HobbyKing
HOBBYKING RED BRICK 60A ESC (OPTO)
| Max Amps | 60A |
| Ubec | Nil |
| Cells | 2~7s |
| Size | 83mm x 15mm 39mm |
| Weight | 63g (Inc Wires) |
5 Reviews
HobbyKing
NEMESIS RACER EP 1560MM (ARF)
| Wingspan | 1560mm |
| Length | 1200mm |
| Flying Weight | 2000g~2100g |
| Wing Loading | 51~54dm2 |
| Wing Area | 39.2dm2 |
Specs:, Requires:, Your Own 4 Channel TX/RX,
The Nemesis is the most succesful Formula 1 air racer ...5 Reviews
HobbyKing
RAZOR FULL COMPOSITE HIGH PERFORMANCE SLOPE SOARER W/FLAPS 1500MM (ARF)
| Wingspan | 1500mm |
| Length | 1030mm |
| Airfoil | HN1038 |
| Wing Area | 21.56dm/2 |
| Flying Weight | 860g~900g |
Features:, High Performance Model, Specs:, Requires:, Your Own 6 Channel TX/RX,
The Razor is a high performance, top quality, full composite ...5 Reviews
HobbyKing
FRSKY VD5M 2.4GHZ 5CH MICRO RECEIVER (TELEMETRY CAPABLE)
| Operating Voltage Range | 3.0~7.2V |
| Operating Current | 20mA |
| Operating Range | >300M |
| Size | 21x16x5.8mm |
Compatibility:, - FrSky modules (V8 mode and D mode), Features:, - Super small and light weight, designed for park flyers and indoor models, *Note:, This RX uses micro JST connectors, Specs:, Number of Channels:5, Weight:2g,
Super small and light weight, the FrSky VD5M is a ...5 Reviews
HobbyKing
TURNIGY FATBOY 8 1300W WORKSTATION CHARGER
| Pack capacity | 20mAh to 360000mAh |
| Input voltage | 10-32VDC, reverse polarity protected |
| Input current | 1A to 60A, software limited |
| Output battery charge current | Adjustable range 10mA to 40A, limited by 60A input current |
| Output battery discharge current | Internal discharge 10mA to 10A, 100W max |
| Continuous max output power | 600W @ +12VDC input, 1300W @ +26.35VDC |
| Cell balancing | Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging |
| Cell balancing current | 1A per cell |
| Current calibration | Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA |
| Data integrity | Checksum, CRC checking |
| Cooling fans | Twin, 13 CFM, 50mm diameter |
| Heat sink | Internal 200W aluminum, thin finned |
| Output battery connector | JST PA series, 9 position |
| LCD | 2 line, 16 character, light grey/blue backlit |
| Size | 148 x 167 x 91mm |
Specs:, Battery type:, Lithium Polymer, Lithium Ion, Lithium Manganese, Voltage calibration:, Cell voltage measurements are factory calibrated to a, Note: Balance board required, sold separately. See related items below. Optional PC interface cable also sold seperatly.,
POWER Introducing a charger like no other...the Turnigy Fatboy 8 ...5 Reviews
HobbyKing
RIOT FULL COMPOSITE HIGH PERFORMANCE V-TAIL GLIDER W/FLAPS 2000MM (ARF)
| Wingspan | 2000mm |
| Length | 1180mm |
| Airfoil | MH32 |
| Wing Area | 43.8dm/2 |
| Flying Weight | 1250g~1450g |
Features:, High Performance Model, Specs:, Requires:, Your Own 6 Channel TX/RX,
The Riot is a high performance, top quality, full composite ...5 Reviews
HobbyKing
REVERB FULL COMPOSITE HIGH PERFORMANCE ELECTRIC GLIDER 1320MM (ARF)
| Wingspan | 1320mm |
| Airfoil | MH43 |
| Wing Area | 16.8dm/2 |
| Flying Weight | 900g |
Features:, High Performance Model, Specs:, Length:, 720mm (Not including Spinner), Requires:, Your Own 4 Channel TX/RX,
The Reverb is a high performance, top quality, full composite ...5 Reviews
HobbyKing
SPITFIRE 60 SPORT SCALE 1650MM (ARF)
| Wing span | 1650mm |
| Length | 1430mm |
| Auw | 3100-3300g |
Features:, • Quality all built up balsa/ply construction, Specs:, Requires:, 6 channel radio (minimum),
The Spitfire 60 Sport is an all balsa/ply constructed .60 ...HobbyKing
HOBBYKING RED BRICK 20A ESC
| Max Amps | 25A |
| Ubec | 5v / 2A |
| Cells | 2~3s Lipoly |
| Size | 48mm x 8mm 26mm |
| Weight | 20g (Inc Wires) |
5 Reviews
HobbyKing
TURNIGY 6600MAH 4S 14.8V 60C HARDCASE PACK
Minimum Capacity:, Configuration:, Constant Discharge:, Pack Weight:, Pack Size:, Charge Plug:, Discharge Plug:,
The new number one in performance and price! The Turnigy ...HobbyKing
ARCUS F3A AEROBATIC BIPLANE EPO 1000MM (PNF)
associated with the ..." />
Wingspan:, Length:, Flying Weight:, Wing Area:, Motors:, :, Servo:, 4 CH transmitter and receiver,
Arcus [ahr-kuhs] A low, horizontal cloud formation associated with the ...HobbyKing
SERPENT S411 SPORT 1/10 (KIT)
| • Top deck | Durable black glass-fiber top deck with optimised flex design. |
| • Rear upright | Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels. |
| • Motor mount | Machined aluminium motor mount / middle shaft support. |
| • Gear-diff | Very compact ball raced gear differential in the rear, with steel gears and axles for durability. |
| • Spool | Front nylon lightweight spool with screw mounted front gear pulley. |
| • Transmission / belts / pulleys | Smooth low friction fine pitch belts combined with optimised nylon pulleys |
| • Shock absorbers | Latest type RCM competition shock absorbers with membranes and checked color coded race springs. |
| • Optional upgrades | The Serpent 411 Sport i |
• Chassis: Super narrow, symmetrical, durable black glass-fiber chassis plate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for gear diff, spool and spur., • Shock tower front: Black glass fiber shock tower with 3 upper shock mounting holes to choose from. Holes for an extra central body post are already made as well., • Front bracket: Machined aluminum front brackets, with belt tension adjusting through ex-centers. Suspension brackets in durable nylon., • Front suspension: Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option., • C-hub / steering block: The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheel guidance without chatter., • Shock tower rear: Black glass fiber shock tower with 4 upper shock mounting holes to choose from. The rear body posts are mounted to the top of the rear shock tower., • Rear bracket: Machined aluminum rear brackets, with belt tension adjusting through ex-centers. Suspension brackets in durable nylon with 3.0 RR FR and split type 0.0 blocks RR FR, • Rear suspension: Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.,
HobbyKing™ is now carrying another famous brand - Serpent! Both ...HobbyKing
HOBBYKING AVRO LANCASTER V2 THUMPER MKIII 4 ENGINE BOMBER EPO 1320MM (PNF)
| Props | 6 Channel TX/RX |
Wingspan:, Length:, Flying Weight:, Motors:, ESC:, Servos:,
The Avro Lancaster was one of the finest bombers of ...HobbyKing
HOBBYKING RED BRICK 60A ESC (OPTO)
| • Multiple self protection functions | abnormal voltage input, low battery protection, over thermal protection, throttle signal loss |
Constant Current:, Max Burst Current:, Input Voltage:, BEC:, Dimensions:, Weight:, Servo Lead:,
The HobbyKing Red Brick s wont win first place for ...