DPCAV
SUPER HIGH TORQUE SERVO, METAL GEARS
Servo dimensions (Refer to the drawing at end of page):,
This giant-sized analog servo has more than 450 oz-in (33 ...DPCAV
HIGH TORQUE SERVO, METAL GEARS
Servo dimensions (refer to the drawing at end of page):,
This analog servo has more than 200 oz-in (33 kg-cm) ...DPCAV
MINI FPV SERVO WITH 180°-260° TRAVEL, 12G
| Full travel pulse range | 0.9mS - 2.1mS |
Specifications:, ,
Affordable FPV servo allows up to 260° travel. Specifically designed ...DPCAV
9 GRAM R/C HOBBY SERVO
| Note | Servo styles, colors, and arm hardware may vary. |
| Supply voltage | 4.8V - 6V |
| Speed | 0.12sec, Torque |
| Cable length | 125mm |
| Dimensions (L x W x H) | Approximately 23 x 27 x 11 mm (may vary slightly). |
| Weight | ~9 grams, not including cable. |
General Specs:, ,
Generic (OEM) brand mini sized R/C hobby servo. It is ...DPCAV
SERVO CONNECTOR LOCK
| pieces in assorted colors | red, blue, green, and yellow. |
DPCAV
MALE TO MALE (PLUG-PLUG) SERVO CABLE
,
Male-to-Male servo style cable. For use with FPV and common ...DPCAV
POWER CORD WITH 2.1MM BARREL PLUG
,
This 2-conductor power cord is equipped with a 2.1mm (I.D.) ...DPCAV
GOPROHD HERO/HERO2 CAMERA CABLE, AUDIO & VIDEO
| Yellow | Audio (mono) |
| Orange | Video |
| Red | Not Used |
| Brown | Ground |
The wire color codes are as follows:, ,
This lightweight A/V (audio/video) cable is used to connect the ...DPCAV
GOPROHD HERO/HERO2 CAMERA CABLE, VIDEO ONLY
| Orange | Video |
| Red | Not Used |
| Brown | Ground |
The wire color codes are as follows:, ,
This lightweight video cable is used to connect the popular ...DPCAV
R/C CONTROLLED TRIPLE CAMERA SWITCH (3-WAY)
| Video Switch | Solid State 3-position Relay |
| Video Bandwidth | 10MHz |
| R/C Pulse Range | Industry standard 1.0mS / 2.0mS |
| Status Indication | Red / Green LED |
| Power | 4.5 - 5.5V (provided by R/C receiver) |
| Size | 1.15 x 0.95 x 0.20 inches (29 x 24 x 5 mm) |
| Weight | 6 grams |
| Installation Instructions | Click Me! |
Features / Specifications:, ,
This R/C system activated switch allows you to remotely choose ...DPCAV
R/C CONTROLLED DUAL VIDEO SWITCH (2-WAY)
| Video Switch | Solid State SPDT Relay |
| Video Bandwidth | 10MHz |
| Video Insertion loss | 0.1dB typical |
| R/C Pulse Range | Industry standard 1.0mS / 2.0mS |
| Status Indication | Red / Yellow LED |
| Power | 4.5 - 13V / 20mA (provided by R/C receiver) |
| Size | 1.3 x 0.9 x 0.20 inches (33 x 23 x 5 mm) |
| Weight | 5 grams |
| Installation Instructions | Click Me! |
Features / Specifications:, ,
This R/C system activated video switch allows you to remotely ...DPCAV
900MHZ PRO-SERIES A/V TRANSMITTER, 500MW
| USA model has one RF channel | 910MHz (FCC imposed restriction). |
| USA Model Instruction Manual | Click Me! |
| Non-USA Instruction Manual | Click Me! |
| Help! What else do I need? | Click Me! |
| 900MHz EMI/RFI Information | Click Me! |
For convenient installation, the TX905-PRO has a JST female power cable (compatible with several of our 3-cell LiPO batteries) and servo-style connectors on the camera and microphone cables. We've made it as ready to use as we could. Just add your compatible camera, battery, and A/V receiver (not included). Plus, a variety of optional accessories are available to make your installation as simple as possible:Click Me!, We also offer high quality 900MHz A/V receivers that work great with this transmitter. So if you don't already have a compatible receiver then be sure to check them out:click here, Non-USA (export) model has four RF channels:, 910MHz, 980MHz, 1010MHz, 1040MHz, Notice: Due to its high RF power, using the TX905-PRO in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements imposed by your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.,
We've raised the bar again! This 900MHz wireless video transmitter ...DPCAV
WIRELESS VIDEO TRANSMITTER & OSD, FPV DEAL
| Item A | EagleTree eLogger V4 with 100 Amp sensor. |
| Item B | USB cable for eLogger firmware updates. |
| Item C | Eagle Tree OSD Pro Video Expander module. |
| Item D | GPS extension cable for kits shipped before June-2010. |
| Item E | eLogger GPS-V4 Expander module. |
| Item F | Eagle Tree OSD Pro cable Kit. |
| Item H | DPC-420A 420 line CCD color camera. |
| Item I | DPC-420A/480A camera interconnect cable. |
| Item J | TX9-500 900MHz / 500mW transmitter. |
| Item K | Dipole Antenna, +3dBi omni-directional. |
| Item L | Deluxe A/V cable for TX9-500 transmitter. |
| Item M | Male-male video adapter cable, |
This wireless OSD system will transmit graphic data and voice announcements that report a variety of alarms and data, including: voltage, current, mAH, Watts, Home Arrow, Return to Home (RTH / RTL), RADAR, altitude, course (travel direction), ground speed, longitude, latitude, and navigation waypoints. You can expand this system even further by using the low cost eLogger accessories, such as these:Click Me!, Here's a screen shot that shows some of the information that can be shown (temperature and RPM data requires optional accessories):, , All the data parameters that are supported by the eLogger can be displayed on the video display. Here are some examples:, , Notice: Due to the 900MHz transmitter's high RF power, using it in the USA and other countries will require an amateur/ham radio license (some countries may forbid its use). It is your responsibility to ensure that its use meets the requirements of your government’s RF spectrum regulations. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them., . We have other battery choices so that you can select the best one for your application. More choices:Click Me, (3) The 900MHz A/V receiver is not included, but we offer fully compatible models that work great with this special package. Please look here to purchase them:click here, The video format is available in NTSC or PAL. If you are unsure which to choose then please consult this list:TV Video Standards., ,
Ok, so you've decided that you need the EagleTree OSD ...