Flying-Hobby
ROTORTECH 92MM LUMINOUS CARBON FIBER NIGHT TAIL BLADES
| Length | 92mm |
| Width | 30mm |
| Root/Grip | >= 5mm |
| Weight | 6.6g |
| Bolt hole | 3mm |
Features:, , Specifications:, , Includes:, , Instruction Sheet:,
Product description Carbon fiber tail blades. Uses LED type lights. ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO + FREE APLUS 65C LIPO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Combo Included:, ●T-REX 450 PRO DFC Kit X 1 set, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
●3GX Flybarless System X 1 set ●325D 3G Carbon blades ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO (WITH 3GX) + 4 RJX FBL BLADES
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., (3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
T-REX 450PRO DFC Super Combo (With 3GX) 1 RCE-BL35P 35A ...Flying-Hobby
T-REX 450PRO DFC SUPER COMBO (WITH 3GX)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
T-REX 450PRO DFC (WITH 3GX) + FREE EXPRESS COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| Instructions | (T-REX 450PRO DFC) |
| Specification | (T-REX 450PRO DFC) |
| ●Length | 640mm |
| ●Height | 204mm |
| ●Main Rotor Diameter | 710mm |
| ●Tail Rotor Diameter | 158mm |
| ●Motor Drive Gear | 12T |
| ●Main Drive Gear | 121T |
| ●Autorotation Tail Drive Gear | 106T |
| ●Tail Drive Gear | 25T |
| ●Weight(w/o power system) | 513g |
| ●Flying Weight | Approx. 638g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Features:, ● Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO DFC Kit X 1 set, Radio transmitter and electronic equipment required for assembly:, 1.Transmitter(6-channel or more,helicopter system),
Free Express Shipping ●3GX is currently the smallest and lightest ...Flying-Hobby
HELICOMMAND HC3-XTREME
| Supply voltage | 4 to 8 V |
| Max. tail rotational speed | 500°/s |
| Max. roll & pitch rotational speed | 650°/s (typical) |
| Servo frame rate | 55 Hz / 110Hz / 220 Hz selectable. |
| Tail servo output | 1,500µs / 760s selectable. |
| Maximum servo currents | Total 10A (continuous load) |
| Weight | Approx. 18g, with cable loom approx. 24g |
| Length of connecting cables to receiver | 90 mm |
| Dimension | 36 x 34 x 14mm |
Technical specifications:, Scope of supply:, - HC3-Xtreme including assembly material,
The HC3-Xtreme is a professional RIGID electronic unit and replaces ...Flying-Hobby
TREX 700 MAGNETIC CANOPY MOUNTING SET (BLUE)
Product Detail :, Ultra Quick Fit / Release Magnetic canopy mounting system for the T-Rex 700,
NITRO This new canopy mounting system uses ultra powerful Neodymium ...Flying-Hobby
TREX 700 MAGNETIC CANOPY MOUNTING SET (SLIVER)
Product Detail :, Ultra Quick Fit / Release Magnetic canopy mounting system for the T-Rex 700,
NITRO This new canopy mounting system uses ultra powerful Neodymium ...Flying-Hobby
TREX 700 MAGNETIC CANOPY MOUNTING SET (RED)
Product Detail :, Ultra Quick Fit / Release Magnetic canopy mounting system for the T-Rex 700,
NITRO This new canopy mounting system uses ultra powerful Neodymium ...Flying-Hobby
TREX 600 E CANOPY MAG MOUNTING SET (RED)
Product Detail :, Ultra Quick Fit / Release Magnetic canopy mounting system for the Trex 600,
Electric This new canopy mounting system uses ultra powerful Neodymium ...Flying-Hobby
TREX 600 E CANOPY MAG MOUNTING SET (SLIVER)
Product Detail :, Ultra Quick Fit / Release Magnetic canopy mounting system for the Trex 600,
Electric This new canopy mounting system uses ultra powerful Neodymium ...HobbyKing
JR MPH83TWV LINEAR HALL SENSING WIDE VOLTAGE BRUSHLESS SERVO WITH METAL GEARS AND HEATSINK
| Weight | 73g |
| Voltage | 4.5~8.5v |
| Dimensions | 39 x 21 x 40.5mm |
Specs:, Torque:, 26.3(4.8V)/40.6(7.4V)kg.cm, Speed:, 0.19(4.8V)/0.13(7.4V)sec/60°, About Servos Manufactured by JR Propo:, If used on a large control surface - typically aileron, rudder, elevator or flap on an Airplane. Digital Servos (DS / MP / MPH series) may move slightly around centre while on the ground, this is normal and will not occur in flight.,
The MPH83TWV is a very impressive servo, extreme torque and ...ReadyMadeRC
GOPRO-HOUSING "SNAP" V2.0 FOR GOPRO HD2 - WHITE
| Weight of the housing alone | 23 grams |
| Disclaimer | I suggest clipping off one side of the |
Most important changes:, - Screw-mechanism instead of the snapping mechanism (details see below), All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With version 1 there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the, A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
"Snap" is a GoPro-housing, which offers a perfect protection of ...ReadyMadeRC
GOPRO-HOUSING "SNAP" V2.0 FOR GOPRO HD2 - BLACK
| Weight of the housing alone | 23 grams |
| Disclaimer | I suggest clipping off one side of the |
Most important changes:, - Screw-mechanism instead of the snapping mechanism (details see below), All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With version 1 there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the widely available replacement lenses (for the skeleton-housing). It does not need to be glued in, but instead is being hold perfectly tight by 3 nylon screws. This way the lens can be used in different front-plates and/or housings., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the, A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
"Snap" is a GoPro-housing, which offers a perfect protection of ...ReadyMadeRC
GOPRO-"SNAP" HOUSING FOR GOPRO HERO3 - BLACK
| Weight of the housing includingg screws and lens protection | 30 grams |
| Disclaimer | I suggest clipping off one side of the nut a bit, so there won't be any part of it that would |
All functions together:, , Screw-Mechanism for a complete protection and a stable mounting:, With the first hero1&2-version there was a snapping mechanism which was also responsible for the name. The mechanism was very easy to use, but has proven to be not as secure as i wanted it to be. There have been crashes reported where the front plate just flew off, which drastically reduces the safety of your GoPro. The search was long for the best mounting option, but finally a screwing solution has proven to be best. By using specially designed knurled screws, the GoPro can be removed just as easy on the field as with the snapping mechanism, and no tools are needed. There is no open side, which means the GoPro is completely safe inside and can't fall out. Also you do not need any rubber or zip-tie to close it., :, The housing comes with everything you need to install one of the 2 lens-options. It does not need to be glued in, but instead is being hold perfectly tight by 3 polyamide screws., :, By using 3 countersunk screws and some of the multiple mounting holes, the housing can be mounted very flexible on almost anything., :, "Snap" can be easily installed/uninstalled on the Eyefly frames. This way you can quickly change between different cameras if needed., The special thing: The GoPro can be mounted, so that the lens indeed is really in the middle of the frame, not "a bit" tending to one side (which looks stupid on video)., :, The front-plate allows the usage of different front-plates for different use-cases. The front-plate included in the standard housing is made for installing just the GoPro and nothing else. By using the "duo"-adapter, also available in the shop, you can mount a CCD-cam in addition to the GoPro without an issue., A short mounting manual::, 1) Put together "dry", without glueing, to make sure you've got everything right (including GoPro!),
This GoPro-housing offers a perfect protection of your GoPro against ...