HobbyKing
CNC RUDDER 3 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 101g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 71g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 3.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 5.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 3.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 4.0 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 3 TRAY 4.5 INCH (#4-40) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 100g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 4.0 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
CNC RUDDER 1 TRAY 4.5 INCH (M3) BLACK
| Shoring | 2 Bearing Insert |
| Servo | HITEC, FUTABA, JR |
| Weight | 70g |
| Shoring, Arm | Titanium Silver |
| Tray | The resulting black anodized finish rework is a classy two-tone image |
HobbyKing
TURNIGY 2 IN 1 POWER METER/SERVO METER 1.5 TFT
| Servo meter input CH1 | 8.4V/10A max |
| Power meter input CH2 | 60V/100A max |
| Display | 1.5" TFT |
| Dimensions | 58x45x9mm |
| Weight | 41g |
This device has two channels:, Channel 1 is designed for use with servos and can handle up to 8.4V/10A. It features JR style plug connections allowing you to easily connect your servos directly to the meter. This is very useful for determining if your ESC's BEC can handle your model's servos., Features:, • Accurate voltage/amperage/wattage measurement, Specs:, *Note:, User manual available for download located under the "Files" tab below,
The Turnigy 2 in 1 Power Meter/Servo Meter is a ...5 Reviews
HobbyKing
TURNIGY DLUX 10A (10~60V) HV SBEC
| Adjustable Low Voltage Alarm | 10~60V |
| Input | bare leads / Output |
| Dimensions | 15.7 x 31 x 54mm |
| Weight | 45g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Input Voltage:, 3~14S Lipoly (10~60V), Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A HV switching BEC provides up to ...5 Reviews
HobbyKing
TURNIGY 1800MAH 2S 12C LIPO RECEIVER PACK
| Minimum Capacity | 1800mAh |
| Configuration | 2S1P / 7.4v / 2Cell |
| Constant Discharge | 12C |
| Pack Weight | 101g |
| Pack Size | 78 x 45 x 15mm |
| Charge Plug | JST-XH |
| Discharge Plug | JR style |
5 Reviews
HobbyKing
TURNIGY 3600MAH 2S 12C LIPO RECEIVER PACK
| Configuration | 2S1P / 7.4v / 2Cell |
| Constant Discharge | 12C |
| Pack Weight | 186g |
| Pack Size | 77 x 45 x 27.5mm |
| Charge Plug | JST-XH |
| Discharge Plug | JR style |
Minimum Capacity:, 3600mAh (True 100% Capacity),
The number one in performance, value and price! The new ...5 Reviews
HobbyKing
TURNIGY DLUX 10A LINEAR VOLTAGE REGULATOR (5.2~7.4V OUTPUT)
| Input Voltage | 2S Lipoly (6~8.4V) |
| Adjustable Low Voltage Alarm | 6.6~7.4V |
| Input | JST plug / Output |
| Dimensions | 55 x 31.5 x 14mm |
| Weight | 35g |
Features:, • Stable, reliable power supply for your servos/receiver, Specs:, Output Voltage:, 5.2V/6.0V/6.8V/7.4V/8.4V selectable, Output Current:, 10A @ 6V continuous (15A @ 6V peak), Switch Type:, Fail Safe (fail safe on) pin-flag contactless type, Power Connector:,
The Turnigy dlux 10A linear voltage regulator provides up to ...5 Reviews