HobbyKing
TITANIUM COLOR ALUMINUM HEAVY DUTY SERVO SAVER
,
Titanium Color Aluminum Heavy Duty Servo Saver with inserts for ...5 Reviews
RCTimer
RCTIMER D9025MG DIGITAL METAL GEAR SERVO 2.5KG / 13G / 0.09SEC
Test Voltage:, , Weight:, 13g without splined horn,
TS-D9025MG Control System Positive PWM control 1500 usec Neutral Operation ...RCTimer
METAL GEAR DIGITAL SERVO D9018MG
Test Voltage:, , Weight:, 11g without splined horn,
TS-D9018MG Control System Positive PWM control 1500 usec Neutral Operation ...HobbyKing
CORONA DS-239HV DIGITAL SLIM WING SERVO (METAL GEAR) 4.6KG / .13SEC / 22G
| Model | DS-239HV |
| Operating Voltage | 6.0V/7.4V |
| Operating Current | 300mA / 400mA |
| Stall Torque | 4.0kg.cm / 4.6kg.cm |
| Size | 30X10X34.5mm |
| Weight | 22g |
| Dead Band | ≤3uSec |
| Ball bearing | MR85x2 |
| Gear | Metal |
| Connector wire | 215mm |
| Operating Temperature Range | -20c+60c |
Operating Speed:, 0.14sec.60º/ 0.13sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 3 slider/Direct Drive,
Corona DS-239HV Digital Slim Wing Servo (Metal Gear) 4.6kg / ...3 Reviews
HobbyKing
TGY-210DMH METAL GEAR CORELESS DIGITAL SERVO W/ HEAT SINK 3.9KG / .13SEC / 16G
| Weight | 16 grams |
| Dimensions | 23 x 12 x 25.4 mm |
| Torque @ 4.8V | 3.1 kg/cm |
| Torque @ 6.0V | 3.9 kg/cm |
| Motor | Coreless |
Specifications:, Speed @ 4.8V:, 0.15 sec / 60° at no load, Speed @ 6.0V:, 0.13 sec / 60° at no load, Gear:, Metal gear / Dual ball bearing,
5 Reviews
HobbyKing
HK15148B DIGITAL SERVO 19G / 2.8KG / 0.14S
| Weight | 19g |
| Voltage | 4.8v~6v |
| Gear type | Metal Gear |
Torque:, 2.5kg @ 4.8v, 2.8kg @ 6v, Speed:, 0.17 / 60deg @ 4.8v, 0.14 / 60 deg @ 6v, Plug:JR,
HK15148B Digital Servo 19g / 2.8kg / 0.14s Spec.5 Reviews
HobbyKing
HEAVY DUTY ALLOY 3.6IN PULL-PULL SERVO ARM - HITEC (RED)
| Center to Outer Hole | 1.80in |
Specifications:, Holes:M3, Lenght:,
Heavy Duty Alloy 3.6in Pull-Pull Servo Arm - Hitec (Red)5 Reviews
HobbyKing
HEAVY DUTY ALLOY 1.25IN SERVO ARM - HITEC (RED)
| Holes | #4-40 |
| Center to Hole 1 | 0.80in |
| Center to Hole 2 | 0.95in |
| Center to Hole 3 | 1.10in |
| Center to Hole 3 | 1.25in |
Specifications:, Lenght:,
Heavy Duty Alloy 1.25in Servo Arm - Hitec (Red)HobbyKing
HEAVY DUTY ALLOY 1IN SERVO ARM - JR (RED)
| Holes | #4-40 |
| Center to Hole 1 | 0.55in |
| Center to Hole 2 | 0.70in |
| Center to Hole 3 | 0.85in |
| Center to Hole 3 | 1.00in |
Specifications:, Lenght:,
Heavy Duty Alloy 1in Servo Arm - JR (Red)5 Reviews
HobbyKing
CORONA DS633BP DIGITAL MICRO 0.82KG/ 6.2G/ 0.12SEC
| Model | DS633BP |
| Operating Voltage | 4.8V / 6.0V |
| Stall Torque | .82kg.cm /.95kg.cm |
| Size | 23.5x9.5x19.5mm |
| Weight | 6.2g |
| Dead Band | ≤5uSec |
| Gear | Plastic |
| Connector wire | 215mm |
| Operating Temperature Range | -20c+60c |
Operating Speed:, 0.12sec.60º/ 0.10sec.60º,
Corona DS-633BP Digital Servo 0.82kg/ 6.2g/ 0.12sec Spec.5 Reviews
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 71g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
HEAVY DUTY ALLOY 3.0IN PULL-PULL SERVO ARM - FUTABA (RED)
| Center to Outer Hole | 1.50in |
Specifications:, Holes:M3, Lenght:,
Heavy Duty Alloy 3.0in Pull-Pull Servo Arm - Futaba (Red)HobbyKing
TURNIGY T541BBD HIGH TORQUE NANO DIGITAL SERVO 0.7KG / 4.7G / 0.09SEC
| Voltage | 4.8v-6.0V |
| Size | 19mm x19.5 mm x 8mm |
| Weight | 4.7 gram |
| Motor | coreless |
| Gear Train | Plastic |
| Ball Bearing | Yes |
| Type | Digital |
Spec:, Speed:, 0.09sec/60deg (4.8v); 0.08 sec/60deg (6.0v), Torque:, 0.7kg.cm (4.8v); 0.8kg.cm (6.0v),
This is a great little Turnigy High torque Nano Digital ...5 Reviews