HiModel
FITEC 56G/ 16.9KG/ .12 SEC TITANIUM GEAR HV DIGITAL SERVO FS5617M
| Dimension | 40.2 x20.0 x38.6mm |
| Weight | 56g (1.46oz) |
| Speed | 0.14sec/60°(7.4V) |
| Torque | 14.8kg.cm/205.5 oz.in(7.4V) |
| Working voltage | 7.4-8.4V/ 2S Lipo |
| Dead band width（usec） | 2usec |
| Connector type | JR/Futaba compatible |
| Wire length | 30cm |
| Application | airplane, car, boat |
, , , , , , Specifications:, , , , , , , , , , , SPECIFICATION：, 0.12sec/60°(8.4V), 16.9kg.cm/234.7 oz.in(8.4V), , ,
Features: - Titanium gear - Dual ball bearings. - Coreless ...HiModel
FITEC 25G/ 2.2KG/ .07 SEC DIGITAL SERVO FS9257D (FOR 400-500 CLASS HELIS)
| Dimension | 35.0 x 15 x 29.2mm |
| Weight | 25g |
| Speed | 0.07sec/60° |
| Torque | 2.2kg.cm |
| Working voltage | 4.8-6V |
| Dead band width（usec） | 2usec |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , SPECIFICATION：, , ,
Features: Have the same dimension as Futaba S9257, suit for ...HiModel
16G/2.4KG/ .10SEC DIGITAL SERVO S1002D
| Speed | 0.12 sec/60° @ 4.8V; 0.10 sec/60° @ 6V |
| Torque | 2.0kg-cm @ 4.8V; 2.4kg-cm @ 6V |
| Weight | 16g / 0.42oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 22.8, B: 12.6, C: 24.8, D: -, E: -, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
9G DIGITAL BALL BEARING MICRO SERVO DS-928BB
| Type | DS-928BB |
, , , , , , Specifications:, , , , , , , , , , , Operating voltage range 4.8V~6.0V, Operating temperature range -20℃ to +60℃, Operating speed 0.12sec/60°, Stall torque 1.8kg.cm, Standing torque 1.8kg.cm hold out @ 5°, Running current 200mA/60° no load, FDead band width ≤3usec, Operating travel 40°/one side pulse traveling 400usec, Motor type cored metal brush, Potentiometer type 2 slider/direct drive, Dimensions 22.5x11.5x24.6mm(0.89x0.45x0.97)", Weight 9g(.32oz), Ball bearing MR85, Gear material heavy duty resin, Connector wire length 215mm(8.46in), , ,
Features: Fully compatible with Futaba GY401 gyro, good choice for ...1 Reviews
HiModel
SCANNER 6.7G/ 1.0KG/ .12 SEC SUB-MICRO SERVO METAL GEAR SSV-9103MG
| Item No | SSV-9103 |
| Weight | 6.7grams / 0.17oz. |
| Dimensions | 21 x 8.5 x 20 mm / 0.82 x 0.37 x 0.8 inch |
| Input Voltage | For 4.8V Only |
| Torque At 4.8V | 1.0kg/cm ,14 oz/in |
| Speed At 4.8V | 0.12sec / 60 deg at no load |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Made in TaiwanHiModel
XQ-POWER 17G/2.7KG/ .14SEC MICRO SERVO XQ-S1017S
| Speed | 0.16 sec/60° @ 4.8V; 0.14 sec/60° @ 6V |
| Torque | 2.7kg-cm @ 4.8V; 2.3kg-cm @ 6V |
| Weight | 17g / 0.44oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 28.5, B: 13.3, C: 30.6, D: 34.2, E: -, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
3.7G/ 0.3KG/ .10 SEC DIGITALMICRO SERVO S0820
| Type | S0820 |
| Weight | 3.7 grams |
| Torque | 0.6 (kg.cm) |
| Speed | 0.10 (sec/60°) |
| Voltage | 3.5V to 4.8 V |
| Dimension | 19.3 x 8.3 x 19.6 mm |
| Wire length | 15cm |
| Connector | Futaba/JR compatible |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x S0820 digital servo with servo hornsHiModel
4.3G MICRO SERVO
| ●Dimensions | 19.69 x 8.25 x 19.51mm |
| ●Weight | 4.3g / 0.15 oz |
| ●Operating Speed (4.8V no load) | 0.1sec/60 degrees |
| ●Stall Torque (4.8V) | 0.8 kg/cm |
| ●Temperature Range | -30 to +60 Degree C |
| ●Connector lead length | 15cm |
| ●Operating Voltage | 4.8-6.0 Volts |
, , , , , , Specifications:, , , , , , , , , , , (*Factory packing, without stickers or labels), , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
CORONA 9G/ 1.8KG/ .12 SEC MICRO SERVO CS-928BB
| Type | CS-928BB Analog |
| Size | 22.5X11.5X24.6mm(0.88"x0.45"x0.96") |
| Operating voltage | 4.8V~6.0V |
| Operating speed | 0.14sec/60º |
| Stall torque | 1.8kg.cm |
| Gear Material | Resin |
| Connector wire length | 215mm |
, , , , , , Specifications:, , , , , , , , , , , Weight: 9g, , ,
Includes/Requires: Includes: 1 x servo with servo hornsHiModel
PZ 2.2G/ 0.1KG/ .09 SEC ANALOG SUB-MICRO SERVO PZ-15318
| Type | PZ-15318 |
| Dimension | 16x8.2x16.5 mm /0.63x0.32x0.65 inch |
| Net Weight | 2.2g |
| Speed | 0.09s/60°@3.7v |
| Torque | 0.1kg-cm @3.7V |
| Motor | Coreless |
| Working voltage | 2.8 - 4.2V |
| Wire length | 10cm |
| Motor type | high speed, coreless |
| Connector type | Mini JST |
, , , , , , Specifications:, , , , , , , , , , , Precision Pom Gear, * Voltage input can NOT higher than 4.2V., , ,
Includes/Requires: Includes: 1 x servo with servo hornsHiModel
POWER HD 15.8G/ 3.9KG-CM TORQUE HALF METAL DIGITAL SERVO HD-2216MG
, , , , , , Specifications:, , , , , , , , , , , Item, , Gear, Type, , Type, , Dimension(mm), , Speed(sec/60°)@6.0 Voltage, , Torque(Kg-cm), @6.0 Voltage, , Weight, (g), , 1, , Metal, , HD-9150MG, , 40.7*20*42.4, , 0.18, , 16.0, , 61.0, , 2, , Metal, , HD-9110MG, , 40.7*20*39.4, , 0.19, , 10.5, , 49.0, , 3, , Half Metal, , HD-7150MG, , 40.7*20*39.4, , 0.14, , 7.20, , 49.0, , 4, , Plastic, , HD-5680BB, , 40.7*20*39.4, , 0.14, , 6.50, , 42.0, , 5, , Plastic, , HD-4180BB, , 40.7*20*37.0, , 0.17, , 4.10, , 41.0, , 6, , Half Metal, , HD-2213MG, , 22.8*12*29.4, , 0.16, , 4.60, , 15.8, , 7, , Half Metal, , HD-1810MG, , 22.8*12*29.4, , 0.13, , 3.90, , 15.8, , 8, , Half Metal, , HD-1581HB, , 22.8*12*25.4, , 0.16, , 2.60, , 12.3, , 9, , Half Metal, , HD-2216MG, , 22.8*12*29.4, , 0.13, , 3.90, , 15.8, , 10, , Half Metal, , HD-2216HB, , 22.8*12*25.4, , 0.09, , 1.60, , 13.6, , 11, , Metal, , HD-9660MG, , 40.3*20*37.2, , 0.16, , 20.0, , 52.4, , 12, , Plastic, , HD-3688HB, , 35.0*15*29.2, , 0.11, , 4.60, , 26.0, , , ,
Includes/Requires: Includes: 1 x digital servo with servo horns1 Reviews
HiModel
6G/1.1KG/ .11SEC MICRO SERVO S0006
| Speed | 0.12 sec/60° @ 4.8V; 0.11 sec/60° @ 6V |
| Torque | 1.0kg-cm @ 4.8V; 1.1kg-cm @ 6V |
| Weight | 6g / 0.16oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 18, B: 11.8, C: 21.5, D: 26.4, E: -, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
27G/3.3KG/ .10SEC MICRO SERVO S0270
| Speed | 0.12 sec/60° @ 4.8V; 0.10 sec/60° @ 6V |
| Torque | 3.3kg-cm @ 4.8V; 3.0kg-cm @ 6V |
| Weight | 27g / 0.70oz |
| Power Supply | 4.8V/ 6V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Dimension (mm): A: 31.2, B: 16.3, C: 31, D: 37.5, E: 7.5, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
POWERHD 5.5G/0.9KG/ .10SEC HIGH PERFORMANCE MICRO SERVO HD-1550A
| Speed | 0.10 sec/60° @ 6V |
| Torque | 0.9kg-cm @ 6V |
| Dimensions | 21 x 19.6 x 20.1 mm |
| Weight | 5.5g |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Power Supply: 6V, , ,
Features: The is the new Power HD high performance analog ...HiModel
POWERHD 8G/1.7KG-CM TORQUE HIGN PERFORMANCE MICRO SERVO HD-1800A
| Speed | 0.10 sec/60° @ 6V |
| Torque | 1.7kg-cm @ 6V |
| Dimensions | 22 x 11.7 x 24.3 mm |
, , , , , , Specifications:, , , , , , , , , , , Weight: 8g, Power Supply: 6V, , ,
Features: The is the new Power HD high performance analog ...