HiModel
57MM /2.25 INCH PLASTIC SPINNERS - YELLOW
| Size | Φ57x 59(H) mm |
| Weight | 24.2g |
, , , , , , Specifications:, , , , , , , , , , , Plastic Spinner for 2-blade prop, , ,
Includes/Requires: Includes:1 x plastic spinner 2 x screwsHiModel
PITCH GUAGE (AIRPLANE & HELICOPTER COMPATIBLE)
| Size | 11x 6 CM |
, , , , , , Specifications:, , , , , , , , , , , Airplane and helicopter compatible., * For helicopter application, suit for 250 to 700 class blades., , ,
Includes/Requires: Includes:1 x pitch gaugeHiModel
HIGH SENSITIVITY MAGNETIC SUSPENSION PROPELLER BALANCER - MAX LOAD 150G
| Weight | 47g |
, , , , , , Specifications:, , , , , , , , , , , High Sensitivity Propeller Balancer, Suit for 2-blade propeller less than 150g., * Does NOT suit for propellers more than 150g in weight., , ,
Features: - Tapered propeller holder, automatically align the propeller to ...HiModel
HIGH SENSITIVITY MAGNETIC SUSPENSION PROPELLER BALANCER MAX LOAD 250-300G
, , , , , , Specifications:, , , , , , , , , , , High Sensitivity Propeller Balancer, Suit for 2-blade propeller less than 250-300g., * Does NOT suit for propellers more than 250-300g in weight., , ,
Features: - Tapered propeller holder, automatically align the propeller to ...HiModel
SIMPLIFIED PROPELLER BALANCER - TYPE B
| Supported prop type | 2-4 blades |
, , , , , , Specifications:, , , , , , , , , , , Simplified Aluminum Propeller Balancer, Weight: 8g, , ,
HiModel
HIMODEL CLOUD SERIES 1803- 1900KV OUTRUNNER BRUSHLESS MOTOR FOR QUADCOPTER/MULTI-ROTOR AIRCRAFT (SHAFT REVERSABLE)
| Model | C1803-1900KV |
| KV (rpm/v) | 1900 |
| Non-load current | 0.4a @7V |
| Lipo Battery (cell) | 2S-4S Li-poly |
| Power | 45W |
| Resistance | 0.480mΩ |
| Wire length | 15cm |
| Weight | 17.3g / 0.61oz (with wires) |
| Application | specially designed for quadcopter and multi-rotor aircrafts. |
, , , , , , Specifications:, , , , , , , , , , , Type, , Prop, , Voltage(V), , Current(A), , g/w ratio, , Pull（g), , C1803, , 7x3.5 3-blade, , 7.4, , 2, , 6.08, , 90, , , , , , 7.4, , 4.7, , 5.46, , 190, , , ,
Features: Specially designed for muti-rotor aircraft application. Motor shaft is ...HiModel
GF55II 55CC PETROL TWIN-ENGINE FOR RADIO CONTROL AEROPLANE
| Type | two-stroke piston valve petrol aircraft engine |
| Displacement | 55cc (27.2cc x 2) |
| Bore x Stroke | 34mm x 30 mm |
| Dry Weight | 1780g (without ignition battery) |
| Carburetor | Walbro (Diaphragm & butterfly valve) |
| Max Output | 5.6 HP @ 7600 rpm |
| RPM range | 1600-7800 rpm |
| Ignition | 4.8v Auto Timing Ignition |
| Fuel mix (ratio of gasoline and oil) | 25 to 40 |
| Propeller | 20 x 12 to 23 x 8 (2-blade prop) (suggested prop 22x 8) |
, , , , , , Specifications:, , , , , , , , , , , Muffler and Electronic Ignition Included !, , ,
4 Reviews
HiModel
GP50R 50CC PETROL ENGINE FOR RADIO CONTROL AEROPLANE
| Type | 2 cycle air cooled gasoline engine for airplane use only. |
| Displacement | 50.8cc |
| Bore x Stroke | 43mm x 35mm |
| Dry Weight | 1740g (without ignition battery) |
| Carburetor | Walbro butterfly type w/pump |
| Max Output | 5.4 HP @ 7800 rpm |
| RPM range | 1300-7600 rpm |
| Ignition | 4.8v Auto Timing Ignition |
| Fuel mix (ratio of gasoline and oil) | 25 to 35 |
| Propeller | 22 x 10 ,22 x 8, 23x 8, 24x6 (2-blade prop) |
, , , , , , Specifications:, , , , , , , , , , , Muffler and Electronic Ignition Included !, , ,
2 Reviews
HiModel
CRRCPRO 26CC PETROL/GAS ENGINE FOR AIRPLANE TYPE GP26R
| Type | 2 cycle piston valve type gasoline engine for aircraft |
| Displacement (cc) | 26cc |
| Bore x Stroke (mm) | 34mm x 28.6mm |
| Carburetor | Walbro(Diaphragm butterfly valve type) |
| Maximum Output | 3.15ps /9000rmp |
| RPM rang | 1600-9000rpm |
| Weight | about 1100g (without ignition battery) |
| Fuel | Gas/Oil mix 25-35 |
| Ignition power | 4.8V (auto advanced) ( |
| Propeller suggestion | 18x6, 18x8, 18x10, 19x6 (2-blade prop) |
| Glow plug type | CM6 |
| Length | 175mm |
| height | 170mm (to top of glow plug), 130mm (to top of cylinder head) |
, , , , , , Specifications:, , , , , , , , , , , Parameter:, * Do not use 6V or higher for the CDI power supply., ), Dimensions:, Width 100mm, , ,
Includes/Requires: Includes:1 x engine 1 x CDI 1 x muffler ...4 Reviews
HiModel
JBA J15G 15CC PETROL ENGINE FOR AIRPLANE
| Engine Type | Gasoline Two-stroke, Air Cooled |
| Displacement(cc) | 14.93cc (.90 c.i.) |
| Bore x Stroke (mm) | 27.8 x 24.6 |
| Carburetor | Walbro WT series (Diaphragm & butterfly valve) |
| Maximum output | 3.2HP @ 12000RPM |
| RPM range | 1800 to 13000 RPM |
| Ignition | Auto advanced Rcexl DC-CDI with special spark plug cap |
| Spark plug type | 1/4*32 Rcexl |
| Lubrication oil | 2 cycle engine oil API TC/JASO FD or better specs. (Mobil +M2T) |
| Recommended propellers | 13x8 to 15x8 (two blades) |
| Weight | 635g (without ignition and muffler) |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Ignition power DC 4.8V (4 cell NiCad or NiMh battery) * don't use higher than 4.8V., Break-in fuel oil ratio: 25:1 (4%), General use fuel: 33:1 (3%), 824g complete, , ,
Features: This is a new generation of small gas quality ...1 Reviews
HiModel
SAITO 20CC 4-STROKE GAS/PETROL ENGINE FG-20
| Type | 4-stroke |
| Displacement | 1.25 cu in (20.52cc) |
| Bore | 1.24 in (31.7mm) |
| Stroke | 1.02 in (26.0mm) |
| Cylinders | Single AAC |
| Total Weight | 30.1 oz (850 g - with muffler and ignition) |
| Engine (Only) Weight | 21.87 oz (620 g) |
| Muffler Weight | 2.89 oz (80 g) |
| Crankshaft Threads | M8 x 1.25mm |
| Prop Range | 15x7–16x6 2-blade; 14x9–15x7 3-blade |
| RPM Range | 1,800–9,500 rpm |
| Fuel | Gas oil mix of 20 |
| Mounting Dimensions | 152 x 60 x 126mm |
| Muffler Type | Cast (13mm threads) |
| Cylinder Type | AAC |
| Starting System | Saito ignition 4.8 - 6V (capacity more than 1,000mAh) |
| Carb Type | 2-needle Saito gas carburetor |
| Crank Type | Dual ball bearing |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: - Realistic exterior and exhaust sound, close to real ...HiModel
NGH 9CC PETROL ENGINE FOR RADIO CONTROL AEROPLANE GT9
| Engine Type | Gasoline Two-stroke, Air Cooled |
| Displacement (cc) | 9.07cc |
| Bore x stroke (mm) | 23.35 x 21.2 |
| Carburetor | NGH made 60G needle with pump membrane |
| Max output | 0.8HP@15000RPM |
| RPM Range | 2600-15000RPM |
| Ignition | Auto advanced Rcexl DC-CDI with special spark plug cap |
| Spark plug type | 1/4 x 32 Rcexl |
| Ignition Power | 4.8V |
| Lubrication Oil | 2 cycle engine Oil API TC/JASO FD or better specs. (Mobil + M2T) |
| Recommended propellers | 10 x 6 to 12x6 (two blades) |
| Weight | 425g (without ignition) |
, , , , , , Specifications:, , , , , , , , , , , Break-in fuel oil ratio: 20:1 (5%), General use fuel: 25:1 (4%), (Oil percentage can not less than 4%), 545g complete, , ,
Features: This is a new generation of small gas quality ...11 Reviews
HiModel
LOTUSRC T580 QUADCOPTER --AP/AV BASED ARTF - NEW PROTOCOL
, , , , , , Specifications:, , , , , , , , , , , Machine size, , 608 × 608 × 243, , mm, , ±3mm, , Expand size of the largest, , 885 × 885 × 243, , mm, , , , Motor Wheelbase, t, , Diagonal line, the two motor centers wheelbase, , 580mm, , ±3mm, , Propeller, , 1260, positive and negative special paddle, , 12”, , , , Battery, , LiPo 3S 2200mAh 20C, , 1P, , , , Single Weight, , No battery, receiver, load, , 730g, , ±10g, , Take-off weigh, , 3S 2200mAh 1P Battery, receiver, head, , 950g, , standard, , Payload, , Camera card, , ≤230g, , standard, , Maximum power pulled, , Using the standard battery 1P, , 2400g, , , , -, , Maximum payload, , Using the standard battery 1P, , ≤580g, , , , -, , Maximum takeoff weight, , Using the standard battery 1P, , 1800g, , Safety limit, , Flight distance, , Remote control device and battery capacity by the decision, , -, , , , -, , Flight Time, , 3S 2200mAh 1P Battery, receiver, , 12 minutes, , No wind hover, , Wind strength, , ≤4, , Class, , , , -, , , , ,
Features: Main features of the T580 quadcopter:1.ARTF 1)Inertial-based(6DOF IMU) self-stabilization ...5 Reviews
HiModel
DRAGONFLY NO. 35-B ELEC 3D HELICOPTER ARTF
| Fuselage overall length | 750mm |
| Total width | 320mm |
| Main rotor diameter | 630mm |
| Tail rotor diameter | 145mm |
| Motor | 380 |
| Weight without battery | 343g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: THIS IS THE DRAGONFLY #35B ALMOST READY TO FLY ...HiModel
WALKERA V120D02S MICRO 3D FLYBARLESS HELICOPTER W/DEVO 7 TX RTF
| 1). Main Rotor Diameter | 302 mm |
| 2). Tail Rotor Diameter | 85 mm |
| 3). Overall Length | 290 mm |
| 4). Weight | 80g |
| 5). Battery | 3.7V 600mAh Li-Po 20C (not included) |
| 6). ESC | WK-WST-20A |
| 7). Brushless Motor | WK-WST-15-001 |
| 8). Receiver | RX-2622V/D |
| 9). Transmitter | DEVO 7 |
| Stick mode | mode 1 and mode 2 optional, mode 2 (throttle on left hand) will be provided by default. |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: 1). Durable and strong utility professional Micro 3D helicopter. ...