BevRC
VIDEO SPLITTER----1 INPUT 4 OUTPUTS
| Video input level | 2.0Vpp |
| Power supply voltage | 12V(3S) |
| Output level | 0.5-1.5Vpp |
| Output impedance | 75ohm |
| Dimension(WxDxH) | 168*68*23mm |
Fetures:, Samll size, easy to install., Specs:,
If u want build a good ground station, ang get ...BevRC
VOLTAGE REGULATOR---AUTO STEP-UP AND STEP-DOWN MODULE
| Input volt | 3-35V |
| Output volt | adjustable?1.25-30V |
| Input amp | 2A (MAX) |
| Output amp | 2A(MAX) |
| power | 12W |
input output efficiency:, 3.7V 5V 0.5A 75%,
Input volt >= 10V 4.2V 12V 0.4A 5.0V 12V 0.5A ...BevRC
VOLTAGE REGULATOR FOR POWER SUPPLY--STEP-DOWN
| Volt input | 4.5 |
| Volt output | 1.25-30V adjustable randomly |
| Amp | Normally 2A, Max 3A |
| Efficiency | 92% at most |
| weight | 11g |
| size | 5*2.3*1.3 |
Minmum volt difference: 2V,
-35V Ripple? Input 12V output 5V 3A 15mV(MAX) Input 24V ...BevRC
BEV-180°DIGITAL SERVOS WITH METAL GEARS
| Idle current | 5mA at stopped |
| Block up to turn electric current | 600mA |
| Angle deviation? center | <�0.5 degree; angle �40 degree, error |
Please check the demo video below:,
MD180, this is a customed servo for FPV use, u ...BevRC
BEV OSC 420-PAL
| Pixels NTSC | 510x492, PAL |
Specifictions:, 1/3" Sony color CCD sensor.,
Industry standard composite video output. 420 TV-line resolution. Minimum Illumination ...BevRC
PANDA AUTOPILOT WITHOUT DATA RADIO
Table :, Unless specified, values are at operating temperature of 25 ℃., Your purchase includes:, 1:Panda autopilot module, 2:Panda Remote adaptor Board, 3:FYGPS(10hz)module, 4:FYCS100A current sensor, 5:Ground Station GCS Software, 6:Related Wirings, 7:English manual,
Technical parameters Component MinValue Standard Value Max Value Units Remark ...BevRC
BEV 1.2GHZ 200MW TX FOR FPV
G TX Series:, 200mW(4，5，6，7),
If you are using a 2.4G radio, or you fly ...BevRC
BEV 2.4G 500MW PLUG AND PLAY SYSTEM SPECIALLY DESIGNED FOR FPV
| - Working voltage | DC 7-16 volts |
| - Camera output | 12 volts |
| - 8 Selectable channels | DIP switches |
| - Working frequencies | CH1 |
| - Current consumption | 300mAh |
| - Dimensions | 14 x 26 x 39 mm (0.45" x 1" x 1.5" inches). |
| - 8 Selectable channels | DIP switches |
| - Working frequencies | CH1 |
| - Working voltage | DC 9- 13 volts- Current consumption |
| - Dimensions | 13 x 52 x 60 mm (0.4" x 2" x 2.5" inches). |
| RED | DC7-16 Volts input |
| BLACK | GND |
| RED | V output for your cam, normally 0.5V less than the DC input from the 2-pin connector. |
| BLACK | GND |
| YELLOW | VIDEO |
| WHITE | AUDIO (6.0Mhz),normally no use |
| GREEN | AUDIO(6.5Mhz),normally no use |
Download the manual here:, , Transmitter's features:, - High grade switching regulator., Receiver's features:, - Dual (2x) A/V outputs., Includes:, - BEV 2.4 GHz 500mw transmitter, TX:, Always check the color of every wires, then you won't go wrong., The 2-pin connector:, The 5-pin connector:, RX: you can also find the channel diagram on the receiver's mental cover.,
The tiny pocket size receiver besides its small size, it ...BevRC
FRSKY BATTERY VOLTAGE SENSOR LITE
| FrSky D series accessories | serial cable |
| http | //www.frsky-rc.com/download.asp |
Introduction:, FrSky Battery Voltage Sensor is provided as Two Way Telemetry System’s Optional Accessory. There are three voltage ranges to choose: 1S lipo for battery voltage range from 0V~6.6V, up to 3S lipo for 0V~13.2V and up to 5S lipo for 0V~19.8V. Please check the battery voltage division ratio for each option below:, Recommended Voltage Option Max Lipo Pack Count Battery Voltage Division Ratio, 1S 1S 2:1, 2S 3S 4:1, 3S 5S 6:1,
Product Show FBVS-01 Category：Accessories Description More detail：BevRC
FRSKY LIPO VOLTAGE SENSOR
| Dimension | 45*21*7mm |
| Weight | 5.2g |
| Measurement range | 1S~6S (The first lipo voltage should be more than 3.55V) |
| Cell voltage display range | 0.20~4.20V |
| Model | FLVS-01 |
| Dimension | 45*21*7mm |
| Weight | 5.2g |
| Measurement range | 1S~6S (The first lipo voltage should be more than 3.55V) |
| Cell voltage display range | 0.20~4.20V |
| Voltage display resolution | 0.01V |
| Voltage detection precision | 0.05V |
| Current of the board | 15.5mA |
| Operating temperature range | -30℃~70℃ |
| Pixel | 128*64 with OLED display screen |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=22 |
| http | //www.frsky-rc.com/download.asp?id=23 |
| http | //www.frsky-rc.com/download.asp?id=23 |
1. Specifications:, , ﹡Note:, When FLVS-01 works with sensor hub and FLD-02/DHT-U to display total voltage and cell voltages as connected, please refer to below points:, , Driver for XP/ Win7 Vista:, FSH-01 Upgrade ROM_V2.0:, How-to_sensor hub upgrade:, Driver for XP/ Win7 Vista:, DHT-U Upgrade ROM_V2.0:, How-to_DHT-U upgrade:,
Product Show FLVS-01 Category：Accessories 2. Set Up 2.1 FrSky Lipo ...BevRC
BEV BLUE 5.8G CLOVERLEAF ANTENNA 3 LOBES FOR TX(SMA,FOLDABLE)
| Frequency Range | 5725-5875Mhz |
| Impedance | 50ohm |
| VSWR | <1.3 |
| Gain | 2dBi |
| Polarization | Right hand circularly polarized |
| Max power input | 20W |
Spec:,
The new batch of cloverleaf antenna with foldable cable, the ...BevRC
FY-41AP AUTOPILOT FOR FIXED WING(HI-RES OSD AND AIR-SPEED SENSOR)
| The latest firmware and upgrade software | Download |
| The latest FY-DOS&41AP-SETTING software for fix-wing | Download |
| More FY-41AP related downloads | Click in |
| The latest firmware and upgrade software | Download |
| The latest FY-DOS&41AP-SETTING software V1.2 for multi-rotors | Downlad |
| More FY-41AP related downloads | Click in |
| Warm prompt | You should to do the firmware upgrade separately for FY-41AP-OSD control module and OSD module. |
| FY-41AP-OSD firmware V1.10 and upgrade software | Download |
| GCS for FY-41AP | GCS V4.1 |
> For more detail:, >> Read online :, FY-41AP manual (Fix-wing), >> Related download for fix-wing :, >>> The latest firmware :, FY-41AP firmware for fix-wing V1.10, > For more detail:, >> Related download for multi-rotors :, >>> The latest firmware :, FY-41AP firmware for multi-rotors V2.1, Integrated OSD Video Overlay System, FY-41AP overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more.,
FY-41AP is an inertial attitude measurement instrument used for FPV ...