Flying-Hobby
GRYPHON EXTREME-HELI DC-DC VOLTAGE REGULATOR - BLACK
| Product Details | Specifications |
| - Input voltage | 6 to 10 Volts (5 to 8 cell NiCd/MH or 2cell LiFe/Po) |
| - Output voltage | Servo channel 5.2V, 6.0V, 6.8V, 7.4V, 8.4V(Bypass) |
| - Output current | Servo channel 10A(MAX15A @6.0V) |
| - Low voltage alarm setup | LiFe type(6.5V) LiPo type(7.3V) Enable to setup |
| - Switch type | Fail safe(Fail-Safe-On) Pin-flag Contactless Type |
| - Power connector type | DINS Connector Type |
| - Size | 17mm(H) x 40mm(W) x 64mm(L) |
| - Weight | 45g (Excluding cables) |
| - Components | Main unit 1EA, RX cable 4EA, Switchboard & Cable 1EA, |
| Signal terminal | low voltage alarm output |
| + terminal | the same voltage output as servo channel |
| - terminal | common ground |
☞ The case that the servo specifications are the same : If operating voltage specifications of four channel servos are all the same, all four channels are connected., ☞ The case that the servo specifications are different : If it is used three CCPM(6.0V) and a throttle servo(4.8V) mixed with devices such as governor, the throttle servo should be used to directly connect with the receiver.,
RX channel 5.2V(Fixed) RX channel 5A(MAX10A) Operating guide Features ◆ ...Flying-Hobby
T-REX 600E PRO DFC COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, , Specification(3GX Programmable Flybarless System) :, , Specification(T-REX 600E PRO DFC) :, , Specification(T-REX 600E PRO DFC) :, , ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, , Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC Kit 1 Castle ICE2 HV 80 ...Flying-Hobby
DEAL - T-REX 700E DFC SUPER COMBO (FREE SHIPPING)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1345mm |
| ● Height | 360mm |
| ● Width | 208mm |
| ● Main Blade Length | 690mm |
| ● Main Rotor Diameter | 1562mm |
| ● Tail Rotor Diameter | 281mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 104T |
| ● Tail Drive Gear | 22T |
| ● Weight(With Motor) | 2900g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 700E DFC) :, ● Drive Gear Ratio: 1:9.33:4.37, Specification(T-REX 700E DFC) :, , Features:, 1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed., Accessories:, ●T-REX 700E DFC Kits Set x 1set, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
●3GX is currently the smallest and lightest flybarless system on ...Flying-Hobby
MAXWELL-MX306BB SERVO (HIGH SPEED)
| Weight | 6.6 grams / 0.23oz. |
| Dimensions | 22 x 10 x 23 mm / 0.86 x 0.4 x 0.9 inch |
| Torque At 4.8V | 0.8kg/cm , 12 oz/in |
| Speed At 4.8V | 0.10 sec / 60 deg at no load |
| Motor Type | 3 pole magnetic motor |
Flying-Hobby
BMR-6CH-72MHZ (FUTABA)RECEIVER
| Current Drain | 48 mA +/- 550 mA |
| Operating Voltage | 3.6~7.2V |
| Modulation | FM(PPM) |
| Sensitivity | 5uV |
| Range(on Ground) | 250m / 800’ ft |
| Size(W x L x H)? | 20.3 x 30.5 x 9.8 mm |
| Ant length | 100cm / 40” in |
| Weight Vertical | 8.6g |
Flying-Hobby
FUTABA TX NECKSTRAP BALANCER B3
Best For :, Futaba / 6EXH / 6EXH 2.4GHz / 7C / 7C 2.4GHz / 9C / 12GF / 12GF 2.4GHz / 14MZ / 14MZ 2.4GHz,
JR9XII / JR DSX9 DSM2 2.4GHz / JR 10X PCM ...Flying-Hobby
TITAN E325SE EXTREME DSX9 2.4G 9CH READY TO FLY
| Full Length of fuselage | 25.75" |
| Full width of fuselage | 4.72" |
| Total height | 8.3" |
| Main rotor dia | 28.54" |
| Tail rotor dia | 6.14" |
| Full equipped weight | 30.60 oz. |
| Motor | No.2382 OBL 29-37-10H |
| ESC | No.8041-H BLC-40 |
| Blades | Wood Blades |
Combo Included:, 1.Titan E325 Kit, Specification:, Gear ratio: 1 : 11.5 : 4.4, Features:, Full CNC metal rotor head, Content:, Accessories Needed:, Radio Set - Transmitter (6 or more channels), Servo x4, Receiver, Battery, Gyro & Rubber band.,
Titan Brushless Motor Titan 40A ESC Hitec HS65 MG Hitec ...