HobbyKing
POWERBOX COMPETITION SRS W/ SENSOR SWITCH
| • SRS | Serial Receiver System that uses receivers with serial interface |
SRS stands for Serial Receiver System: in contrast to conventional battery backer systems, servo information is transferred using a digital serial signal generated by the receiver. This reduces the number of connections required between the receiver and the PowerBox to a single cable. It is also easy to connect a second receiver to the system, which then assumes control of the model if the first receiver should fail to pick up a signal. In the case of Spektrum and Jeti, only the satellite receivers are connected to the Competition SRS., However, servo-matching also allows functions to be linked, avoiding the need for two channels at the transmitter. As an example: the left and right landing flaps can be operated using just one transmitter channel, as the direction of rotation and the servo end-points are adjusted at the Competition., Operating voltage:, Power source:, Current drain:, Max. receiver and servo current:, Servo signal resolution:, Signal frame rate:, Screen:, Bus systems:, Servo sockets:, Temperature range:, Dimensions:, Weight:, SensorSwitch:, EMV approval:, CE approval:,
The PowerBox Competition SRS is the first device in an ...HobbyKing
BMS-620MG HIGH TORQUE SERVO (METAL GEAR) 9.1KG / .15SEC / 50G
| Weight | 50 grams / 1.78 oz |
| Dimensions | 40.5 x 20 x 42 mm / 1.60 x 0.78 x 1.62 inch |
| Torque At 4.8V | 9.1kg-cm , 126 oz-in |
| Torque At 6.0V | 10.6kg-cm , 144 oz-in |
| Speed At 4.8V | 0.15sec / 60 deg at no load |
| Speed At 6.0V | 0.13sec / 60 deg at no load |
5 Reviews
HobbyKing
BMS-375DD DIGITAL SERVO 1.6KG / .11SEC / 9.6G
| Weight | 9.6 grams / 0.38oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.6kg/cm , 22 oz/in |
| Speed At 4.8V | 0.11sec / 60 deg at no load |
5 Reviews
HobbyKing
BMS-136 RETRACT SERVO 6.1KG / .31SEC / 28G
| Weight | 28 grams / 0.99oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 6.1kg-cm , 85 oz-in |
| Speed At 4.8V | 0.31 sec / 60 deg at no load |
5 Reviews
HobbyKing
BMS-830DMG+HS HIGH PERFORMANCE DIGITAL SERVO (METAL GEAR) 11.6KG / .12SEC / 58G
| Weight | 58g / 2.04oz |
| Dimensions | 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 inch |
| Torque At 4.8V | 11.6kg/cm , 152 oz/in |
| Torque At 6.0V | 13kg/cm , 181 oz/in |
| Speed At 4.8V | 0.12 sec / 60° at no load |
| Speed At 6.0V | 0.10 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-705 LOW PROFILE HIGH TORQUE SERVO 6.0KG / .18SEC / 28G
| Weight | 28g / 0.99oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 6.0kg/cm , 83 oz/in |
| Speed At 4.8V | 0.18 sec / 60° at no load |
5 Reviews
HobbyKing
HOBBYKING PPM SIGNAL MIXER VERSION B FOR HEAD-MOVEMENT-TRACKER GYRO
| Note | Only works with Futaba transmitters. |
| Voltage Supply | 8V-12V |
Weight: 4g,
PPM Signal Mixer is specifically designed for those who own ...5 Reviews
HobbyKing
FUTABA CHARGER 230V FOR TX & RX HBC-2C (4)
| Battery type | Ni-xx |
| Output-Transmitter | 7.2V DC, 170ma |
| Receiver | 4.8V DC, 150ma |
: 230V AC 50Hz 7W, : 373g,
Futaba 220 Volt AC overnight battery charger Charges transmitter and ...5 Reviews
HobbyKing
BMS-761DD LOW PROFILE DIGITAL SERVO 4.4KG / .13SEC / 26G
| Weight | 26g / 0.92oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 4.4kg/cm , 62 oz/in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-660MG+HS SUPER STRONG SERVO 12.6KG / .20SEC / 51.3G
| Weight | 51.3 grams / 1.84 oz |
| Dimensions | 40.5 x 20 x 42.5 mm / 1.60 x 0.78 x 1.64 inch |
| Torque At 4.8V | 12.6kg-cm , 181 oz-in |
| Torque At 6.0V | 14.2kg-cm , 195 oz |
| Speed At 4.8V | 0.20 sec / 60° at no load |
| Speed At 6.0V | 0.17 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-373 MICRO SERVO 1.5KG / .13SEC / 9.2G
| Weight | 9.2 grams / 0.34oz |
| Dimensions | 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch |
| Torque At 4.8V | 1.5kg/cm , 22 oz/in |
| Speed At 4.8V | 0.13sec / 60 deg at no load |
5 Reviews
HobbyKing
BA NANO GYRO 2.3GRAM
: 23mmX16mmX5mm (0.9inX0.63inX0.20in), : 2.3gi0.08ozjwith all the signal wires and JST connector, : 4.5V ~ 6.0V, : 10mA (4.5V), : Green/Red to show that status of gyro setting, : Bicolor LED, setup adjustment and single rate gain adjustment., : piezo sensor, : 50Hz, :-5? ~ 75?,
Dimension Weight 2.8gi0.10ozjwith all the signal wires and JR connector ...5 Reviews
HobbyKing
BMS-621 HIGH SPEED SERVO 6.4KG / .13SEC / 41G
| Weight | 41grams / 1.45oz |
| Dimensions | 40.5 x 20 x 38.5 mm / 1.60 x 0.78 x 1.54 inch |
| Torque At 4.8V | 6.4kg-cm , 89 oz-in |
| Torque At 6.0V | 7.2kg-cm , 109 oz-in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
| Speed At 6.0V | 0.10 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-705MG LOW PROFILE HIGH TORQUE SERVO (METAL GEAR) 6.0KG / .18SEC / 34G
| Weight | 34g / 1.19oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 6.0kg/cm , 83 oz/in |
| Torque At 6.0V | 7.4kg/cm , 112 oz/in |
| Speed At 4.8V | 0.18 sec / 60° at no load |
| Speed At 6.0V | 0.16sec / 60° at no load |
5 Reviews
HobbyKing
POLYQUEST 1350MAH 2S1P RECEIVER PACK
| Capacity | 1350mAh |
| Voltage | 7.4v |
| Constant discharge | 6-10C |
| Burst discharge | N/A |
| Weight | 70g |
| Size | 75x36x15mm |
5 Reviews