HiModel
KDS MODEL 2.4G FUTABA COMPATIBLE RF MODULE & RECEIVERS COMBO KDS-8XTF
Features:, , Includes/Requires:, , Includes:, 1 x RF module, Futaba compatible,
● Fully intelligent design, plug and play. ● No need ...8 Reviews
HiModel
WFLY 2.4G 7-CHANNEL RECEIVER WFR07S
| Receiver Model | WFR07S |
| Range test in ground | more than 800M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR07S) 7 channel 2.4GHz Receiver, Use in： airplane, helicopter, glider, car, boat, Band： 2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity： -97dBm, Fail safe , quick recover signal, Modulation： PPM/PCMS 1024/PCMS 4096, Power： 4.8-6V, Dimension： 40.42×27.27×11.88mm, Weight： 9.6g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
WFLY 2.4G 4-CHANNEL MINI RECEIVER WFR04S
| Receiver Model | WFR04S |
| Range test in ground | more than 600M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR04S) 4 channel 2.4GHz Receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Fail safe , quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：24×14mm, Net Weight：2.2g (Gross Weight：2.8g), , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
EZC-RC 4-CHANNLE WIFI RECEIVER (CONTROL YOUR MODEL WITH IPHONE, IPAD, ITOUCH & ANDRIOD)
| Type | RD921 full-range receiver |
| Operation range | 60-70m with model car; 100-120m with model plane |
| band | 2.4GHz |
| Dimensions | 40 x 25 x 9.3 mm (excluding pins) |
| Weight | 9.6g |
, , , , , , Specifications:, , , , , , , , , , , number of channels: 4, APP download links:, a. IOS system, 1., APP for car/trucks, , 2., APP for airplanes, b. Andriod system, 1., APP for car/trucks, , 2., APP for airplanes, Instruction manual, , ,
Features: Control your model with your iphone, ipad or itouch. ...1 Reviews
HiModel
FRSKY 2.4G FUTABA COMPATIBLE RF MODULE (TWO-WAY) & RECEIVERS COMBO DFT/V8FR
| Operating Voltage Range | 4.8V-6V |
| Operating Current | 30mA |
| Specified Range | 1.2km |
| Resolution | 10bit |
| Latency | 22ms |
| Number of Channels | 8CH |
| Dimensions | 60×37×21 mm |
| Model | DFT, two-way telemetry module |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 11bit (3072) |
| Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7. |
| WFLY | WFT09, WFT08. |
, , , , , , Specifications:, , , , , , , , , , , Receiver specifications:, Transmitter module specifications:, Compatible with the following transmitters:, , ,
Features: ◆ Advanced Continuous Channel Shifting Technology ( ACCST SYSTEM) ...4 Reviews
HiModel
FRSKY TWO-WAY 2.4G 8-CHANNEL RECEIVER D8R-II PLUS
| Model | D8R-II plus |
| Weight | 16.2g |
| Dimension | 54*27*17mm |
| Operating Voltage Range | 4.0V-7.2V |
| Operating Current | 100mA |
| Specified Range | 1.5km (Ground Range) |
| Resolution | 11bit (3072) |
| Latency | 22ms |
| Number of Channels | 8CH |
| Analog voltage | 0~3.3V |
, , , , , , Specifications:, , , , , , , , , , , Receiver specifications:, Compatible with FrSky Two Way module DFT/DJT., (V8 receivers work with DFT/DJT, just in receive-only mode.), , ,
Features: THIS IS THE NEW D8R-II PLUS VERSION. Features a) ...2 Reviews
HiModel
FRSKY TWO-WAY 2.4G 4-CHANNEL RECEIVER D4R-II
| Dimension | 40*22.5*6mm |
| Weight | 5.8g / 5g (naked) |
| Operating Voltage Range | 3.5V-10.0V |
| Operating Current | 60mA |
| Operating Range | Full Range (>1.5km) |
| Resolution | 3072 (>11bit) |
| Compatible with FrSky two way telemetry modules | DFT, DJT, DHT, DHT-U |
, , , , , , Specifications:, , , , , , , , , , , Compatibility, , ,
Features: Features 1) Firmware upgradeable; 2) One external analog telemetry ...HiModel
FRSKY SENSOR HUB FSH-01
| Dimension | 37*30*8mm |
| Operating Voltage Range | 4~10V |
| Operating Temperature Range | -20~80℃ |
| Feature | Firmware upgradable |
, , , , , , Specifications:, , , , , , , , , , , Weight:, Installation:, It is recommended to take the length of all sensors’ wires into consideration before mounting, and use double-sided tape to install FrSky sensor hub at an appropriate place in the model., , ,
Features: FrSky Sensor Hub (FSH-01) FrSky Sensor Hub is recommended ...HiModel
FRSKY RPM SENSOR RPMS-01
| Measurement Range | 0~50000r/min |
| Installation | Point the RPM sensor straight up at any accessory that requires RPM reading. |
| Note | Indoor alternating current lighting will affect the RPM reading. |
, , , , , , Specifications:, , , , , , , , , , , RPM sensor reads RPM data by using an optical sensor., , ,
Features: Different sensors facilitate to monitor different data, such as ...HiModel
FRSKY TWO-WAY 2.4G FUTABA COMPATIBLE RADIO SYSTEM TELEMETRY DFT/D8R-II PLUS
| Model | DFT |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 11bit (3072) |
| Futaba | 3PM, 3PK, 7U, 8U, 8J, 9C, 9Z, 10C, FN series, T10C, FC-18, FC-28. |
| Hitec | Optic 6, Eclipse 7, Prism 7. |
| WFLY | WFT09, WFT08. |
| Model | D8R-II Plus |
| Weight | 16.2g |
| Dimension | 54*27*17mm |
| Operating Voltage Range | 4.0V-7.2V |
| Operating Current | 100mA |
| Specified Range | 1.5km (Ground Range) |
| Resolution | 11bit (3072) |
| Latency | 22ms |
| Number of Channels | 8CH |
| Analog voltage | 0~3.3V |
, , , , , , Specifications:, , , , , , , , , , , Transmitter module specifications:, Compatible with the following transmitters:, Receiver specifications:, , ,
Features: The Two-way Radio System developed by FrSky provides an ...2 Reviews
HiModel
FRSKY 2.4G 4-CHANNEL MICRO RECEIVERS V8R4-II
| Dimensions | 36*17.5*8mm |
| Weight | 3.5g / 2.7g (naked) |
| Operating Voltage Range | 3.0~16.0V (HV version) |
| Operating Current | 30mA |
, , , , , , Specifications:, , , , , , , , , , , FrSky modules, , How to put V8R4-II into binding mode respectively, , V8FT, V8JT, V8HT, , V8_Mode (Non-telemetry), , Connect battery to V8R4-II while holding the F/S button on V8R4-II, , DFT, DJT, DHT, DHT-U in V8_Mode, , (Switch 1 OFF and Switch 2 ON), , DFT, DJT, DHT, DHT-U in D_Mode, , (Switch 1 OFF and Switch 2 OFF), , D_Mode (Telemetry), , Connect Ch1 & Ch2 signal pins of V8R4-II by provided jumper and then, , connect battery to V8R4-II directly (no need to hold the F/S button on V8R4-II), , , ,
Features: THIS IS THE UPGRADED VERSION OVER V8R4. New feature ...4 Reviews
HiModel
FRSKY 2.4G 4-CHANNEL FASST COMPATIBLE RECEIVER TFR4-B
| Operating Voltage Range | 3.5V~10V |
| Operating Temperature Range | -10℃~80℃ |
| Dimension | 42*17*7mm |
| Weight | 4.6g |
| FASST 2.4G | Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode) (including 3PK, 4PK) |
| FrSky TF Modules | TF-8M, TF-14M |
, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 4, Compatibility:, Bind procedure:, 1) Ascertain that the transmitter is in the PPM mode. Turn the transmitter off., 2) Turn on the transmitter while holding the F/S button on the transmitter module. Release the button. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the receiver., 3) Connect the provided binding cable to corresponding channels of VD5M (see 1.1 Compatibility chart for details), and connect battery to the receiver. LED on the receiver will flash, indicating the binding process is completed. Turn off both the transmitter and receiver, and disconnect the binding cable from VD5M., 4) Turn on the transmitter and connect the battery to the receiver. The RED LED on the receiver will indicate the receiver is receiving commands from the transmitter., The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced., Note: Make sure corresponding channels are connected by provided binding cable when working with the transmitter module., , ,
Features: Features 1) Compatible with FASST 2.4G: Air Systems (7CH ...HiModel
FRSKY 2.4G 5-CHANNEL TWO-WAY RECEIVER (NANO JST CONNECTOR) VD5M
| Dimension | 21*16*5.8mm |
| Weight | 2.0g |
| Operating Voltage Range | 3.0V-7.2V |
| Operating Current | 20mA |
| Operating Range | >300M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz Two Way Series, Number of Channels: 5, Bind procedure:, 1) Ascertain that the transmitter is in the PPM mode. Turn the transmitter off., 2) Turn on the transmitter while holding the F/S button on the transmitter module. Release the button. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the receiver., 3) Connect the provided binding cable to corresponding channels of VD5M (see 1.1 Compatibility chart for details), and connect battery to the receiver. LED on the receiver will flash, indicating the binding process is completed. Turn off both the transmitter and receiver, and disconnect the binding cable from VD5M., 4) Turn on the transmitter and connect the battery to the receiver. The RED LED on the receiver will indicate the receiver is receiving commands from the transmitter., The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced., Note: Make sure corresponding channels are connected by provided binding cable when working with the transmitter module., , ,
Features: Features 1) Lighter weight and physically smaller than D8R-II ...3 Reviews
HiModel
ASSAN 2.4G FUTABA COMPATIBLE RF MODULE & RECEIVERS COMBO CF-1 V2 (TWO RECEIVERS X8R6,X8R7)
| FUTABA | 3PM,3PK, 7U, 8U, 8J, 9C , 9Z, and FN series. |
| HITEC | Optic 6, Eclipse 7. |
| WFLY | WFT09 . |
Features:, , Compatible with Futaba radios include:, Includes/Requires:, , Includes:, 1 x RF module, Futaba compatible X8F,
THIS IS THE ASSAN 2.4GHZ RADIO SYSTEM COMBO. CE, FC ...18 Reviews
HiModel
FRSKY 70MM COAX ASSEMBLY FOR DIY MODULES
| Length | 70mm |
, , , , , , Specifications:, , , , , , , , , , , FrSky 70mm Coax assembly for DIY Modules, , ,
Includes/Requires: Includes:1 x coax assembly2 Reviews