HiModel
JR STANDARD 23T ALUMINUM SINGLE SIDE ARM - BLUE
| Overall length | 35.4mm |
| Mounting holes spacing | at 8.5, 20, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , JR Standard 23T Aluminum Single Side Arm - Blue, * Fits the JR, KO, Sanwa servos with splined output shafts., , ,
Features: Suit for JR, KO, Sanwa servos. There are two ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM - BLUE
| Overall length | 35.5mm |
| Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm - Blue, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...HiModel
HITEC STANDARD 24T CNC ALUMINUM SINGLE SIDE ARM - TITANIUM
| Overall length | 35.5mm |
| Mounting holes spacing | at 9, 19, 24 mm (approx.) from center of the arm |
, , , , , , Specifications:, , , , , , , , , , , Hitec Standard 24T CNC Aluminum Single Side Arm - Titanium color, the outter two holes are threaded., * Fits the Hitec servos with splined output shafts., , ,
Features: There are two screws designed to hold the arm ...HiModel
RUBBER GROMMETS FOR STANDARD SIZE SERVOS (20PCS)
, , , , , , Specifications:, , , , , , , , , , , Rubber Grommets for Standard Size Servos (20pcs), For standard size servos like Futaba S3001, S3003 etc., , ,
Includes/Requires: Includes:20 x grommetsHiModel
SERVO CONNECTOR SAFETY LOCK/CLIP (4PCS)
Features:, , Includes/Requires:, , Includes:, 4 x servo joint clips (4pcs),
Clip for servo connector or extension lead joint, to prevent ...HiModel
SERVO ACCESSORY SET(HORN/EYELET/GROMMET/SCREW)
, , , , , , Specifications:, , , , , , , , , , , Servo Accessory Set(horn/eyelet/grommet/screw), Compatible with the following types servos:, DS-919MG, DS-939MG, D929MG, CS-929MG, MD922D, MD933D, MS522S, MS533S, , ,
Includes/Requires: Includes:1 x single arm 1 x double arm 1 ...HiModel
FUTABA SERVO S3003 BULK W/O ACCESSORIES
| Speed | .23sec/60 deg @ 4.8V or .19 sec/60 deg @ 6V. |
| Torque | 44 oz/in @ 4.8V or 56.8 oz/in @ 6V |
| Size | 1.6"L x .8"W x 1.4"H (41x20x36mm) w/o output shaft |
| Weight | 1.3 oz (37.2g) |
| Connector | Futaba standard with approx. 5" lead |
, , , , , , Specifications:, , , , , , , , , , , (3.2kg/cm @ 4.8V or 4.1kg/cm @ 6V), , ,
Features: This is the entry level Servo w/o Accessories except ...HiModel
FUTABA 45G/ 3KG.CM/ .22 SEC STANDARD BALLBEARING SERVO S3001
| Type | S3001 |
| Speed | 0.28sec/60 （4.8V）0.22sec/60 （6.0V） |
| Torque | 2.4kg∙cm（4.8V）3kg∙cm（6.0V） |
| Size | 40.4×19.8×36.0mm |
| Weight | 41.5g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: One S3001 standard servo with preinstalled X shape servo ...HiModel
SERVO HORN SET FOR STANDARD JR SERVOS 23 TEETH
, , , , , , Specifications:, , , , , , , , , , , Servo hornsset for JR standard servos, , ,
Includes/Requires: Includes:6 x single arms 2 x double armsHiModel
SERVO HORN SET FOR STANDARD FUTABA SERVOS 25 TEETH
, , , , , , Specifications:, , , , , , , , , , , Servo Horn Set for Standard Futaba Servos 25 Teeth, , ,
Includes/Requires: Includes:6 x single arms 2 x double armsHiModel
GWS S125 1/2T DOUBLE BALL BEARING SAIL WINCH
, , , , , , Specifications:, , , , , , , , , , , , Model, , , , , Size, ( L x W x H ), , , mm, /in, , , , , Weight, , , , 4.8V, , , , 6V, , , , , Speed, , , (sec/, 60, °, ), , , , , Torque, , , , , Speed, , , (sec/, 60, °, ), , , , , Torque, , , , g, , , oz, , , kg-cm, , , oz-in, , , kg-cm, , , oz-in, , , , S125 1/2T /2BB, , , , 40.5x20x42, , , 1.59x0.79x1.65, , , 50, , , 1.76, , , , 0.78 /180, °, , (0.26, /60, °, ), , , , , 6.6, , , , 92, , , , 0.64 /180, °, , (0.21, /60, °, ), , , , , 7.6, , , , 106, , STD = Teflon Bushing+Build in plastic bushing with Top Case., 2BB= 2 Ball Bearings MG= Metal Gear with Ball Bearings, , ,
Features: GWS servos are designed compatible with RC systems manufacturered ...HiModel
GWS S136GM BB DOUBLE BALL BEARING LOW PROFILE & LANDING GEAR RETRACT SERVO
, , , , , , Specifications:, , , , , , , , , , , , Model, , , , , Size, ( L x W x H ), , , mm, /in, , , , , Weight, , , , 4.8V, , , , 6V, , , , , Speed, , , (sec/, 60, °, ), , , , , Torque, , , , , Speed, , , (sec/, 60, °, ), , , , , Torque, , , , g, , , oz, , , kg-cm, , , oz-in, , , kg-cm, , , oz-in, , , , S136GM 2BB, , , , 45.0x22.7x24.5, , , 1.77x0.89x0.96, , , 34.0, , , 1.20, , , 0.5, , , 7.40, , , 103, , , 0.33, , , 8.00, , , 111, , STD = Oiliness Bearing 2BB = 2 Ball Bearings, ** S136G-MG / S136L-MG = Semi-Gold Gear (plasticx3,gold x3) **, , ,
Features: GWS servos are designed compatible with RC systems manufacturered ...1 Reviews
HiModel
SPRINGRC 57G METAL GEAR BALL BEARING ROBOT SERVO TYPE SR-402P
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: * Metal output ball bearing adopts hexagon connected with ...1 Reviews
HiModel
GWS S125 3T DIGITAL SAIL WINCH S125 3T D
| Rotating turns | 3 turns |
| Weight | 50g/1.76oz |
| Torque/speed | 4.8V 2 seconds/360 (0.33 second/60°); 9.2Kg |
, , , , , , Specifications:, , , , , , , , , , , GWS S125 3T Digital Sail Winch S125 3T D, Manufacturer code：S125-3T D, 6V 1.8 second/360°(0.3 second/60°) 10.2Kg, , ,
Includes/Requires: Includes:1 x sail winch 1 x round reeling wheel ...HiModel
SPRINGRC 44G / 6.2KG 360° ROBOT SERVO S4306R
, , , , , , Specifications:, , , , , , , , , , , JR interface，360°with Robot Servo,4plastic gears+1metal gear.double ball bearing., , 4.8V, , 6V, , Size (mm), , Weight, , Speed, , Torque, , Speed, , Torque, , A, , B, , C, , D, , E, , g, , oz, , R/M, , kg-cm, , oz-in, , R/M, , kg-cm, , oz-in, , 42.0, , 20.5, , 39.5, , 49.0, , 10.0, , 44, , 1.55, , 60.0, , 5.0, , 69.4, , 50.0, , 6.2, , 86.1, , , ,
Features: JR interface，360°with Robot Servo,4plastic gears+1metal gear.double ball bearing. Includes/Requires: ...3 Reviews