HiModel
WFLY 2.4G 9-CHANNEL RECEIVER WFR09S
| Receiver Model | WFR09S |
| Range test in ground | more than 900M |
| Dual MCU, dual antenna receiver | Contains two receivers working independently |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR09S) 9 channel 2.4GHz dual MCU, dual antenna receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, Features:, Choose the optimum signal for antenna, More reliable, Quicker response, Better anti-interference, Longer range, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...5 Reviews
HiModel
WFLY 2.4G 4-CHANNEL MINI RECEIVER WFR04S
| Receiver Model | WFR04S |
| Range test in ground | more than 600M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR04S) 4 channel 2.4GHz Receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Fail safe , quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：24×14mm, Net Weight：2.2g (Gross Weight：2.8g), , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
WFLY 2.4G 6-CHANNEL MINI RECEIVER WFR06S
| Receiver Model | WFR06S |
| Range test in ground | more than 700M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR06S) 6 channel 2.4GHz Receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe ,quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...2 Reviews
HiModel
WFLY 2.4G FUTAB/HETIC COMPATIBLE RF MODULE W/WFR06S RECEIVER
| Module Model | WFTRFS |
| Application | Airplane, helicopter, glider, car, boat |
| Band | 2.400GHz-2.4830GHz( varies with different country and region) |
| Output power | ≤100Mw |
| Current drain | ≤150mA |
| Modulation | PPM/PCMS 1024 /PCMS 4096 |
| Power | 9.6-12V |
| Dimension | 59×37×34mm |
| Weight | 40.9g |
| Receiver Model | WFR06S |
| Range test in ground | more than 700M |
, , , , , , Specifications:, , , , , , , , , , , 2.4Ghz SET C (WFTRFS+WFR06S)--2.4GHz module with 6 channel 2.4GHz receiver, Radio frequency working statue checking function, Fail Safe, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：34.85×21×11.3mm, Weight：6.0g, , ,
Features: The specification of 2.4Ghz receivers: A. Hopping frequency is ...HiModel
WFLY 2.4G FUTAB/HETIC COMPATIBLE RF MODULE W/WFR07S RECEIVER
| Module Model | WFTRFS |
| Application | Airplane, helicopter, glider, car, boat |
| Band | 2.400GHz-2.4830GHz( varies with different country and region) |
| Output power | ≤100Mw |
| Current drain | ≤150mA |
| Modulation | PPM/PCMS 1024 /PCMS 4096 |
| Power | 9.6-12V |
| Dimension | 59×37×34mm |
| Weight | 40.9g |
| Receiver Model | WFR07S |
| Range test in ground | more than 800M |
, , , , , , Specifications:, , , , , , , , , , , 2.4Ghz SET B (WFTRFS+WFR07S)-- 2.4GHz module with 7 channel 2.4GHz receiver, Radio frequency working statue checking function, Fail Safe, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：40.42×27.27×11.88mm, Weight：9.6g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
WFLY 2.4G FUTAB/HETIC COMPATIBLE RF MODULE W/WFR09S RECEIVER
| Module Model | WFTRFS |
| Application | Airplane, helicopter, glider, car, boat |
| Band | 2.400GHz-2.4830GHz( varies with different country and region) |
| Output power | ≤100Mw |
| Current drain | ≤150mA |
| Modulation | PPM/PCMS 1024 /PCMS 4096 |
| Power | 9.6-12V |
| Dimension | 59×37×34mm |
| Weight | 40.9g |
| Receiver Model | WFR09S |
| Range test in ground | more than 900M |
| Dual MCU, dual antenna receiver | Contains two receivers working independently |
, , , , , , Specifications:, , , , , , , , , , , 2.4Ghz SET A (WFTRFS+WFR09S)--2.4GHz module with 9 channel 2.4GHz dual MCU, dual antenna receiver, Radio frequency working statue checking function, Fail Safe, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, Features：, Choose the optimum signal for antenna, More reliable, Quicker response, Better anti-interference, Longer range, Notes：For better preformance, place two antennas in 90 degree, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...HiModel
FRSKY TWO-WAY 2.4G DHT MODULE - TOGGLE SWITCH VERSION
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 3072 (>11bit) |
, , , , , , , , Features:, , , , , , , , , , , THIS IS THE NEW TOGGLE SWITCH VERSION DHT., 1.1 Compatibility:, Switch 1, , Switch 2, , Mode of DHT, , Compatibility, , OFF, , OFF, , Two-way Mode, , Two way telemetry receivers (D8R, D6FR), , OFF, , ON, , V8 Mode, , V8 receivers (V8FR-HV, V8R7-HV, V8R7-SP, V8R4), , 1.2 Specifications:, 2. Setup, 2.1 Installation process:, 1）Open the transmitter, find out Battery power supply line, PPM signal line, and GND., 2）Take the order and solder Battery power supply line, PPM signal line, and GND to DHT with 3 wires., (RED→V+; BLACK→GND; YELLOW→PPM), 3）Drill one hole on the transmitter to install the PCB with F/S button, GREEN/RED LED and two switches., 4）Connect the antenna connector at the port on transmitter board., 5）Drill a hole for antenna connector at suitable space on the transmitter (diameter 7mm is suitable)., 6）Fix the transmitter antenna on the connector .Turn the transmitter power on and check the power indicator LED, which is normally light RED., 2.2 Bind procedure, 1）Turn your transmitter on and switch it to PPM mode. Turn your transmitter off., 2） Turn your transmitter on while holding the F/S button on the transmitter module (Please make sure DHT is in its corresponding mode when working with V8 or two way telemetry receivers). Release it in a few seconds. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind the receiver., 3）Connect battery to the receiver while holding the F/S button on the receiver. The RED LED on the receiver will flash, indicating the binding process is completed., 4）Turn on the transmitter and re-connect battery to the receiver. The RED SOLID LED on the receiver will indicate the receiver is receiving commands from the transmitter., 5）After the above steps are completed, both the transmitter and the receiver are ready to be used., Notice: When working with two way telemetry receivers (D8R or D6FR), please kindly make sure that the battery ,
Features: THIS IS THE NEW TOGGLE SWITCH VERSION DHT. 1.1 ...1 Reviews
HiModel
CORONA 4-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER W/S.BUS R4FA-SB
| Channel number | 4ch |
| Operating Current | 50mA max |
| Operating Voltage | 3.6 ~10V |
| Latency | R4FA-SB’s description |
| Sensitivity | about -100dBm |
, , , , , , Specifications:, , , , , , , , , , , 14mS for independent 4 channel output and S.BUS output @ FASST multi-channel mode, 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode, 16mS for independent 4 channel output and S.BUS output @ FASST 7ch mode, 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode, 14mS for independent 3 channel output@ FASST surface system C1 CODE mode, R6FA-SB’s description, 7mS for independent 6 channel (HS) output@ FASST multi-channel mode, 14mS for independent 7 channel (LS) output and S.BUS output @ FASST multi-channel mode, 8ms for independent 6 channel (HS) output@ FASST 7ch mode, 16mS for independent 7 channel (LS) output and S.BUS output @ FASST 7ch mode, 14ms for independent 3 channel output@ FASST surface system C1 CODE mode, Operation temperature:, -10~80 deg C, , ,
Features: Compatibility: The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ...HiModel
CORONA 6-CHANNEL 2.4G SPREAD SPECTRUM/FASST COMPATIBLE RECEIVER W/S.BUS R6FA-SB
| Type | R6FA-SB |
| Channel number | 4ch |
| Operating Current | 50mA max |
| Operating Voltage | 3.6 ~10V |
| Latency | R4FA-SB’s description |
| Sensitivity | about -100dBm |
, , , , , , Specifications:, , , , , , , , , , , 14mS for independent 4 channel output and S.BUS output @ FASST multi-channel mode, 21mS for Continuous PPM output and RSSI output@ FASST multi-channel mode, 16mS for independent 4 channel output and S.BUS output @ FASST 7ch mode, 24mS for Continuous PPM output and RSSI output@ FASST 7ch mode, 14mS for independent 3 channel output@ FASST surface system C1 CODE mode, R6FA-SB’s description, 7mS for independent 6 channel (HS) output@ FASST multi-channel mode, 14mS for independent 7 channel (LS) output and S.BUS output @ FASST multi-channel mode, 8ms for independent 6 channel (HS) output@ FASST 7ch mode, 16mS for independent 7 channel (LS) output and S.BUS output @ FASST 7ch mode, 14ms for independent 3 channel output@ FASST surface system C1 CODE mode, Operation temperature:, -10~80 deg C, channel number: 6, , ,
Features: Compatibility: The CORONA 2.4GHz Spread Spectrum FASST Compatible Receiver ...HiModel
SKYRC I-METER MULTIMETER 7 IN 1
| Max input voltage | 60V |
| Voltage measurement range | 2-8S LiPo/LiFe/LiIon |
| Voltage display resolution | 0.001V |
| Volt Port | 2.54mm pitch pins, 9 pins |
| Max current | 100A |
| Shunt resistance | 0.001ohm |
| Displayed resolution A | 0.01 |
| Temperature resolution | 1 Celsius / 1 Fahrenheit |
| PPM signal output | 750uS – 2150uS |
| Number of propeller measurable | 1 to 5 |
| Propeller rotating range | 1-60000RPM |
| Dimension | 95.3x72.8x21.5mm |
| Net Weight | 85g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: FEATURES 1. Battery Checker 2. Battery Internal Resistance 3. ...HiModel
WFLY 72.430MHZ CH.32 FM DUAL CONVERSION RECEIVER CRYSTAL
| Frequency | 72.430 Mhz |
| Channel | Ch. 32 |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., * This crystal only work with dual conversion receivers, does not work with single conversion receivers., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini sizeHiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
| ● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
| ● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
| ● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
WFLY 40.790MHZ CH.79 FM DUAL CONVERSION CRYSTAL (SET)
| Frequency | 40.790 Mhz |
| Channel | 79 Ch. |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini size 1 X ...HiModel
WFLY 72.130MHZ CH.17 FM DUAL CONVERSION RECEIVER CRYSTAL
| Frequency | 72.130 Mhz |
| Channel | 17 Ch. |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini sizeHiModel
WFLY 72.310MHZ CH.26 FM DUAL CONVERSION RECEIVER CRYSTAL
| Frequency | 72.310 Mhz |
| Channel | Ch. 26 |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., * This crystal only work with dual conversion receivers, does not work with single conversion receivers., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini size