ReadyMadeRC
T-MOTOR CARBON FIBER PROP (2PCS) - 5 X 3
,
High quality Carbon Fiber props from Tiger Motor! Includes 1 ...ReadyMadeRC
CXN - MOBIUS + FPV CAMERA PAN & TILT
Recommended servo size:,
Mobius + FPV flight camera Pan & Tilt camera mount, ...ReadyMadeRC
CXN - GOPRO HERO + FPV PAN & TILT VERSION 1
Recommended servo size:,
This version is for those with limited space and need ...ReadyMadeRC
CXN - GOPRO HERO3 + FPV CAMERA PAN & TILT VERSION 2
IMPORTANT: Servo measurements are different between brands, this mount was designed using this servos below (you can use other brands just be sure to,
This version is made only for the Hero 3 or ...ReadyMadeRC
AIR TITAN 6A UBEC
| UBEC input voltage | 2-6s lipo. |
):, 6V, 5.5v,,
Jumper Positions ( Closest to large black chip first 5vReadyMadeRC
AIR TITAN 6KG METAL GEAR AILERON SERVO
| Max. torque | 6.0-6.5kg |
| Input voltage | 4.8-6.0v |
ReadyMadeRC
CHIMERA FLYING WING - BASIC KIT
| Battery | 2X 3S 4000 Lipo |
| Range | 35 miles round trip |
| Flight time | 45 minutes |
| AUW | 1.8Kg (just under 4 lbs) with video gear |
| Weight | 2kG (4.2lbs) |
| Range | 50km (35 miles) |
| Speed | 110km/h (75mph) |
| Distance | 60km (40 miles) round trip |
| Batteries | 2X 3S 4000mAh Lipo |
Specifications:, , Both the PRO and Standard version come with the following:, , The Pro comes with these extras:, , Motor:, I recommend a 400-600 Watt motor. More power is fun, but anything over 700Watts is more than you need with this airplane and will reduce flight times. I personally use a 3015 - 1640kv and 8X prop. A large 1500 kV and 9X5 or 9X6 would do well also., Servos:, The pro has cuts for 12 gram metal gear servos (I like the Corona 939MG's, personally). However a larger servo can be beneficial such as the Hitec HS82MG. I recommend a metal gear servo as the elevons are solid wood and can strip a servo in a wreck., Average flight expectations:, , Build Tutorial:,
Top (recommended) speed - 95mph Solid wood ailerons (not coroplast!) ...ReadyMadeRC
CHIMERA FLYING WING - PRO KIT (GOPRO HOUSING, LINKAGES)
| Battery | 2X 3S 4000 Lipo |
| Range | 35 miles round trip |
| Flight time | 45 minutes |
| AUW | 1.8Kg (just under 4 lbs) with video gear |
| Weight | 2kG (4.2lbs) |
| Range | 50km (35 miles) |
| Speed | 110km/h (75mph) |
| Distance | 60km (40 miles) round trip |
| Batteries | 2X 3S 4000mAh Lipo |
Specifications:, , Both the PRO and Standard version come with the following:, , The Pro comes with these extras:, , Motor:, I recommend a 400-600 Watt motor. More power is fun, but anything over 700Watts is more than you need with this airplane and will reduce flight times. I personally use a 3015 - 1640kv and 8X prop. A large 1500 kV and 9X5 or 9X6 would do well also., Servos:, The pro has cuts for 12 gram metal gear servos (I like the Corona 939MG's, personally). However a larger servo can be beneficial such as the Hitec HS82MG. I recommend a metal gear servo as the elevons are solid wood and can strip a servo in a wreck., Average flight expectations:, , Build Tutorial:,
Top (recommended) speed - 95mph Solid wood ailerons (not coroplast!) ...ReadyMadeRC
TEAM LEGIT "LEGIT WING"
Un-boxing and what's included:, , Recommended equipment:, , Build Videos:,
While Supplies Last, Do Not Backorder! Team Legit "Legit Wing" ...ReadyMadeRC
TIGER MOTOR MN1806 1400KV
Specifications:, KV..............................................................................................................1400,
High quality motors from RC Tiger Motor! Configu ration....................................................................................12N14P Stator ...ReadyMadeRC
3DR PIXHAWK
| Weight | 38g (1.31oz) |
| Width | 50mm (1.96") |
| Thickness | 15.5mm (.613") |
| Length | 81.5mm (3.21") |
Note:, Pixhawk is a PPM-input autopilot, which means that it gets RC input from a single cable to the receiver, either via the PPM port, the Futaba S.BUS port, or the special satellite receiver port for Spektrum gear. Most modern RC receivers (and all those sold by 3D Robotics) allow for PPM output, but some, such as non-S.BUS Futaba receivers, do not. If your receiver does not support PPM output, please add a PPM encoder board option to your order below., Pixhawk includes:, , Options:, , Microprocessor:, , Sensors:, , Interfaces:, , Power System:, , Weight and Dimensions:, ,
Pixhawk is an advanced autopilot system designed by the PX4 ...ReadyMadeRC
TIGER MOTOR MN1806 2300KV
Specifications:, KV..............................................................................................................2300,
High quality motors from RC Tiger Motor! Configu ration....................................................................................12N14P Stator ...ReadyMadeRC
AIR TITAN VELCRO PACKAGE
| Hook Tape Length | 1000MM |
| Loop Tape Length | 500MM |