Type | 3 Pole |
| Bearing Type | None |
| Speed (4.8V/6.0V) | 0.10 / NA |
| Torque oz./in. (4.8V/6.0V) | 11 / NA |
| Torque kg./cm. (4.8V/6.0V) | 0.8 / NA |
| Size in Inches | 0.73 X 0.30 X 0.61 |
| Size in Millimeters | 18.6 x 7.6 x 15.5 |
| Weight ounces | 0.16 |
| Weight grams | 4.5 |
Technical Specifications:, Digital Ultra Nano Servo,
Digital Ultra Nano Great things do come in small packages. ...Hobby-Lobby
A5040 MINI DIGITAL AIRCRAFT METAL GEAR SERVO
| Type | Digital |
| Length | 1.3 inch (32.8mm) |
| Width | .58 inch (14.7mm) |
| Height | 1.1 inch (27.4mm) |
| Weight | 0.7 oz (21.6g) |
| Bushing Or Bearing | Bearing |
| Motor Type | Coreless |
| Bearing | Dual |
| Gear Type | Metal |
| Voltage | 4.8 - 6V |
A5040 Mini Digital Aircraft Metal Gear Servo Specs:, Application:, 25 - 32 size airplanes, Torque:, 50 oz-in (3.6 kg-cm) @ 4.8V, 66 oz-in (4.8 kg-cm) @ 6V, Speed:, 0.12 sec/60 degrees @ 4.8V, 0.10 sec/60 degrees @ 6V,
Lightweight and high-speed performance The A5040's extremely tough metal gear ...