HiModel
FRSKY 2.4G 8-CHANNEL FUTABA FASST COMPATIBLE TF RECEIVER W/RSSI & SB PORTSTFR8SB
| Model | TFR8SB (8ch FASST compatible receiver with RSSI & SB ports) |
| Weight | 11.5g |
| Dimension | 44.5x 27.5 x 17mm |
| Operating Voltage Range | 3.5V-10.0V |
| Servo Frame rate | 14ms (FS - normal speed mode) |
, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 8, 7ms (HS - high speed mode), , ,
Features: THIS IS THE FRSKY FASST 8-CH RECEIVER TFR8SB VERSION. ...HiModel
2.4G CORONA DSSS 14-CHANNEL RECEIVER CR14
| Type | CR14 DSSS |
| Size | 37.5X52.5X16MM |
| Weight | 21g |
| Range | >1500M |
| Sensitivity | -100dbm |
| Operating voltage | 4.8V-6V |
| Operating current | 40mA |
| Compatible with | CT14F |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specs:, Number of Channel: 14, , ,
Features: The new lightweight, advanced technology unit has the following ...1 Reviews
HiModel
2.4G MINI 6 CHANNELS RECEIVER W/LONG ANTENNA X8R6-L (BLACK HARD CASE)
| Size | 50 x 26 x 10mm (1.97 X 1.02 X 0.39 inch) |
| Weight | 8g / 0.28 oz |
| Antenna | 30cm(X8R6-L) |
, , , , , , Specifications:, , , , , , , , , , , X8R6-L is a mini 6 channels receiver., Compatible with all ASSAN's RF modules., , ,
Includes/Requires: Includes:1 x receiver 2.4G3 Reviews
HiModel
2.4G MINI 6 CHANNELS RECEIVER W/SHORT ANTENNA X8R6
| Size | 50 x 26 x 10mm (1.97 X 1.02 X 0.39 inch) |
| Weight | 8g / 0.28 oz |
| Antenna | 3cm(X8R6) |
, , , , , , Specifications:, , , , , , , , , , , X8R6 is a mini 6 channels receiver., Compatible with all ASSAN's RF modules., , ,
Includes/Requires: Includes:1 x receiver 2.4G4 Reviews
HiModel
ASSAN 2.4G X8D CONVERSION RF MODULE FOR NON-MODULE BASED PPM TRANSMITTERS
| Includes | 1 x RF module 2.4G |
Features:, , Includes/Requires:, ,
This module is designed to convert your conventional non-module based ...11 Reviews
HiModel
EXTEND ANTENNA FOR ASSAN X8 2.4G RF MODULE
| Includes | 1 x Extend Antenna |
Features:, , Includes/Requires:, ,
Extend Antenna For ASSAN X8 2.4G RF Module1 Reviews
HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR JR TRANSMITTER (RF CT8J, RX CR8D) V2
| Type | CT8J 2.4G DSSS |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your JR FM Transmitter ...2 Reviews
HiModel
CORONA 6-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER R6FA
| Type | R6FA |
| Operating voltage range | 4 - 10V |
| Operating current | 70mA @ FASST 7ch mode normal and 110mA max. |
| Latency | 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode |
| Sensitivity | about -96dBm |
, , , , , , Specifications:, , , , , , , , , , , 80mA @ FASST multi-channel mode normal and 110mA max., 8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode, channel number: 8, , ,
Features: Compatibility: CORONA 2.4G Spread Spectrum FASST compatible receiver is ...HiModel
2.4G CORONA 4-CHANNEL MINI DSSS RECEIVER FOR CT8F/CT8J RF MOULES CR4D
| Type | CR4D 4ch |
| Size | 30/36L (without pin/with pins) x 18W x 6H mm |
, , , , , , Specifications:, , , , , , , , , , , *Note: This receiver is only compatible with Corona V2 RF modules CT8F/CT8J, and is not compatible with the old Corona RF modules., , ,
Features: Light weight, mini size 2.4G receiver from Corona. *Note: ...HiModel
2.4G CORONA 4-CHANNEL MINI FHSS RECEIVER FOR CT8F/CT8J FHSS RF MOULES CR4F
, , , , , , Specifications:, , , , , , , , , , , Type:, , CR4F, , Si ze:, , 39.5X18.5X6.5mm(1.55"x0.72"x0.25"), , Weigth, , 3.9g, , Channel number, , 4, , Working voltage, , 4.8V-6V, , Working current, , 30mA, , Range, , >1000M/3250ft, , Trsmitting speed, , 128kpbs, , Resolution, , 10bit, , Delay, , 22ms, , Sensitivity, , -100dbm, , Compatibility, , CT8F/CT8J(FHSS), , *Note: This receiver is only compatible with Corona V2 RF modules CT8F/CT8J FHSS, and is not compatible with the old Corona RF modules or DSSS modules., , ,
Includes/Requires: Includes: 1 x 2.4G receiver CR4F FHSS1 Reviews
HiModel
CORONA 2.4GHZ DIY DSSS TRANSMITTING MODULE AND RECEIVER CT8Z/CR8D
| Type | CT8Z DSSS |
| Size | 38.5*21.8*6.5mm |
| Operating voltage | 8V-13V |
, , , , , , Specifications:, , , , , , , , , , , Weight: 5g, Operating current: , Output Power:, ,
Features: Features of Corona 2.4GHz DIY transmitting module and receiver ...3 Reviews
HiModel
GPS MODULE FOR TELEMETRY MODULE WK-CTL01-D
, , , , , , Specifications:, , , , , , , , , , , GPS Sensor for, Telemetry Module WK-CTL01-D, , ,
Includes/Requires: Includes: 1 x GPS module (WK-GPS) * No printed ...HiModel
RPM SENSOR FOR TELEMETRY MODULE WK-CTL01-D
, , , , , , Specifications:, , , , , , , , , , , RPM Sensor for, Telemetry Module WK-CTL01-D, , ,
Includes/Requires: Includes: 1 x RPM sensor (rate sensor) (WK-MP-RPM) * ...HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 410JST (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, ◆ 1.25Pitch JST servo connectors, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
MINIMA A-FHSS COMPATIBLE 2.4G 5-CH MICRO RECEIVER (HITEC COMPATIBLE)
| Weight | 2.3g |
| Dimension | 22 x 19 x 8mm |
, , , , , , Specifications:, , , , , , , , , , , MINIMA A-FHSS Compatible 2.4G 5-Ch Micro Receiver (Hitec compatible), Channel number: 5, *Due to the small size, this receiver has park fly range., *For most Hitec 2.4G transmitters, it is likely suport the ability to connect to Minima receivers, however for older units, if it doesn't, you may need to update the software to support it., , ,
Includes/Requires: Includes:1 x A-FHSS receiver