ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
SPORT CUB S BNF WITH SAFE
| Wingspan | 24.3 in (616mm) |
| Overall Length | 16.3 in (414.5mm) |
| Flying Weight | 2.0 oz (57 g) |
| Radio | 4+ channel DSM2/DSMX transmitter required |
| Trim Scheme Colors | Blue and White |
| Prop Size | 130 x 70mm |
| Recommended Battery | 3.7V 1S 150mAh Li-Po (Included) |
| Charger | Fast DC Charger with USB port connectivity |
| Landing Gear | Fixed main with steerable tail wheel |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Learn at your own pace with the HobbyZone® Sport Cub ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE - SPORT CUB BNF PKZ6880
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (included) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
NIGHT VAPOR RTF
| Wingspan | 14.8 in (376mm) |
| Overall Length | 15.3 in (389mm) |
| Flying Weight | 16.4 g (0.6oz) |
| Prop Size | 140mm x 45mm |
| Recommended Battery | 70mAh 3.7V 14C Li-Po |
Is Assembly Required: No,
Like the original Vapor® aircraft, the Night Vapor™ model is ...HobbyKing
AFROFLIGHT NAZE32 ACRO ABUSEMARK FUNFLY CONTROLLER - SOLDERED VERSION (HORIZONTAL PIN)
| Input voltage | Max 16V on input rail and up to 35V 6s on the voltage sense line |
• Flexible motor outputs, support various airframe types:, Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X),
The popular Naze32 is here! Initially designed for use with ...HobbyKing
AFROFLIGHT NAZE32 ACRO ABUSEMARK FUNFLY CONTROLLER - SOLDERED VERSION (VERTICAL PIN)
| Input voltage | Max 16V on input rail and up to 35V 6s on the voltage sense line |
• Flexible motor outputs, support various airframe types:, Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X),
The popular Naze32 is here! Initially designed for use with ...ReadyMadeRC
C-RAY 180 PNP
| Wingspan | 21.7 in (550mm) |
| Overall Length | 13.5 in (342mm) |
| Wing Area | 126 sq. in. (8.05 sq. dm.) |
| Flying Weight | 4.40 oz (125 g) |
| Motor Size | 180-size, 2500Kv brushless outrunner (installed) |
| Radio | 4+ channel transmitter with elevon mixing |
| Servos | (2) 3-gram super sub-micro servos (installed) |
| CG (center of gravity) | 3/4 in (18mm) in front of the forward edge of the servo casing |
| Prop Size | 4.5 x 4 electric propeller (installed) |
| Speed Control | 3-amp brushless (installed) |
| Recommended Battery | 7.4V 2S 430–450mAh LiPo battery (required) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
Is Assembly Required: No,
Features Fully assembled and hinged with control horns and pushrods ...ReadyMadeRC
UMX BEAST 3D BNF BASIC
| Wingspan | 14.7 in (374mm) |
| Overall Length | 15.7 in (400mm) |
| Wing Area | 83.8 sq in (54.2 sq dm) |
| Flying Weight | 2.54 oz (72 g) |
| Motor Size | BL180 2500Kv brushless outrunner |
| Radio | 4-channel minimum |
| Trim Scheme Colors | Black, Red, Silver |
| CG (center of gravity) | 19mm back from leading edge of bottom wing |
| Wing Loading | 3.4 oz/sq ft (1.01 g/sq dm) |
| Prop Size | 5 x 2.75 inch |
| Recommended Battery | 2S 7.4V 180mAh Li-Po |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Approx. Flying Duration | 5 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Seize the UMX™ Beast® 3D, Equipped with AS3X® Technology, and ...ReadyMadeRC
SPORT CUB S RTF WITH SAFE
| Wingspan | 24.3 in (616mm) |
| Overall Length | 16.3 in (414.5mm) |
| Flying Weight | 2.0 oz (57 g) |
| Radio | 6 Channel (Included) |
| Trim Scheme Colors | Blue and White |
| Prop Size | 130 x 70mm |
| Recommended Battery | 150mAh 1S (included) |
| Charger | Fast DC Charger with USB port connectivity |
| Landing Gear | Fixed main with steerable tail wheel |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Learn at your own pace with the HobbyZone® Sport Cub ...ReadyMadeRC
PARKZONE ARCHER RTF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | DX4e 4-channel transmitter (included) |
| Servos | SV80 servos (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
NIGHT VAPOR BNF
| Wingspan | 14.8 in ( |
| Overall Length | 15.3 in (389mm) |
| Flying Weight | 16.4 g (0.6 oz) |
| Prop Size | 140mm x 45mm |
| Recommended Battery | 70mAh 3.7V 14C Li-Po |
Is Assembly Required: No,
Like the original Vapor® aircraft, the Night Vapor™ model is ...ReadyMadeRC
KK21 EVO KK2.1.5 FLIGHT CONTROLLER - LARGER LCD SCREEN!
| Mounting Hole Pattern | 45mm x 45mm |
| The second MPU have two modes | ①【WORKING MODE】②【SETTING MODE】 |
How to use the second MPU of KK21EVO:, There is one red and five blue LEDs on the KK21EVO FC board, red LED named “K”connect to the main MCU(ATmega644PA) like the only LED on KK2.1.5, other five blue LEDs connect to the second MPU named “A” “B” “C” “D” “E”from left to right. If only one of five blue LEDs on(other four LEDs off) that mean receiver type of KK21EVO:, TABLE - I A B C D E, “☼” mean LED on, “×” mean off. 【WORKING MODE】LED always on, 【SETTING MODE】LED flash fast If only one of five blue LEDs off (other four LEDs on) that mean AUX channel number from satellite or S.BUS:, TABLE - II A B C D E, MARK:, Except display area more big, KK21EVO‘s LCD is a little different from Hobbyking KK2.1.5, If you flash the firmware of KK2.1.5 maybe the contrast of LCD little dark. We already change all the firmware of KK2.1.5 that we find, you can send a email to then will receive a email include download link. Also can use your KK2.1.5’s flash software or other software like xeltek programmer’s software to edit KK2.1.5’s firmware. You need find “0xEE 0xC8 0x2F 0x24” and change it to “0xEE 0xC8 0x2F 0x23” (change 0x24 to 0x23, this will adjust contrast parameter of LCD). If you can’t find the firmware in our email and can’t change the firmware yourself, send the firmware to we will change and send it back to you., TO SOFTWARE DEVELOPER:, KK21EVO’s contrast of LCD is a little different from Hobbyking KK2.1.5, you need adjust the [V5 voltage regulator internal resistor ratio set, 00100xxx] command of the LCD controller (ST7565),
This is the EVO version of the KK2 flight controller ...ReadyMadeRC
BLADE - 180 QX HD BNF WITH SAFE BLH7480A
| Type | Quad-Copter |
| Main Rotor Diameter | 14.0 in (355mm) |
| Gross Weight | 3.35 oz (95 g) |
| Length | 11.5 in (292mm) |
| Motor Size | (4) 8.5mm brushed |
| Kit/ARF/RTF | RTF |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ngHobbies
700MW 2.4GHZ IMMERSIONRC TRANSMITTER (3CH)
| Operating Frequencies | 2396Mhz, 2410Mhz, 2430Mhz |
| Weight | 28 grams (without antenna) |
| Size | 57 x 34mm |
| Input voltage range | 6 - 25 v |
Parameters:, 700mW output power, Content of the package:, 1 x 700mW Transmitter module, Note:, The use and operation of this product in Canada and United States will require a HAM or Amateur radio license. Please check with your local authorities before purchasing this product.,
The new 2.4Ghz 700mW transmitter from ImmersionRC is bringing back ...