GetFPV
READY TO FLY QAV500 (RTF)
NOTE: This build does not include Lipos and charger. We recommend 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV500 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 9 minutes hover with 2200mah 4s nanotech |
| Body | G10 |
| Booms | Anodized machined Aluminum |
| Suggested Props | Graupner 8" E-Props |
| Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV500 (RTF)
NOTE: This build does not include Lipos and charger. We recommend 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV500 FPV Quadcopter frame. ...GetFPV
READY TO FLY QAV400 (RTF)
NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,
Details This is a fully built QAV400 FPV Quadcopter frame. ...GetFPV
QAV400 FPV QUADCOPTER FRAME (PRE-ORDER)
| Weight | 375g (without landing gear) |
| AUW | 1165g with 2200mah 4s nanotech lipo, gopro3, flight cam, TX, and CC3D board |
| Flight Time | 9 minutes hover with 2200mah 4s nanotech |
| Body | G10 |
| Booms | Anodized machined Aluminum |
| Suggested Props | Graupner 8" E-Props |
| Motor Choice | Tiger Motor |
Power: Like the QAV500, the QAV400 comes with a power distribution board to solder the ESCs to as well as FPV electronics to, Suggested Lipo: 4s 2200mah up to 3300mah. HobbyKing NanoTech Lipos in these sizes fit the frame well in terms of dimensions. Max Lipo Dimensions: W: 54mm, H: 35mm, L: 150mm, Suggested ESC:, Tiger Motor 18amp ESC,
Details The new QAV400 FPV Quadcopter is nimble acrobat that ...GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
QAV500 BRUSHLESS GIMBAL UPGRADE (PRE-ORDER)
| 10" Props that generate a maximum of lift. Recommended props | APC 10x4.7 |
| Motors | We recommend the |
| ESCs | We recommend the |
Gimbal Control Board:, We recommend the AlexMos board., Props:, Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro protection:, The QAV540G gimbal that is part of this upgrade requires the GoPro to be placed into the gimbal without the GoPro case. We recommend you buy a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,
Details Turn your existing QAV500 quad into an airframe with ...GetFPV
QAV540G BRUSHLESS GIMBAL AIRFRAME (PRE-ORDER)
| Props | 11" props such as |
| Motors | We recommend the |
| ESCs | We recommend the |
Landing Gear:, You can choose between the, Gimbal Control Board:, We recommend the AlexMos board., Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro Lens Protection:, The QAV540G gimbal requires the GoPro to be placed into the gimbal without the GoPro case. We recommend a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,
Details The QAV540G is a high quality quad airframe that ...GetFPV
NX4008 620KV MULTI-ROTOR MOTOR
| Weight (with cables) | 87g |
| Suitable Props | 9, 10, 11, 12 x 4.5, 4.7, 5 |
| Most Efficient Prop Size | 10x4.7 or 10x5 |
| ESC | 18amp or higher |
| Lipo | 3s or 4s |
| Shaft Diameter | 3mm |
| Prop Adapter Diameter | 5mm |
| Cable Length | 320mm |
| Cable Gauge | 20AWG |
| Stator | 40mm |
| Diameter | 45mm |
| Mounting Holes | 2 sets of 3 Triangularly positioned holes. Large triangle |
KV: 620kv, Suitable Mounting Screw: 6mm M2.5 (for QAV500), 20mm M2.5 (for Pro Tricopter Kit). Button-head, socket screw, or phillips head.,
Details The fpvmanuals NX-4008 is an upgraded version of the ...GetFPV
IBCRAZY 5.8GHZ BLUBEAM WHIP
| Contains TWO antennas | 3 lobe TX, and 4 lobe RX |
| Max speeds without significant deflection | 150mph |
| Connector type | SMA male |
| Whip length | 2″/5cm |
GetFPV
IBCRAZY 5.8GHZ BLUBEAM WHIP WITH 90 DEGREE SMA
| Contains TWO antennas | 3 lobe TX, and 4 lobe RX |
| Max speeds without significant deflection | 150 mph |
| Connector type | SMA male |
| Whip length | 2″/5cm |