Flying-Hobby
T-REX 450PRO DFC SUPER COMBO + FREE APLUS 65C LIPO
blades ..." />
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Combo Included:, ●T-REX 450 PRO DFC Kit X 1 set, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
●3GX Flybarless System X 1 set ●325D 3G Carbon blades ...Flying-Hobby
FULLSIZE SILVERLINE V-BAR V 5.3 FLYBARLESS STABILIZATION SYSTEM
| Features | Auto-Learn Function |
| Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
| http | //www.vstabi.info/en |
| http | //www.mikado-heli.com.hk/ |
V-Bar Overview:, Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (V-Bar). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!), Highlights:, Digital flight performance - like a simulator, Contents:, Full Size Silverline V-Bar, Important Information:, Support site:, Version 5.3 Pro software is available for purchase and download here:,
MIK4608 Fullsize Silverline V-Bar V 5.3 Flybarless Stabilization System The ...Flying-Hobby
SK540 3-AXIS FLYBARLESS CONTROL COMPUTER (RED ALU)
| Dimensions | 29mm x 38mm x 13mm (1.125” x 1.5″ x 0.5″) |
| Weight | 18g (0.63 ounces) |
Along with the flybarless control from the SK 720, the 540 keeps a number of functions that made the SK 720 a market leader for features in a single unit:, , Specs:, ,
Product description The SK 540 is our next-generation flybarless system, ...Flying-Hobby
MIKADO VBAR "BLUELINE" 5.2 EXPRESS
| Contents | • Full Size V-Bar |
| • Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
V-Bar Overview:, Get rid of the flybar and all its associated mechanical parts in the rotor head of your helicopter - now this entire system can be replaced by an electronic set-up, the Virtual Flybar System (“V-Bar”). By clicking very few parameters in a software module, pilots can control the flight properties of their model in a very simple and effective manner. In 3D flying, the use of the V-Bar system expands the flight envelope: Compared to conventional, mechanical, rotor heads, the V-Bar system reacts much quicker and with much more agility. It is less susceptible to unwanted effects from gusts of wind. Moreover, the undesired internal effects of a mechanical system are completely eliminated: The helicopter will respond to the input in the most exact way possible. (Note: V-Bar is not an autopilot!), Features:, • Auto-Learn Function, Highlights:, • Digital flight performance - like a simulator,
• Preset parameters for many common helicopters • Programming via ...Flying-Hobby
MIK4357 MINI V-BAR V 5.2 FLYBARLESS STABILIZATION SYSTEM
| - If using a primary receiver, Mini V-Bar is compatible with the following 2.4GHz receivers | Spektrum, Jeti, Fasst. |
| - Dimensions | 28 x 37 x 13 mm |
| - Weight | 11 g |
| Contents | - Mini V-Bar |
| - Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
Compatibility Notes:, - Mini V-Bar Blueline can, Overview:, The Mini V-Bar is the worlds smallest and lightest 3-axis virtual flybar system. It is designed to fit any small indoor helicopter. Despite its size, the Mini V-Bar is equipped with top-quality sensors and will thus satisfy the highest performance expectations. When light weight is a priority, the Mini V-Bar is your best choice. New version 5.2 Express Software allows for simplified programming and very easy flight tuning!, model helicopters with only a few limitations. Do not use the Mini V-Bar in the following types of helicopters:, - Large Scale heli's, Features:, - Programming is done via Control Panel or via USB using the PC software., Specs:, - 3-Axis Gyro System,
Aside from the nice new Blue case, the Mini V-Bar ...Flying-Hobby
AP800 DIGITAL PITCH GAUGE
| ●Detectable pitch range | -90° ~ 90°. |
| ●Detectable pitch range | ±90° |
| ●Resolution | 0.1° |
| ●Battery | 2X CR 2032 Lithium |
| ●Weight | 38g (including battery) |
Introduction:, Developed by the R&D team in Align, the new AP800 digital pitch gauge is suitable for flybar and flybarless helicopters. Auto-detecting Horizontal level , with result displayed through high contrast LCD screen, providing a simple and precise way of measuring pitch angle., Fatures:, ●Auto-detecting Horizontal level., Specification:, ●Body Dimension：108x53.9x16mm,
●Uses backlighting LCD monitor. ●Zero and Lock function. ●Automatic screen ...Flying-Hobby
T-REX 450 SPORT V2 SUPER APLUS 35C COMBO
blades X1set 3.RCE-BL35P 35A Brushless ESC X1 4.450MX ..." />
| Instructions | Preface |
| ●Length | 643mm |
| ●Height | 230mm |
| ●Main Rotor Diameter | 715mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 15T |
| ●Main Drive Gear | 150T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(with motor) | 540g |
| Focus Shot1 | Newly designed main rotor head assembly |
| Focus Shot2 | Brand new battery mount with integrated ESC mount |
| Focus Shot3 | Newly designed metal main shaft bearing block and servo mount |
| Focus Shot4 | Newly designed 4 piece upper/lower plate frame system |
| Focus Shot5 | Newly designed rudder servo mount |
| Focus Shot6 | Dedicated rudder gyro mounting platform |
| Focus Shot7 | Centripetal forces balance tail rotor holder |
| tail rotor holder Focus Shot8 | Hoop style horizontal fin mount with longer tail boom supports |
| Focus Shot9 | Newly designed landing skid for 450Sport V2 & 450Sport |
Included:, 1.T-REX 450 SPORT V2 Kit Set X1, :, ●T-Rex 450 has always been the most ideal beginner or general practicing model. Even though flybarless models have been the predominant trend, Align has not forgotten those who prefer the traditional flybar helicopters. As a result, the T-Rex 450 Sport V2 has been introduced. It is not a minor revision of the previous model, but rather a new model incorporating numerous modern design concepts. Compared to its predecessor, the Sport V2 is more precise, with better flight characteristic and controllability., ●Drive Gear Ratio: 1:10:4.24, Accessories:, ●T-REX 450 SPORT V2 Kit Set X1,
2.325D Carbon blades X1set 3.RCE-BL35P 35A Brushless ESC X1 4.450MX ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO (WITH 3GX)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
500/600 CANOPY MOUNTS (B)
Package content:, Canopy Mount set x 2, Note: When installed, Canopy Nut still need to be installed. Because when locked after bolt, canopy nut will resist bolt, so that the bolt will not fall off during flying.,
Due to vibration the original canopy mounts wear the rubbers ...Flying-Hobby
PRECISION TAIL SET PRO SE
Description:, -The Precision Tail Set PRO is an innovative design from MicroHeli in pursuit of zero slop and bind free operation solution for the T-REX. This is the results of months of research and testing from our designers to come up with a great solution for the T-REX tail. With total of 18 precision bearings in the tail system, this is absolutely the best tail system for the T-REX available on the market. It differentiates itselfs from other designs in many ways:, 1. The new design hinged type tail pitch slider offers dual support positions on both sides with dual ball bearings connections to ensure total fitness and absolute slop free connections. The tail pitch slider itself also is equipped with double precision bearings to ensure slop free and great smoothness. The brass sleeve in the tail pitch slider is done on highest precision machine with tolerance of +/- 0.001mm so that the tail pitch slider always move truely on the tail shaft. This will ensure absolute slop free in all 3 dimensions. Unlike older version which employs blue plastic horn for connection between the tail pitch slider to the tail rotor, this new design employs new CNC hinged arms to eliminate any possible bind when the tail pitch slider moves to extreme ends on each direction thanks to the new flexible arms. The new arms now no longer uses plastic ball ends to connect to the tail rotor but using two precision miniature bearings for precision control. It is a big improvement over stock design which has plastic ball end connections that can wear out over time. All the bearings we are using in this tail PRO are smallest types of bearings on the market. Over years of bearings selections, we can offer smallest precision bearings for lightest weight and great look. This advantage helps reduce the weight to minimum while maintaning superior performance and great outlook. With a fast look, it's hard to believe they are bearings included., Includes:, -1 x CNC Tail Pulley Case, Requires:, -Loctite (#242 is recommended), Weight:, 25.4 grams with all hard,
2. The bell crank in this tail system is a ...Flying-Hobby
T-REX 450 SPORT V2 SUPER COMBO
| Instructions | Preface |
| Specification | ●Length |
| ●Height | 230mm |
| ●Main Rotor Diameter | 715mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 15T |
| ●Main Drive Gear | 150T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(with motor) | 540g |
| Focus Shot1 | Newly designed main rotor head assembly |
| Focus Shot2 | Brand new battery mount with integrated ESC mount |
| Focus Shot3 | Newly designed metal main shaft bearing block and servo mount |
| Focus Shot4 | Newly designed 4 piece upper/lower plate frame system |
| Focus Shot5 | Newly designed rudder servo mount |
| Focus Shot6 | Dedicated rudder gyro mounting platform |
| Focus Shot7 | Centripetal forces balance tail rotor holder |
| tail rotor holder Focus Shot8 | Hoop style horizontal fin mount with longer tail boom supports |
| Focus Shot9 | Newly designed landing skid for 450Sport V2 & 450Sport |
:, ●T-Rex 450 has always been the most ideal beginner or general practicing model. Even though flybarless models have been the predominant trend, Align has not forgotten those who prefer the traditional flybar helicopters. As a result, the T-Rex 450 Sport V2 has been introduced. It is not a minor revision of the previous model, but rather a new model incorporating numerous modern design concepts. Compared to its predecessor, the Sport V2 is more precise, with better flight characteristic and controllability., :, ●New style CNC alloy rotor head system dramatically improve aesthetics. The new rotor head also improves flight stability and controllability., ●Drive Gear Ratio: 1:10:4.24, Accessories:, ●T-REX 450 SPORT V2 Kit Set X1,
●With the new style CNC rotor head system anodized in ...Flying-Hobby
T-REX 450PRO DFC (WITH 3GX) + FREE EXPRESS COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
Free Express Shipping ●3GX is currently the smallest and lightest ...Flying-Hobby
HELICOMMAND HC3-XTREME
| Supply voltage | 4 to 8 V |
| Max. tail rotational speed | 500°/s |
| Max. roll & pitch rotational speed | 650°/s (typical) |
| Servo frame rate | 55 Hz / 110Hz / 220 Hz selectable. |
| Tail servo output | 1,500µs / 760s selectable. |
| Maximum servo currents | Total 10A (continuous load) |
| Weight | Approx. 18g, with cable loom approx. 24g |
| Length of connecting cables to receiver | 90 mm |
| Dimension | 36 x 34 x 14mm |
Technical specifications:, Scope of supply:, - HC3-Xtreme including assembly material,
The HC3-Xtreme is a professional RIGID electronic unit and replaces ...Flying-Hobby
DIAL PITCH GAUGE
blade sizes from 300-700mm ,blade width 62mm with a ..." />
| Specification | pitch gauge |
| Dimensions | length162.0mm,width60.5mm,height18mm |
| Weight | 58g |
Instructions:, Smart design, small size, built strong for easy and reliable use.,
Supports blade sizes from 300-700mm ,blade width 62mm with a ...Flying-Hobby
EP100/200 MAIN ROTOR HUB
Suitable Mode :,
The V3 Rotor Hub. Desgin with small feathering shaft and ...