RCModelScout.

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER AND GPS/COMPASS

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

GetFPV

DJI NAZA M V2 MULTI-ROTOR STABILIZATION CONTROLLER

Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,

GetFPV

OPENPILOT CC3D FLIGHT CONTROLLER (PRE-ORDER)

Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers,

GetFPV

FM4008 620KV MULTI-ROTOR MOTOR

KV: 620kv,

GetFPV

LAYERLENS GOPRO LENS PROTECTION (FOR GOPRO 1 & 2)

NOTE: This version of LayerLens is not compatible with the GoPro Hero 3. A new LayerLens for the Hero 3 will be released soon., For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,

GetFPV

TBS 900KV MOTORS & ESCS (4PCS EACH)

Note: Propellers not included. We suggest Graupner E-Props 9x5 or 10x5 for this drive system. You need 2 clockwise, and 2 counter-clockwise propellers.,

GetFPV

LAYERLENS FOR GOPRO3 (V2)

For this reason, FPV Manuals developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. Fully assembled, LayerLens for the GoPro 3 weighs only 7.5g — a small fraction the weight of the full GoPro case. LayerLens has become the standard lens protection product in the fields of RC and FPV where a GoPro is used outside of its standard housing.,

GetFPV

LAYERLENS GOPRO LENS PROTECTION (FOR GOPRO 1 & 2)

NOTE: This version of LayerLens is not compatible with the GoPro Hero 3. A new LayerLens for the Hero 3 will be released soon., For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,

GetFPV

LAYERLENS GOPRO LENS PROTECTION (FOR GOPRO 1 & 2)

NOTE: This version of LayerLens is not compatible with the GoPro Hero 3. A new LayerLens for the Hero 3 will be released soon., For this reason, FPV Manuals has developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. LayerLens weighs only 11g — about 10% of the weight of the GoPro case. LayerLens is a precision laser cut frame that holds the protective glass lens found in the GoPro's case. LayerLens is pushed onto the GoPro’s built in lens. It sits tightly in place and is secured by an included velcro band. In case of a crash that scratches LayerLens’ glass lens, you can easily swap out the scratched protective lens and replace it with one of the lenses that are readily available by GoPro as part of their “Lens Replacement Kit” (which includes 2 lenses for $14 to $20 USD).,

GetFPV

LAYERLENS FOR GOPRO3 (V2)

For this reason, FPV Manuals developed LayerLens. LayerLens brings the most important part of the original GoPro case back: the protective lens; without adding much weight or size. Fully assembled, LayerLens for the GoPro 3 weighs only 7.5g — a small fraction the weight of the full GoPro case. LayerLens has become the standard lens protection product in the fields of RC and FPV where a GoPro is used outside of its standard housing.,

GetFPV

DJI WOOKONG MULTI-ROTOR AUTOPILOT

Start Motor: When using WKM, pushing throttle stick before takeoff will not start motors. You have to execute any one of following four Combination Stick Commands (CSC) to start motors.,

GetFPV

TBS EZOSD & CURRENT SENSOR

NOTE:, The lipo plugs on the current sensor are XT-60. If you need DEANS plugs, consider the,

GetFPV

IMMERSIONRC EZOSD & CURRENT SENSOR

NOTE:, The lipo plugs on the current sensor are XT-60.,

GetFPV

FATSHARK BASE SD VIDEO GOGGLES

GetFPV

TBS 900KV MOTORS & ESCS (4PCS EACH)

Note: Propellers not included. We suggest Graupner E-Props 9x5 or 10x5 for this drive system. You need 2 clockwise, and 2 counter-clockwise propellers.,