HiModel
72MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER
| MODEL NO. | WFT09H |
| MODULATION | FM(PPM) and PCM |
| OUTPUT POWER | ≤700mW |
| POWER SUPPLY | 1.2V x 8 (9.6V) |
| CURRENT DRAIN | 200mA |
| Band | 72MHz |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., , ,
Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...HiModel
35MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER
| MODEL NO. | WFT09H |
| MODULATION | FM(PPM) and PCM |
| OUTPUT POWER | ≤700mW |
| POWER SUPPLY | 1.2V x 8 (9.6V) |
| CURRENT DRAIN | 200mA |
| Band | 35MHz |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., , ,
Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...4 Reviews
HiModel
40MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER
| MODEL NO. | WFT09H |
| MODULATION | FM(PPM) and PCM |
| OUTPUT POWER | ≤700mW |
| POWER SUPPLY | 1.2V x 8 (9.6V) |
| CURRENT DRAIN | 200mA |
| Band | 40MHz |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., , ,
Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...HiModel
FRSKY SERVO CHANNEL CHANGER FOR SBUS SERVOS & SBUS TO PWM DECODER
| Dimensions | 48 x 67 x 22mm |
| Weight | 6.7g |
| Operating Temperature Range | -10-45 ℃ |
| Operating Voltage | 3-16V |
| Compatibility for Servo Connection Port | FrSky SBUS & CPPM compatible servo, Futaba S.BUS servo, FrSky SBUS Decoder |
, , , , , , Specifications:, , , , , , , , , , , FrSky Servo Channel Changer for SBUS Servos & SBUS to PWM Decoder, , ,
Features: This product is a tool for setting the channel ...HiModel
HIMODEL 2200MAH 11.1V LITHIUM POLYMER (TX) BATTERY FOR TRANSMITTERS - FLAT
| Size | 100x45x13.5 mm |
| Weight | 124g / 4.38 oz |
| Capacity | 2200mAh |
| Voltage | 11.1V |
| Connector | FUTABA AND JR standard |
, , , , , , Specifications:, , , , , , , , , , , HiModel 2200mAh 11.1V Lithium Polymer (TX) Battery for Transmitters, , ,
Features: Specially designed to use as replacement of TX Ni-Mh/Ni-Cd ...5 Reviews
HiModel
HIMODEL 2200MAH 11.1V LITHIUM POLYMER (TX) BATTERY FOR TRANSMITTERS
| Size | 95x30x18mm |
| Weight | 114g / 4.03 oz |
| Capacity | 2200mAh |
| Voltage | 11.1V |
| Connector | FUTABA AND JR standard |
, , , , , , Specifications:, , , , , , , , , , , HiModel 2000mAh 11.1V 15C Lithium Polymer (TX) Battery for Transmitters, , ,
Features: Specially designed to use as replacement of TX Ni-Mh/Ni-Cd ...2 Reviews
HiModel
MINI USB SIMULATOR INTERFACE CABLE
| ●Supporting system | Windows ME, Windows 2000, Windows XP. |
| http | //n.ethz.ch/student/mmoeller/fms/index_e.html |
, , , , , , Specifications:, , , , , , , , , , , ●Plug and Play., ●USB 1.1/ USB 2.0 Compatible., ●USB interface unit features connectors compatible with most Futaba and JR transmitters., Visit FMS website at, to download simulator software at free of charge, then plug & play., , ,
Features: This is the latest mini size USB type simulator. ...4 Reviews
HiModel
MINI USB SIMULATOR INTERFACE CABLE SIM X12
| http | //n.ethz.ch/student/mmoeller/fms/index_e.html |
Specifications:, ●USB interface unit features connectors compatible with most Futaba and JR transmitters., Visit FMS website at, to download simulator software at free of charge, then plug & play., * Simulator software is NOT included, this is the USB interface with conversion cables only., ,
Features: This is the mini size USB type simulator. The ...HiModel
3.5-7V RX BATTERY VOLTAGE LEVEL LED INDICATOR
| Wire length | 28cm |
| Working voltage | 3.5 to 7V (typically for 4.8V or 6V RX battery) |
| Connector type | Futaba/JR compatible |
| 5V above | green LED |
| 5-4.5V | Green , flash slowly |
| 4.5-4V | Red LED |
| Below 4V | Red LED, quick flash |
, , , , , , Specifications:, , , , , , , , , , , 3.5-7V RX Battery Voltage Level Indicator, Weight: 4g, Working current: , Status:, * This unit can only work under 7V, and can not connect directly to 2S Lipo., , ,
HiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
| ● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
| ● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
| ● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
FY-91Q MULTI-ROTOR FLIGHT STABILIZATION & AUTOPILOT SYSTEM
, , , , , , Specifications:, , , , , , , , , , , FY-91Q Module, Operating voltage ：4.0~6.0 Volt, Current consumption ：50mA (5V input), Dimensions ：55 x 33 x 20 mm, Weight (not including wires) ：20g, Operating Temperature ：-25°C~ +70°C, The maximum allowable rotation rate ： 3 rotations per minute, APPLICABLE AIRCRAFTMODELS, The FY91Q can be installed and flown it the following multi-rotor aircraft:, - 4 motored quadcopters;, - Tri-axial rotory aircraft with 6 motors, - Six-axial multi-rotor aircraft (6 motors), REMOTE CONTROL SYSTEM COMPATIBILITY, FY-91Q have been tested to work with the following RC systems:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, · Graupner/JR PPM 8, PPM 12, SPCM mode；, · MPX PPM8, PPM 12 with UNI mode, · Any remote control system using the standard of 1.5 ms neutral position., , ,
Features: THIS IS FY91Q MODULE ONLY, THE GPS & COMPASS ...HiModel
HOBBYWING HEAD LOCK AVCS GYRO G3
| 1 Input | 4.5-6.5V, operating current = 50mA, maximum current |
| 2 Size | 26mm*24mm*9mm |
| 3 Weight | 12g |
| Analog Servos (frequency 50Hz), servo neutral point | 1520us |
| Digital Servos (frequency 333Hz), servo neutral point | 1520us |
| Note | This gyro is not compatible with following servos |
, , , , , , Specifications:, , , , , , , , , , , Specification, 4 Suitable Servo:, Futaba- S9251, S9256, BLS251, JR-2700G, 8700G, 810G, 5 Accessories:, 2 pieces of adhesive foam pads, 1 piece of steel plate for vibration isolation, , ,
Features: 1 Dual working modes: Normal mode and Head-lock mode, ...HiModel
UNIVERSAL FIBERGLASS DUAL-SHAFT DAMPING AERIAL TILT T8 (SUIT FOR CAMERA GOPRO)
| Material | Fiberglass + metal |
| Mounting tube diameter | 8mm (suit for 8mm tube) |
| Weight | 60g (excluding servo) |
| Moving direction | 2 axis |
| Servo requirement (not included) | 1 x standard size servo(like Futaba 3001, 3003 etc), 1 x 9g mini servo |
, , , , , , Specifications:, , , , , , , , , , , Universal Dual-shaft Damping Aerial Tilt T8 (suit for Camera Gopro), * Not assembled, come in loose parts), , ,
Features: Suit for car cameras like Gopro etc.HiModel
VOYAGER UNIVERSAL FIBERGLASS DUAL SHOCK ABSORBING AERIAL GIMBLE (SUIT FOR GOPRO ETC.)
| Material | Fiberglass |
| Mounting tube diameter | 8mm (suit for 8mm tube) |
| Weight | 166g (excluding servo) |
| Servo requirement (not included) | 1 x standard size servo(like Futaba 3001, 3003 etc), 1 x 9g mini servo |
, , , , , , Specifications:, , , , , , , , , , , VOYAGER Universal Fiberglass Dual Shock Absorbing Aerial Gimble (suit for Gopro etc.), * Not assembled, come in loose parts), * Servos are NOT included., , ,
Features: Suit for car cameras like Gopro etc. Dual shock ...HiModel
UNIVERSAL TWO-AXLE STABILITY AUGMENTATION AERIAL TILT FOR CAMERA UP TO 1KG V2
| Type | Univerdal Two-axle Aerial Pan & Tilt for Camera up to 1KG |
| Structure | 2mm fiberglass and metal |
| Weight | 110g (excluding servos) |
| Stability augmentation | 2 axles |
| Camera shutter control | Yes, standard 9g servo (servo not included) |
, , , , , , Specifications:, , , , , , , , , , , Suggested servo: standard analog servo like Futaba 3003/3001. (Digital servo has a larger noise and may affect audio recording), , ,
Features: -Suit for most small cameras with standard mount screw ...