HiModel
12.5G/ 2.8KG/ .12 SEC DIGITAL HIGH VOLTAGE MICRO SERVO DS939HV
, , , , , , Specifications:, , , , , , , , , , , Type： DS939HV, Dimension： 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Weight： 12.5g, Working Voltage： 6.0V / 7.4V, Working Current： 200mA / 240mA, Speed： 0.13sec.60º/ 0.12sec.60º, Torque： 2.6kg.cm / 2.8kg.cm, Gear Material： Metal, Wire length： 215mm, , ,
Features: THIS IS THE HIGH VOLTAGE SERIES DIGITAL SERVOS FROM ...HiModel
KST 21G/ 3.0KG/ .06 SEC MICRO DIGITAL SERVO DS115MG
| Type | DS115MG |
| Torque | 3.0kg.cm @ 6V; 2.4kg.cm @4.8V |
| Speed | 0.06 (sec/60°) @6V; 0.07 sec/60°@ 4.8V |
| Voltage | DC 4.5V to 6.0V |
| Dimension | 23 x 12 x 27.25 mm |
| Weight | 21g/0.73 oz (with wire and connector) |
| Gear type | metal gear |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: - Digital servo, metal gear - All metal case ...1 Reviews
HiModel
PZ 1.7G/ 0.07KG/ .05 SEC DIGITAL SUB-MICRO SERVO PZ-15320
| Type | PZ-15320 |
| Dimensions | 0.55x0.24x0.70inch (14x6.2x17.9mm) |
| Weight | 0.06 oz (1.7g) |
| Speed | 0.05s/60° @ 2.5v 0.05s/60° @ 3.7v |
| Torque | 0.06kg/cm @2.5v 0.075kg/cm@3.7v |
| Operating Voltage | 2.8V-4.2V |
| Wire length | 10cm |
| Motor type | high speed, coreless |
| Connector type | Mini JST |
, , , , , , Specifications:, , , , , , , , , , , Excellent for micro aerobatic 3D flying, * Voltage input can NOT higher than 4.2V., , ,
Features: This is the PZ-15320 low voltage digital Servo The ...HiModel
PZ 25G/ 3.7KG/ .12 SEC DIGITAL MINI SERVO PZ-15128A
| Type | PZ-15128A |
| Torque | 3.3Kg/4.8V 3.7Kg/6V |
| Operating Speed | 0.15s/60°4.8V 0.12s/60°6V |
| Dimensions | 35.9x15.1x28.6mm |
| Weight | 25g |
| Working voltage | 4 - 6V |
| Wire length | 17cm (approx.) |
| Motor type | high speed, coreless |
| Connector type | JR (Futaba compatible) |
, , , , , , Specifications:, , , , , , , , , , , Precision Pom Gear, Ball bearing number: 2, , ,
Includes/Requires: Includes: 1 x servo with servo hornsHiModel
POWER HD 41G/ 4.1KG-CM TORQUE DIGITAL SERVO HD-4180BB
| Type | HD-4180BB |
| Weight | 41 grams |
| Torque | 4.1 (kg.cm, VCC=6V) |
| Speed | 0.17 (sec/60°) |
| Connector wire length | 300 ±5 mm |
| Voltage | DC 6V |
| Dimension | 40.7*20.37.0 mm |
| Type | HD-1581HBWeight |
, , , , , , Specifications:, , , , , , , , , , , Item, , Gear, Type, , Type, , Dimension(mm), , Speed(sec/60°)@6.0 Voltage, , Torque(Kg-cm), @6.0 Voltage, , Weight, (g), , 1, , Metal, , HD-9150MG, , 40.7*20*42.4, , 0.18, , 16.0, , 61.0, , 2, , Metal, , HD-9110MG, , 40.7*20*39.4, , 0.19, , 10.5, , 49.0, , 3, , Half Metal, , HD-7150MG, , 40.7*20*39.4, , 0.14, , 7.20, , 49.0, , 4, , Plastic, , HD-5680BB, , 40.7*20*39.4, , 0.14, , 6.50, , 42.0, , 5, , Plastic, , HD-4180BB, , 40.7*20*37.0, , 0.17, , 4.10, , 41.0, , 6, , Half Metal, , HD-2213MG, , 22.8*12*29.4, , 0.16, , 4.60, , 15.8, , 7, , Half Metal, , HD-1810MG, , 22.8*12*29.4, , 0.13, , 3.90, , 15.8, , 8, , Half Metal, , HD-1581HB, , 22.8*12*25.4, , 0.16, , 2.60, , 12.3, , 9, , Half Metal, , HD-2216MG, , 22.8*12*29.4, , 0.13, , 3.90, , 15.8, , 10, , Half Metal, , HD-2216HB, , 22.8*12*25.4, , 0.09, , 1.60, , 13.6, , 11, , Metal, , HD-9660MG, , 40.3*20*37.2, , 0.16, , 20.0, , 52.4, , 12, , Plastic, , HD-3688HB, , 35.0*15*29.2, , 0.11, , 4.60, , 26.0, , , ,
Includes/Requires: Includes: 1 x digital servo with servo hornsHiModel
WFLY 40MHZ RF MODULE TYPE WFTRF01-FM
| 1. Frequency | 40MHz |
| 2. Output Power | ≤700MW |
| 3. Current | ≤150MA |
| 4. Frequency Stability | ±8PPM |
| 5. Size | 58.4x37x20.6 mm |
| 6. Weight | 32g / 1.1 oz |
, , , , , , Specifications:, , , , , , , , , , , WFLY 40MHz RF MODULE Type WFTRF01-FM, Be compatible with FUTABA, , ,
HiModel
ANTENNA FOR WFLY 6-CHANNEL TRANSMITTER
| Includes | 1 x antenna |
Features:, , Includes/Requires:, ,
This is the genuine replacement antenna for WFLY 6-channel transmitters.HiModel
BLUE ARROW 3.6G MICRO-SERVO GEAR SET
, , , , , , Specifications:, , , , , , , , , , , Genuine full set of gears for Blue Arrow Micro 3.6g Servos., , ,
HiModel
SERVO HORN SET FOR TOWERPRO SG5010
, , , , , , Specifications:, , , , , , , , , , , Servo horns & screw set for Towerpro SG5010 servos., , ,
Includes/Requires: Includes:1 x single arm 1 x double arm 4 ...HiModel
SERVO HORN SET FOR TOWERPRO SG50
, , , , , , Specifications:, , , , , , , , , , , Servo horns & screw set for Towerpro SG50 servos., , ,
Includes/Requires: Includes:1 x single arm 1 x double arm 1 ...HiModel
HITEC 117G / 14.4 KG / .23 SEC METAL GEAR GIANT SCALE SERVO HS-755MG
| Motor Type | 3 Pole |
| Bearing Type | Dual Ball Bearing |
| Speed | 0.28 / 0.23 sec @ 60 deg. |
| Torque | 166.64 / 199.97 oz.in (4.8v/6v) 12.0 / 14.4 kg.cm |
| Size | 2.33" x 1.14" x 1.96" 59.00 x 29.00 x 50.00mm |
| Weight | 4.12oz 117.00g |
, , , , , , Specifications:, , , , , , , , , , , English Metric, , ,
Features: Hitec’s expansive line-up of servos include the HS-755HB and ...HiModel
TOWER PRO 11KG TORQUE HEAVY DUTY METAL GEARS SERVO MG996R
| Size | 40.7x19.7x42.9mm |
| Weight | 55g |
| Operating speed | 0.17sec/60degree(4.8v) 0.14sec/60degree(6v) |
| Stall torque | 9.4kg/cm(4.8V), 11kg/cm(6V) |
| Temperature Range | 0 degree to 55 degree |
| Dead band width | 5μs |
| Operating Voltage | 4.8-7.2V |
| Gear type | metal |
| Application | Gasoline engine plane,train-flyer |
| Wire length | 31cm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x servo including screws etc 2 x ...HiModel
JR STANDARD 23T ALUMINUM SINGLE SIDE ARM - BLACK
| Overall length | 35.4mm |
| Mounting holes spacing | at 8.5, 20, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , JR Standard 23T Aluminum Single Side Arm - Black, * Fits the JR, KO, Sanwa servos with splined output shafts., , ,
Features: Suit for JR, KO, Sanwa servos. There are two ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM SO006 - ORANGE
| Overall length | 35.5mm |
| Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm SO006 - Orange, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM - BLACK
| Overall length | 35.5mm |
| Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm - Black, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...