Skip to content

HiModel

XQ-POWER 56G/20KG/ .13SEC 180° ROBOT DIGITAL SERVO XQ-RS420

Speed0.15 sec/60° @ 6V; 0.13 sec/60° @ 7.2V
Torque18.5kg-cm @ 6V; 21.8kg-cm @ 7.2V
Weight56g / 1.46oz
Power Supply6V/ 7.2V
Neutral position1500 µsec
Gear typeTitanium gear
Wire length300mm
Connector typeJR/Futaba compatible
Dimension (mm)A:40.2mm B:20.1mm C:38.8mm D:48.0mm E:10mm

, , , , , , Specifications:, , , , , , , , , , , , ,

Includes/Requires: Includes:1 x servo 1 x servo horn set

HiModel

22G/ 4.6KG/ .13 SEC DIGITAL HIGH VOLTAGE SERVO DS238HV

, , , , , , Specifications:, , , , , , , , , , , Type: DS238HV, Dimension: 29x13x30mm(1.14"x0.51"x1.18"), Weight: 22g(0.77OZ), Working Voltage: 6.0V / 7.4V, Working Current: 300mA / 400mA, Speed: 0.14sec.60º/ 0.13sec.60º, Torque: 4.kg.cm / 4.6kg.cm, Gear Material: Metal, Wire length: 215mm, , ,

Features: THIS IS THE HIGH VOLTAGE SERIES DIGITAL SERVOS FROM ...

HiModel

58G/ 8KG/ .12 SEC DIGITAL HIGH VOLTAGE SERVO DS538HV

, , , , , , Specifications:, , , , , , , , , , , Type: DS538HV, Dimension: 20x40x38.5mm(0.78"x1.57"x1.51"), Weight: 58g, Working Voltage: 6V/7.4V, Working Current: 300mA / 400mA, Speed: 0.13sec.60º/ 0.12sec.60º, Torque: 7kg.cm / 8kg.cm, Gear Material: Metal, Wire length: 300mm, , ,

Features: THIS IS THE HIGH VOLTAGE SERIES DIGITAL SERVOS FROM ...

HiModel

58G/ 14KG/ .18 SEC DIGITAL HIGH VOLTAGE SERVO DS558HV

, , , , , , Specifications:, , , , , , , , , , , Type: DS558HV, Dimension: 20x40x38.5mm(0.78"x1.57"x1.51"), Weight: 58g, Working Voltage: 6V / 7.4V, Working Current: 300mA / 400mA, Speed: 0.20sec.60º/ 0.18sec.60º, Torque: 12kg.cm / 14kg.cm, Gear Material: Metal, Wire length: 300mm, , ,

Features: THIS IS THE HIGH VOLTAGE SERIES DIGITAL SERVOS FROM ...

HiModel

63G / 11KG TORQUE CORELESS METAL GEARS BALL BEARING DIGITAL SERVO SM-S4471M

TypeSM-S4471M

, , , , , , Specifications:, , , , , , , , , , , Products specification, Technical parameters, Size (mm), Weight, Wire, 4.8V, 6V, Rotation angle, Speed, Torque, Speed, Torque, A, B, C, D, E, g, oz, cm, sec/60, o, kg-cm, oz-in, sec/60, o, kg-cm, oz-in, 40.3, 20.2, 37.0, 48.5, 10.0, 63, 2.22, 20, 0.13, 8.9, 123.5, 0.11, 11.0, 152.7, About60°, , ,

Features: Metal gear,coreless motor,double ball bearing,aluminum mesochife,rapid reaction Applicable to ...

Read more

1 Reviews

HiModel

35MHZ WFT09S 9-CHANNEL RADIO W/WFR08-P RECEIVER (SUPER EDITION)

ModelWFT09S
Use inairplane, helicopter, glider, car, boat
Band35MHz
Output power≤750mW (35MHz-75MHz)
ModulationPPM/PCMS 1024/PCMS 4096
RF moduleindividual
Resolution4096
Power9.6-12V
MixPROG.NOR.MIX (7 series) PROG.CUR.MIX (4 series)
Receiver typeWFR08-P

, , , , , , Specifications:, , , , , , , , , , , 9 channels R/C System (4096 Resolution), 85- model memory, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., , ,

Features: ▲High Speed, High Resolution, optimized PCMS 4096 " High ...

Read more

3 Reviews

HiModel

BLUE ARROW 4.3G MICRO-SERVO GEAR SET

, , , , , , Specifications:, , , , , , , , , , , Genuine full set of gears for Blue Arrow Micro 4.3g Servos., , ,

HiModel

TOWERPRO SG-90 MICRO SERVO GEAR SET

Features:, , Includes/Requires:,

Spare Gears for Tower Pro SG-90 Servos

HiModel

TOWER PRO SG5010 SERVO GEAR SET

, , , , , , Specifications:, , , , , , , , , , , , , ,

Features: This is the spare gear set for Towerpro SG5010 ...

HiModel

TOWERPRO 13KG HIGH TORQUE METAL GEAR SERVO

Dimension40.6mm*19.8mm*37.8mm
Weight55.2G
Operating speed0.24sec/60degree(6.0V)
Stall torque13.0kg/cm (6.0V)
Temperature Range-20℃~60℃
Dead band width4ms
Operating Voltage4.8V~7.2V
connector wire length32cm
Structure Feature3 pole ferrite, dual ball bearing, 3 metal ears and 1 Resin metal gear

, , , , , , Specifications:, , , , , , , , , , , , ,

Read more

1 Reviews

HiModel

35MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER

MODEL NO.WFT09H
MODULATIONFM(PPM) and PCM
OUTPUT POWER≤700mW
POWER SUPPLY1.2V x 8 (9.6V)
CURRENT DRAIN200mA
Band35MHz
Receiver typeWFR08-P

, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., , ,

Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...

Read more

4 Reviews

HiModel

TOWER PRO MG995 HEAVY DUTY METAL GEARS SERVOS

Size40.6mm*19.8mm*37.8mm
Weight55.2g
Operating speed0.20sec/60degree(6.0V)
Stall torque11.0kg/cm (6.0V)
Temperature Range-20 degree to 60 degree
Dead band width4ms
Operating Voltage4.8V~7.2V
Structure Feature3 pole ferrite, dual ball bearing, 3 metal gears and 1 Resin metal gear, connector wire length

, , , , , , Specifications:, , , , , , , , , , , , ,

Features: 3 pole ferrite, dual ball bearing, 3 metal gears ...

HiModel

FUTABA STANDARD 25T CNC ALUMINUM SINGLE SIDE ARM - RED

Overall length35.6mm
Mounting holes spacingat 9, 19, 24 mm (approx.) from center of the arm

, , , , , , Specifications:, , , , , , , , , , , Futaba Standard 25T CNC Aluminum Single Side Arm SO004 - red, the outter two holes are threaded., * Fits the FUTABA servos with splined output shafts., , ,

Features: There are two screws designed to hold the arm ...

HiModel

27.5MM FUTABA STANDARD 25T CNC ALUMINUM SINGLE SIDE ARM - BLACK

Overall length27.5mm
Height9.9mm
Mounting holes spacingat 20 mm (approx.) from center of the arm

, , , , , , Specifications:, , , , , , , , , , , 27mm Futaba Standard 25T CNC Aluminum Single Side Arm - Black, the outer hole is threaded., * Fits the FUTABA servos with splined output shafts., , ,

Features: There are two screws designed to hold the arm ...

HiModel

JR STANDARD 23T ALUMINUM SINGLE SIDE ARM - TITANIUM

ColorTitanium
Overall length35.4mm
Mounting holes spacingat 8.5, 20, 24 mm (approx.) from center of the arm

, , , , , , Specifications:, , , , , , , , , , , JR Standard 23T Aluminum Single Side Arm, * Fits the JR, KO, Sanwa servos with splined output shafts., , ,

Features: Suit for JR, KO, Sanwa servos. There are two ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby