HiModel
2.4GHZ 8-CHANNEL RECEIVER FOR N-6H/N-8C TRANSMITTER XY900
| ●TYPE | XY900 |
| ●Measurement | 49 x 33 x 16mm |
| ●Net weight | 17g / 0.61oz |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, ●Channel number: 8, * This receiver only compatible with, 2.4Ghz Transmitter N-6H, and, 2.4Ghz Transmitter N-8C, , , ,
Includes/Requires: Includes: 1 x 8-channel 2.4G receiver 1 x binding ...3 Reviews
HiModel
WALKERA 2.4G 12-CHANNEL RECEIVER DEVO-RX1202
| Type | 2.4GHz 12 channels |
| Sensitivity | -105dbm |
| Frequency Interval | ≥ 4M |
| Weight | 15g |
| Dimension | 47X32X16mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: 1).Adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) that features ...HiModel
WALKERA 2.4G 10-CHANNEL RECEIVER DEVO-RX1002
, , , , , , Specifications:, , , , , , , , , , , WALKERA 2.4G 10-Channel Receiver DEVO-RX1002, , ,
Includes/Requires: Includes: 1 x receiver DEVO-RX1002HiModel
2.4G 6-CHANNEL PARK FLYER RECEIVER AR6100E (JR/SPEKTRUM COMPATIBLE)
| * Type | Park flyer, Foamies, Up to 400 class helis |
| * Modulation | DSM2 |
| * Band | 2.4 GHz |
| * Dimensions (WxLxH) | 20mm x 36mm x 11.6mm |
| * Weight | 4.9 grams |
| * Voltage Range | 3.5v - 9.6v |
| * Antenna Length | 2 @ 30mm each |
, , , , , , Specifications:, , , , , , , , , , , * # of Channels: 6, How to bind?, 1.with the power off, plug the bind plug into the BATT port., 2.power on the receiver. if powered by a separate battery,plug the battery into any unused port., 3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural)., 4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind., 5.remove the bind plug to prevent the system form rebinding the next time the power is turned on., , ,
Features: The AR6100e weighs less than 4.9 grams. The AR6100e ...2 Reviews
HiModel
2.4G 6-CHANNLE DSM2 MICROLITE PARK FLYER RECEIVER AR6110E (JR/SPEKTRUM COMPATIBLE)
| * Modulation | DSM2 |
| * Band | 2.4 GHz |
| * Dimensions (WxLxH) | 21mm x 28.7mm x 10mm |
| * Weight | 4.0 grams |
| * Voltage Range | 3.5v - 9.6v |
| * Antenna Length | 2 @ 30mm each |
, , , , , , Specifications:, , , , , , , , , , , * # of Channels: 6, How to bind?, 1.with the power off, plug the bind plug into the BATT port., 2.power on the receiver. if powered by a separate battery,plug the battery into any unused port., 3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural)., 4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind., 5.remove the bind plug to prevent the system form rebinding the next time the power is turned on., , ,
Features: JR/SPEKTRUM Compatible DSM2 2.4G Micro Receiver. Includes/Requires: Includes:1 x ...HiModel
2.4G 9-CHANNLE MICROLITE DSM2 RECEIVER W/ SATELLITE (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 9-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (W x Lx H) | 30 x 50 x 13mm |
| ◆ Weight | 19g |
| ◆ Voltage Range | 4-10v |
| ◆ Brown-Out Voltage | 4.0v (Always supply power above this voltage) |
| ◆ Antenna Length Main RX | 30mm (2) |
, , , , , , Specifications:, , , , , , , , , , , Wireless simulator interface(W.D.S.C), 1. Main receiver and satellite must connect., 2. Receiver must bind with transmitter first (AUX4 channel do not plug binding harness), 3. AUX3 is the (W.D.S.C) channel, connect with simulator line, 4. BIND channel and AUX4 channel plug the binding harness, 5. Apply power to the receiver with USD line or battery, 6. Turn transmitter on, now both LEDS keep light and simulator works, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LED's should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., General Notes:, Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed., , ,
Features: JR/SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ...1 Reviews
HiModel
MINIMA A-FHSS COMPATIBLE 2.4G 8-CH RECEIVER (HITEC COMPATIBLE)
| Weight | 8.9g |
| Dimension | 44 x 24 x 14mm |
| Connector type | standard JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , MINIMA A-FHSS Compatible 2.4G 8-Ch Receiver (Hitec compatible), Channel number: 8, *For most Hitec 2.4G transmitters, it is likely support the ability to connect to Minima receivers, however for older units, if it doesn't, you may need to update the software to support it., , ,
Includes/Requires: Includes:1 x A-FHSS receiverHiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 4100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
WFT08S 2.4GHZ 8-CHANNEL RADIO SET SUPER EDITION W/RECEIVER WFR09S
| Model | WFT08S |
| Use in | airplane, helicopter, car, boat |
| Band | 2.400GHz-2.483GHz |
| Output power | ≤100Mw (2.4GHz) |
| Modulation | PPM/PCMS 1024/PCMS 4096 |
| RF module | individual |
| Resolution | 4096 |
| Power | 9.6-12V |
| Mix | PROG.NOR.MIX (5 series) PROG.CUR.MIX (2 series) |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz 8 channels R/C System(English Menu, 4096 Resolution), 12- model memory, Multi-lingual, *High Speed, High Resolution, optimized 2.4GHz PCMS 4096 " High Speed, Silk-like smooth", *Convenient stick adjustment, make you free usage, Tree-like Multilayer Menu, human oriented design, easy controlling, Excellent white LED backlight, less visual tiredness, 132 x 64 FSTN LCD screen, 7 point curve (in any X and Y direction edition), easy complex curve adjustment, Data transfer function, easy teaching and learning, Multi-function, intuitive data setting, easy checking, , ,
Includes/Requires: Includes:1 x transmitter 1 x WFR09S receiver * Transmitter ...4 Reviews
HiModel
WFT06II 2.4GHZ 6-CHANNEL RADIO SYSTEM
| Model | WFT06II |
| Use in | Airplane,Helicopter,Car,Boat |
| Band | 2.400-2.483GHz |
| Output Power | ≤100mW |
| Modulation | 2.4GHz DSSS(spread Spectrum)+Frequency Hopping |
| Memory | 8-model memory |
| Power | 3.7-6.0V ≤190mA |
| Transmitter programe language | English |
, , , , , , Specifications:, , , , , , , , , , , Transmitter stick mode: both mode 1 and mode 2 are available, mode 2 (throttle on left hand) will be sent by default. If you need mode 1, you can specify the stick mode in the Remark field on the last step when place the order., , ,
Features: THIS IS THE NEW WFT06II. ● Great choice for ...2 Reviews
HiModel
FLYSKY 2.4GHZ 3-CHANNEL LCD TRANSMITTER AND RECEIVER SET FS-GT3B
| A. Channels | 3channels; |
| B. Model type | car/boat; |
| C. RF power | no more than 10Mw; |
| D. Modulation | GFSK; |
| E. System type | AFHDS; |
| F. Sensitivity | 1024; |
| G. Low voltage warning | yes(less than 9.5V); |
| H. DSC port | yes(3.5mm); |
| I. Charger port | yes; |
| J. Power | 12VDC(1.5V*8); |
| K. Weight | 395g; |
| L. ANT length | 26mm; |
| M. Size | 154*127*270mm; |
| O. Certificate | CE (0678) FCC. |
| A. channels | 3 channels; |
| B. Model type | car/boat; |
| C. RF receiver sensitivity | -105dbm; |
| D. Modulation | GFSK; |
| E. System type | AFHDS; |
| F. Sensitivity | 1024; |
| G. Faisafe | yes(channel 2); |
| H. Bind port | yes(channel 3); |
| I. Power port | yes (VCC); |
| J. Power | 4.5-6.5 VDC (1.5V*4); |
| k. Weight | 5g; |
| L. ANT length | 26mm; |
| M. Size | 37.6*22.3*13mm; |
| O. Certificate | CE(0678) FCC |
, , , , , , Specifications:, , , , , , , , , , , Transmitter Specifications:, N. Color ：black;, Receiver Specification:, Specifications:, N. Color ：black;, , ,
Includes/Requires: Includes: 1 x 2.4G pistol transmitter 1 x 3-channel ...1 Reviews
HiModel
FLYSKY 2.4GHZ 3-CHANNEL RECEIVER FOR FS-GT3B
| A. channels | 3 channels; |
| B. Model type | car/boat; |
| C. RF receiver sensitivity | -105dbm; |
| D. Modulation | GFSK; |
| E. System type | AFHDS; |
| F. Sensitivity | 1024; |
| G. Faisafe | yes(channel 2); |
| H. Bind port | yes(channel 3); |
| I. Power port | yes (VCC); |
| J. Power | 4.5-6.5 VDC (1.5V*4); |
| k. Weight | 5g; |
| L. ANT length | 26mm; |
| M. Size | 37.6*22.3*13mm; |
| O. Certificate | CE(0678) FCC |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specification:, N. Color ：black;, This receiver can only work with, transmitter FS-GT3B, ., , ,
Includes/Requires: Includes: 1 x 3-channel 2.4G receiver 1 x binding ...HiModel
2.4GHZ 3-CHANNEL STICK TYPE TRANSMITTER AND RECEIVER SET FOR CARS N-3
| ●TYPE | LED Edition N-4Q |
| ●Code format | PCM |
| ●Max transmitting power | 10dBm 100mA. |
| ●Max receiving sensitivity | -93dBm. |
| ●Working current at transmitting end | 100ma to 150A. |
| ●Data transfer rate | 19200 bit/sec. |
| Code format | PCM |
| Frequency | 2.4G |
| Net Weight | 530g |
| Code format | PCM |
| Frequency | 2.4g |
| New weight | 13.5g |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, ●Technology of DSSS (direct sequence spread spectrum) 2.4g radio transmission and receiving, ●Working frequency is the worldwide universal frequency band of ISM (industrial scientific and medical) free of charge, and the range is from 2.4 Ghz to 2.483 Ghz., ● Working current at receiving end: , TRANSMITTER:, Channels: 3, DC: 9.6V, ≤150ma, RECEIVER:, Channel number: 3, DC: 4.8 to 5.6V, ≤50mA, * Plain carton packing., , ,
Features: THIS IS THE STICK TYPE 3-CH CAR RADIO. * ...HiModel
2.4GHZ 3-CHANNEL LED TRANSMITTER AND RECEIVER SET LED VERSION N-4Q
| ●TYPE | LED Edition N-4Q |
| ●Code format | PCM |
| ●Max transmitting power | 20dBm 200mA. |
| ●Max receiving sensitivity | -93dBm. |
| ●Working current at transmitting end | 200ma 秋300A. |
| ●Data transfer rate | 19200 bit/sec. |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, ●Technology of DSSS (direct sequence spread spectrum) 2.4g radio transmission and receiving, ●Working frequency is the worldwide universal frequency band of ISM (industrial scientific and medical) free of charge, and the range is from 2.4 Ghz to 2.48 Ghz., ● Working current at receiving end: , * Plain carton packing., , ,
Features: THIS IS THE LED EDITION OF N-4Q RADIO. ● ...2 Reviews
HiModel
2.4GHZ 3-CHANNEL DSSS LCD TRANSMITTER AND RECEIVER SET N-4Q
| ●TYPE | N-4Q DSSS version |
| Code format | PCM |
| ●Frequency | 2.4G |
| ●DC | 9.6V,≤200mA |
| ●Measurement | 295*204*105mm(packing measurement） |
| ●Net weight | 530g |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, * The version using DSSS technology., , ,
Features: THIS IS THE LCD EDITION OF N-4Q RADIO. ● ...14 Reviews