ReadyMadeRC
PREMIUM HEAT SHRINK TUBING - 3/16" (4.5MM) BLACK, 12"
,
Premium heat shrink tubing sold in 12 inch (30cm) sections. ...ReadyMadeRC
T-MOTOR CARBON FIBER PROP (2PCS) - 12 X 4
,
High quality Carbon Fiber props from Tiger Motor! - Includes ...ReadyMadeRC
T-MOTOR CARBON FIBER PROP (2PCS) - 15 X 5.5
,
High quality Carbon Fiber props from Tiger Motor! - Includes ...ReadyMadeRC
T-MOTOR ESC - 60 AMP, 2-6 CELL
Output | Continuous 60A, Burst 80A up to 10 Secs. |
Input Voltage | 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery. |
BEC | Pentium-60A |
Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM |
Size | 70mm (L) * 31mm (W) * 14mm (H). |
Weight | 60g. |
2.Multiple protection features | Low-voltage cut-off protection / over-heat protection / throttle signal loss protection. |
3.3 start modes | Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters. |
Features:, 1.Extreme low output resistance, super current endurance.,
ESC60A 4.Throttle range can be configured and is fully compatible ...ReadyMadeRC
HITEC SKYSCOUT KIT (EASY STAR 2) AIRFRAME AND PLASTIC PARTS
Wingspan | 54.5 in. |
Weight | 24.5 oz. |
Length | 38.6 in. |
Wing Area | 372 sq. in. |
Wing Loading | 5.47 oz./sq.ft. |
SPECIFICATIONS:, , Includes:,
CAN NOT BE BACK ORDERED SkyScout Kit Combining the durability ...ReadyMadeRC
CC3D OPENPILOT COPTERCONTROL BOARD BY READYMADERC
CC3D from the OpenPilot project introduces a hardware refresh of the highly regarded multi-purpose aircraft stabilization platform. The CopterControl platform has been designed from the ground up to perform the following functions:, A MultiRotor controller with auto-level, including TriCopters, QuadCopters and HexaCopters, The CopterControl hardware has the following features:, Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM, For info:,
CopterControl 3D (CC3D) from the OpenPilot project introduces a new ...ReadyMadeRC
BOSCAM TS351+RC805 5.8G 200MW FPV KIT
Transmitter frequency | 5645-5945MHz;8CH |
Transmitting Power | 200mW/23dBm |
Transmitting distance | >2000m(open area) |
Frequency control | built-in frequency and phase lock loop |
AV input | analog AV signal input |
ANT connector | SMA(inside the needle) |
Power supply | 6.5-12 volts |
Current supply | 200mA |
Size | 55*26*17mm |
Net weight | 43g |
Gross weight | 52g |
Receiving frequency | 5645-5945MHz;8CH |
Receiving sensitivity | -90dBm |
Frequency control | built-in frequency and phase lock loop |
Double lines AV output | analog AV signal output |
Antenna connector | SMA(Inside the needle) |
Power supply voltage | 5-12V |
Supply current | 150mA |
Dimension | 75*54*15mm |
Gross weight | 130g |
Notes: These use reverse polarity, RP-SMA connectors and may require an adapter with the use of some antennas. Normally RP-SMA Female to SMA Female., Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
TS351 5.8G 200mW AV wireless transmitter RC805 New version 5.8G ...ReadyMadeRC
T-MOTOR ESC - 30 AMP PRO, 2-6 CELL, NO BEC
Current | 30A |
BEC Mode | no Bec |
Battery | 2-6cells lithium battery or |
Weight | 27.5g |
Size(L*W*H) | 55mm*25mm*12mm |
ReadyMadeRC
T-MOTOR ESC - 18 AMP, 2-4 CELL
Output | Continuous 18A, Burst 22A up to 10 Secs. |
Input Voltage | 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery. |
BEC | 2A / 5V (Linear mode). |
Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM |
Size | 45mm (L) * 24mm (W) * 11mm (H). |
Weight | 19g. |
2.Multiple protection features | Low-voltage cut-off protection / over-heat protection / throttle signal loss protection. |
3.3 start modes | Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters. |
Features:, 1.Extreme low output resistance, super current endurance.,
CLOSEOUT ESC18A 4.Throttle range can be configured and is fully ...ReadyMadeRC
T-MOTOR PRO PROGRAMMING CARD (FOR 30A PRO ONLY!)
,
T-Motor LED ESC Programmer Card 1- Brake Setting 2- Battery ...ReadyMadeRC
REPLACEMENT MOTOR SHAFT - 4MM FOR MN3510 (2PCS)
,
Replacement T-Motor shaft for the 3510 Motor. (2pcs per bag)ReadyMadeRC
REPLACEMENT C-CLIPS - FOR 3.175MM SHAFTS (10PCS)
,
Replacement T-Motor C-Clips for 3.175mm shafts. (10pcs per bag)ReadyMadeRC
REPLACEMENT C-CLIPS - FOR 2MM SHAFTS (10PCS)
,
Replacement T-Motor C-Clips for 2mm shafts. (10pcs per bag)ReadyMadeRC
REPLACEMENT C-CLIPS - FOR 4MM SHAFTS (10PCS)
,
Replacement T-Motor C-Clips for 4mm shafts. (10pcs per bag)