SDSHobby
LED PROGRAM CARD FOR CAR ESC
| 1.1 Size | 88mm (L) * 58mm (W) * 14mm (H) |
| 1.2 Weight | 40g. |
| 1.3 Input Voltage | 4.8-6V (If the ESC hasn't a built-in BEC, you must use an addi- |
This program card is suitable for the following ESC:, 1. XERUN series ESC (Version 1.2),
This program card is used to set the programmable parameters ...SDSHobby
RUDDER COMBO KIT FOR 26-40CC GASOLINE AIRPLANE
Including the Following Parts:,
1pcs* Glass Fiber Servo Arm----used to lengthen the arm of ...SDSHobby
ELECTRIC STARTER FOR EME55 / EME55-II / EME60 TWO STROKE GASOLINE ENGINE
| Net Weight | 540g/set |
| n Working Voltage | 11.1V |
| Available Color | red and blue (sent at random) |
| Recommended ESC | 200A (need to buy separately) |
Specification:, Equipped Brushed Motor:, Features:, The two long screws are equipped for installation of EME55 and EME60 engines., The starter can also be used for installation of DLA56, DA50 and DA60 engine after a little refitting (Note: the refitting needs to be completed by individual, and it’s suggested the consumer with hands-on capability buy this starter).,
The two short screws are equipped for installation of DLE55, ...SDSHobby
EZRUN BRUSHLESS SYSTEM(25A ESC+18T/2030 MOTOR+DIGITAL PROGRAM CARD) FOR 1/18 1/16 CAR (VERISON 2.0)
| With 3 running modes | Racing |
| Multiple protection features | Low voltage cut-off |
1/18 Ezrun Brushless ESC for Car 25A:, Output:, Continuous current 25A, burst current 90A, Input:, 4-9 cells Ni-MH/NiCd or 2-3 cells LiPo, BEC Output:, 6V/1.5A, Resistance:, 0.005 Ohm, Motor Supported:, Sensorless Brushless motor, Suitable Brushless Motor:, , With 4-6 cells Ni-MH/NiCd or 2 cells Lipo:, On-Road, With 6-9 cells Ni-MH/NiCd or 3 cells Lipo:, On-Road, Suitable Car:, 1/16 or 1/18 scale car for sportful race, Size:, , (Without wires):, 3g, 1/18 and 1/16 EZRUN-2030 Brushless Motor for Car 12T:, Turns:, 12T, KV value:, 7800KV, Diameter:, 0mm, Motor length:, 30mm, Extend shaft Diameter:, .0mm, Length of extend shaft:, 10mm, Weight:, 46g, Features for ESC:, Features for Motor:,
u ≥ 12T, Off-Road ≥ 18T; u ≥ 18T, Off-Road ...SDSHobby
EZRUN BRUSHLESS SYSTEM(18A ESC+18T/2030 MOTOR+DIGITAL PROGRAM CARD) FOR 1/18 CAR (VERISON 2.0)
| Length of extend shaft | 10mm |
| With 3 running modes | Racing |
| Multiple protection features | Low voltage cut-off |
1/18 EZRUN BRUSHLESS ESC FOR CAR 18A:, Output:, Continuous current 18A, burst current 50A, Input:, 4-9 cells Ni-MH/NiCd or 2-3 cells LiPo, BEC Output:, 6V/1A, Resistance:, 0.01 Ohm, Motor Supported:, Sensorless Brushless motor, Suitable Brushless Motor:, , With 4-6 cells Ni-MH/NiCd or 2 cells Lipo:, On-Road, With 6-9 cells Ni-MH/NiCd or 3 cells Lipo:, On-Road, Suitable Car:, 1/16 or 1/18 scale car for sportful race, Size:, 31.5mm, (Without wires):, 19g, 1/18 EZRUN-2030Brushless Motor for Car 18T:, Turns:, 18T, KV value:, 5200KV, Diameter:, 0mm, Motor length:, 30mm, Extend shaft Diameter:, .0mm, Weight:, 46g, Features for ESC:, Features for Motor:,
u ≥ 12T, Off-Road ≥ 18T; u ≥ 18T, Off-Road ...SDSHobby
EZRUN-150A-SD BRUSHLESS ESC FOR 1/5 CAR (COMPETITION RACE)
| Model | EZRUN-150A-SD Brushless ESC for 1/5 Car (Competition Race) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 150A, burst current 1080A. |
| 1.2 Input | 6-18 cells NiMH/NiCd or 2-6 cells LiPo. |
| 1.3 BEC Output | 5.75V/3A (Switch mode built-in BEC). |
| 1.4 Resistance | 0.0002 Ohm. |
| 1.5 Motor Supported | Sensorless and sensored brushless motors |
| 1.6 Suitable Brushless Motor | 6T and > 6T |
| 1.7 Suitable Car | 1/5 on-road or off-road cars / trucks for competitive race. |
| 1.8 Size | 68mm(L) * 55mm(W) * 45mm(H). |
| 1.9 Weight | 150g(Without wires) |
| 1.7 Multiple protection features | Low voltage cut-off protection / Over-heat protection |
SDSHobby
EZRUN-60A-SL BRUSHLESS ESC FOR 1/12 AND 1/10 CARS (VERSION 2.0)
| Model | EZRUN-60A-SL Brushless ESC for 1/12 and 1/10 Cars (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 60A, burst current 380A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1.5A. |
| 1.4 Resistance | 0.0007 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥5.5T, Off-Road≥8.5T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥8.5T, Off-Road≥13T; |
| 1.7 Suitable Car | 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race. |
| 1.8 Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| 1.9 Weight | 32g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and |
| .8 Multiple protection features | Low voltage cut-off protection for lithium or nickel |
1.6 Suitable Brushless Motor:,
1 Specification Features.1 Compatible with all sonsorless brushless motor..2 Use ...SDSHobby
EZRUN-35A-SL BRUSHLESS ESC FOR 1/12 AND 1/10 CARS (VERSION 2.0)
| Model | EZRUN-35A-SL Brushless ESC for 1/12 and 1/10 Cars (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 35A, burst current 190A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1.5A. |
| 1.4 Resistance | 0.0015 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥9T, Off-Road≥12T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| 1.7 Suitable Car | 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race. |
| 1.8 Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| 1.9 Weight | 30g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock |
| .8 Multiple protection features | Low voltage cut-off protection for lithium or battery /Over-heat |
1.6 Suitable Brushless Motor:,
1 Specification Features.1 Compatible with all sonsorless brushless motor..2 Use ...SDSHobby
BOSMA REFLECTION TYPE 114/900 ASTRONOMICAL TELESCOPE BIRDWATCHING VIEW
| Primary Mirror Weight | 2.7KG |
Specifications:, :, Reflection type, Primary Mirror Tube Diameter:, 114mm, Maximum Magnification:, 300, Focal Length Ratio:, F7.9, Net Weight:, 10kg, Bracket Type:, equatorial instrument, Primary Mirror Tube Length:, 110mm, Focal Length:, 900mm, Resolution Ratio:, 1.02inch, Features:, , Includes:,
Optical System Classic Newton reflected type structure Large diameter, focusing ...SDSHobby
EZRUN-25A-SL-L BRUSHLESS ESC FOR 1/18 CAR (VERSION 2.0)
| Model | EZRUN-25A-SL-L Brushless ESC for 1/18 Car (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 25A, burst current 90A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1.5A. |
| 1.4 Resistance | 0.005 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥18T, Off-Road≥24T; |
| 1.7 Suitable Car | 1/16, 1/18 on-road or off-road cars / trucks for normal race or sportful race. |
| 1.8 Size | 31.5mm(L) * 27.5mm(W) * 16mm(H). |
| 1.9 Weight | 23g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock Crawler mode. |
1.6 Suitable Brushless Motor:, .8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.,
Preview 1 Specification Features .1 Compatible with all sonsorless brushless ...SDSHobby
EZRUN-25A-SL-H BRUSHLESS ESC FOR 1/12 AND 1/10 CARS (VERSION 2.0)
| Model | EZRUN-25A-SL-H Brushless ESC for 1/12 and 1/10 Cars (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 25A, burst current 90A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1.5A. |
| 1.4 Resistance | 0.005 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥12T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥18T; |
| 1.7 Suitable Car | RTR application for 1/12, 1/10 on-road cars |
| 1.8 Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| 1.9 Weight | 30g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock Crawler mode. |
1.6 Suitable Brushless Motor:, .8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.,
Preview EZRUN-25A-SL-L is specially designed for RTR application of 1/12 ...SDSHobby
EZRUN-18A-SL BRUSHLESS ESC FOR 1/18 CAR (VERSION 2.0)
| Model | EZRUN-18A-SL Brushless ESC for 1/18 Car (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 18A, burst current 50A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1A. |
| 1.4 Resistance | 0.01 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥18T, Off-Road≥24T; |
| 1.7 Suitable Car | 1/18 on-road or off-road cars / trucks for normal race or sportful race. |
| 1.8 Size | 31.5mm(L) * 24mm(W) * 15mm(H). |
| 1.9 Weight | 19g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock Crawler mode. |
1.6 Suitable Brushless Motor:, .8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.,
Preview 1 Specification Features .1 Compatible with all sonsorless brushless ...SDSHobby
FLASHER 450 PRO CF CARBON FIBER HELICOPTER KIT
| Length | 635mm |
| Height | 230mm |
| Main Blade Length | 325mm |
| Main Rotor Diameter | 710mm |
| Tail Rotor Diameter | 158mm |
| Motor Pinion Gear | 13T |
| Main Drive Gear | 150T |
| Autorotation Tail Drive Gear | 106T |
| Tail Drive Gear | 25T |
| Weight (w/o main blade) | 450g |
| Flying Weight | approx 780g |
Specifications:, Drive Gear Ration: 1: 11.5: 4.24, Equipments Required for RTF (need to buy separately):, 6-channel or more transmitter, helicopter system, Package Components:, Flasher 450 Pro set x1, Features:, Newly designed head block with high rigidity and stability.,
6-channel or more receiver 11.1V 3S 2000-2200mAh LiPo Battery Metal ...Hobby-Lobby
ULTRA MICRO P-51D MUSTANG RTF WITH AS3X
| Wingspan | 16.2 in (410mm) |
| Overall Length | 14.1 in (357mm) |
| Flying Weight | 1.5 oz (43 g) |
| Radio | 4-channel transmitter (included) |
| CG (Center of Gravity) | 1.38 in (35mm) behind the leading edge at wing root |
| Prop Size | 100 x 100mm 4-blade propeller |
| Recommended Motor Battery | 3.7V 1S 150mAh LiPo (included) |
| Charger | AC/DC 3.7V LiPo charger (included) |
| Plane Type | Scale Military |
| Experience Level | Intermediate |
| Power Plant Size | Micro Electric |
| Recommended Environment | Indoor/Outdoor |
| Fuel Type | Electric |
Key Features:, ParkZone® DSM2®/DSMX® receiver/ESC/AS3X® unit, installed, Needed To Complete:, Nothing! Everything you need to get flying is included in the box. You can have this Ready-To-Fly version flying in the time it takes to charge the battery., Technical Specifications:, Flaps: No, Retracts: No, Is Assembly Required: No,
Flies like it's on rails If you're looking for the ...Hobby-Lobby
ULTRA MICRO P-51D MUSTANG BNF WITH AS3X
| Wingspan | 16.2 in (410mm) |
| Overall Length | 14.1 in (357mm) |
| Flying Weight | 1.5 oz (43 g) |
| Radio | 4+ channel DSM2/DSMX transmitter required |
| CG (Center of Gravity) | 1.38 in (35mm) behind the leading edge at wing root |
| Prop Size | 100 x 100mm 4-blade propeller |
| Recommended Motor Battery | 3.7V 1S 150mAh LiPo (included) |
| Charger | AC/DC 3.7V LiPo charger (included) |
| Plane Type | Scale Military |
| Experience Level | Intermediate |
| Power Plant Size | Micro Electric |
| Recommended Environment | Indoor/Outdoor |
| Fuel Type | Electric |
Key Features:, ParkZone® DSM2®/DSMX® receiver/ESC/AS3X® unit, installed, Needed To Complete:, A 4+ channel DSM2- or DSMX-compatible transmitter., Technical Specifications:, Flaps: No, Retracts: No, Is Assembly Required: No,
Flies like it's on rails If you're looking for the ...