Pilot 1 Flying-Hobby Page 2 Review

Flying-Hobby

ROTORTECH 550MM CARBON BLADES MAIN BLADE

Length	550mm
Width	51mm
Grip Thickness	12mm
Hole	3-4mm
Airfoil	Symmetrical
Tip	Angled
Make	Carbon Fiber
Common Application	30 size RC Helicopters

Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,

2x spacers Low parasitic drag coeficient due to the efficient ...

Flying-Hobby

FPV TRANSMITTER TRAY (W/O MONITOR) COMBO

Features of Transmitter Tray:, Specifically designed for FPV pilots, there is enough space to install your video receiver and related equipment., Features of Dual-shoulder Transmitter Neck Strap:, Two fixed points mode for transmitter tray, one fixed point mode for normal RC transmitter.,

Removable wrist rests Optional LCD monitor and hood. Adjustable design ...

Flying-Hobby

AR.DRONE PARROT MAINBOARD + VERTICAL CAMERA

Description :, The main board includes the Parrot P6 central CPU of the AR.Drone. The P6 chip has been specially designed for the AR.Drone. It includes a 468 MIPS ARM926EJ Risc CPU and a video accelerator. The main board runs Linux along with AR.Drone software. The main board includes 256 Mb 200 MHz 32 Bits MDDR RAM and 32Mb of NAND Flash. It includes a Wi-Fi chipset from Atheros and an USB Port for direct flashing and future extensions. The Atmel P6MU chip is a power management chipset for the P6 chipset., The Parrot software performs:, - Stabilizing and auto piloting of the AR.Drone.,

The main board includes also the 60 FPS vertical camera. ...

Flying-Hobby

EDGE 95 MM SE PREMIUM CF TAIL ROTOR BLADES

Specs	- Length
- Width	29-25mm
- Root	5mm
- Bolt Hole	3mm

Features:, - Airfoil designed specifically for high speed tail rotor application., Includes:, - One pair of EDGE blades.,

Product description EDGE high performance CF blades are new premium ...

Flying-Hobby

T-REX 500 PRO DFC COMBO

● Length	868mm
● Height	275mm
● Main Blade Length	425mm
● Main Rotor Diameter	978mm
● Tail Rotor Diameter	206mm
● Motor Drive Gear	12T
● Main Drive Gear	134T
● Autorotation Tail Drive Gear	145T
● Tail Drive Gear	36T
● Weight(With Motor)	1210g

Remark :, All T-REX 500 DFC Combo have change to this canopy -, Specification(T-REX 500 PRO DFC) :, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),

HC5112 ●Equipped with the low CG DFC rotor head, effectively ...

Flying-Hobby

DJI PHANTOM PROPELLER GUARD

Weight(Single)	18.7g
Whole Size with Four Prop Guards	575.5mm

Specifications:, , Size(Single):, Angle(155.0°) Radius(112.32mm),

The Phantom Prop Guard is designed to protect your propellers ...

Flying-Hobby

T-REX 450 PRO V2 SUPER COMBO (FLYBAR)

Specification	●Length
●Height	230mm
●Main Rotor Diameter	710mm
●Tail Rotor Diameter	158mm
●Motor Drive Gear	12T
●Main Drive Gear	121T
●Autorotation Tail Drive Gear	106T
●Tail Drive Gear	25T
●Weight(with motor)	550g
●Color carton	27.3x10x6.6cm
●Outer carton	56x31x28cm ,24sets/ctn

Instructions:, Preface:, ●T-Rex 450 Pro V2 is a newly revised flybared helicopter model. The first sight of T-Rex 450 PRO V2 will surely leave a lasting impression of its attractive designs. The aerodynamic canopy is the most noticeable feature of T-Rex 450 PRO V2. The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity, contributing to optimal flight stability and aerobatic agility., Features:, ●The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity. With the highly precise metal washout control arm and best mixing radio, it is contributing to optimal flight stability and aerobatic agility., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO V2 Kits Set X1,

●Custom designed side frame allows for ease of electronics install ...

Flying-Hobby

KBDD 90/700 EXTREME EDITION PADDLES - NEON ORANGE 4MM

Product description Fits 90 & 700 Size Helicopters Using 4mm ...

Flying-Hobby

600D 3G CARBON FIBER BLADES (H60196)

●Shape	Symmetrical wing
●Length	600x55x7.5mm
●Width	12mm
●Shaft Diameter	4mm
●Weight	265g/set

Instruction:, ●Use for T-REX 600 3G Flybaless System., Specification:,

●3G carbon main blades with CG shifted outwards, and slight ...

Flying-Hobby

T-REX 600E PRO DFC FUTABA 6J 2.4G RTF COMBO

●Operating Temperature	-10~60 degree
●X and Y axis Operating Angle Range	-300~+300 degree
●Z axis Operating Angle Range	-600~+600 degree
●Size	36.5x25.2x15.6 mm Size
●Maximum working voltage	8.5V
● Length	1174mm
● Height	319mm
● Width	210mm
● Main Blade Length	600mm
● Main Rotor Diameter	1347mm
● Tail Rotor Diameter	260mm
● Motor Drive Gear	13T
● Main Drive Gear	112T
● Autorotation Tail Drive Gear	131T
● Tail Drive Gear	34T
● Weight(With Motor)	2290g

Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),

T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...

Flying-Hobby

T-REX 450 PRO V2 JR XG8 RTF COMBO (FLYBAR)

Specification	●Length
●Height	230mm
●Main Rotor Diameter	710mm
●Tail Rotor Diameter	158mm
●Motor Drive Gear	12T
●Main Drive Gear	121T
●Autorotation Tail Drive Gear	106T
●Tail Drive Gear	25T
●Weight(with motor)	550g
●Color carton	27.3x10x6.6cm
●Outer carton	56x31x28cm ,24sets/ctn

Included:, ●T-REX 450 PRO V2 Kits Set X1, Instructions:, Preface:, ●T-Rex 450 Pro V2 is a newly revised flybared helicopter model. The first sight of T-Rex 450 PRO V2 will surely leave a lasting impression of its attractive designs. The aerodynamic canopy is the most noticeable feature of T-Rex 450 PRO V2. The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity, contributing to optimal flight stability and aerobatic agility., Features:, ●The rotor head is precision made with CNC aluminum alloy for higher mechanical rigidity. With the highly precise metal washout control arm and best mixing radio, it is contributing to optimal flight stability and aerobatic agility., ●Drive Gear Ratio: 1:10.08:4.24, Accessories:, ●T-REX 450 PRO V2 Kits Set X1,

●325D Carbon blades X1set ●RCE-BL35P 35A Brushless ESC X1 ●450MX ...

Flying-Hobby

T-REX 500PRO DFC FUTABA 8J RTF COMBO (DFC VERSION)

●Operating Temperature	-10~60 degree
●X and Y axis Operating Angle Range	-300~+300 degree
●Z axis Operating Angle Range	-600~+600 degree
●Size	36.5x25.2x15.6 mm Size
●Maximum working voltage	8.5V
● Length	868mm
● Height	275mm
● Main Blade Length	425mm
● Main Rotor Diameter	978mm
● Tail Rotor Diameter	206mm
● Motor Drive Gear	12T
● Main Drive Gear	134T
● Autorotation Tail Drive Gear	145T
● Tail Drive Gear	36T
● Weight(With Motor)	1210g

Remark :, All T-REX 500 DFC Combo have change to this canopy -, Combo Included :, ●T-REX 500PRO DFC Kits Set X1, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System:, T-REX 500 PRO DFC:, ●Features, :, ● Drive Gear Ratio: 1:11.17:4.03,

HC5112 ●3GX Flybarless System X1 set ●425 3G Carbon fiber ...