HiModel
36MHZ WFT08 8-CHANNEL PCM/PPM RADIO SYSTEM
| MODEL NO. | WFT08 |
| ●Band | 36 MHz |
| ●Output | ≤750mW |
| ●Current drain | ≤300mA |
| ●Output pulse | 1000μs-2000μs |
| ●Modulation | PPM/PCM |
| ●RF module | individual |
| ●Power | 1.2v×8 (9.6v) Ni-cad/Ni-MH rechargeable batteries |
| RECEIVER type | WFR08-P PPM |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, 1.5v×8(12v) normal alkalescence batteries, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., *This radio come in white foam packing only, no outer color carton., , ,
Features: 8 Channels transmitter Specification and features 1. Model: WFT08 ...HiModel
FRSKY 2.4G 8-CHANNEL RECEIVER W/PPM OUTPUT V8R7SP
| Model | V8R7-SP |
| Operating Voltage Range | 3.0V-16.0V |
| Operating Current | 30mA |
| Resolution | 3072 |
| Latency | 22ms |
| Specified | 7CH, 9g, 49mm×23mm×12mm, 1.5km-2.5km |
| Warning | DO NOT connect servos to channel 8, otherwise servos will get hot or even burn out. |
, , , , , , Specifications:, , , , , , , , , , , V8R7-SP improves the smoothness of high-speed digital servos., Bind Procedure:, 1) Turn on your transmitter and switch it to PPM mode, turn off the TX., 2) Turn on your transmitter while holding the programming button. Release it a few seconds later. The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind the receiver., 3) Connect the battery to the receiver while holding the receiver’s F/S button. The LED on the receiver will flash, indicating the binding process is complete. Turn off the transmitter and receiver., 4) Turn on your transmitter. Connect the battery to the receiver when ORANGE LED on TX is on. The LED on the receiver will indicate the receiver is receiving commands from the transmitter. In a few seconds system is ready to work (communication is established)., Binding is required only to set up a new link (like new or additional receiver or transmitter module). To control multi-receivers, every receiver should be programmed with the transmitter in binding state., Failsafe:, V8R7-SP supports failsafe function for all channels. Just do it as bellow:, After the receiver has been bind, press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, the failsafe is set up successfully., If you do not need the failsafe function any more, just re-bind the receiver., , ,
Includes/Requires: Includes:1 x V8R7SP receiverHiModel
ASSAN 2.4G X8D CONVERSION RF MODULE FOR NON-MODULE BASED PPM TRANSMITTERS
| Includes | 1 x RF module 2.4G |
Features:, , Includes/Requires:, ,
This module is designed to convert your conventional non-module based ...11 Reviews
HiModel
MULTIMETER (ESC TESTER/ SERVO TESTER/ PPM SIGNAL/ TEMPERATURE) 4-IN-1 ACCESSORY FOR BATTERY CHECKER LBVTBA
| Includes | 1 x multimiter |
| Requires | 1 x |
Features:, , Includes/Requires:, ,
- Performance testing of ESC. - Servo rotation direction and ...HiModel
SBUS1 TO PPM DECODER (SUPPORTING 10CG, 14SG)
Specifications:, ,
Features: Includes/Requires:HiModel
FY21AP FPV INERTIAL ATTITUDE STABILIZER(TRADE EDITION) FY-21AP
| Incorporating the AP117 OSD module transmits these parameters | *altitude |
| Additional data can be interfaced to your PC via the Data Radio Link Module upgrade | *longitude |
| Any other configuration, please e-mail us for enquiry | feiyudz@hotmail.com |
| Includes | FY21AP (2.0) Module |
Features:, , In addition, barometric pressure data allows precise altitude hold capability. Beyond providing stabilization for the RC Pilot, under any flight conditions, connections to our other modules allow enhancements such as:, *auto-return to launch site, The FY-21AP can be installed in the following aircrafts:, Normal / Traditional fixed-wing planes, Remote Control system requirement:, The FY-21AP has been tested to work with the following RC systems:, Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, , Resources:, Download Software and instruction manual.,
1. Briefly introduce The FY21AP is a stand-alone autopilot system ...HiModel
FY31AP PATH NAVIGATION & HORNET OSD COMBO
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Includes | 1 x FY-31AP |
Features:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, • Level flight - When stabilization is activated, the FY31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, • First Person View (FPV) - by connecting this interface to the FY-OSD, telemetric data such as GPS, flight navigation, AHI can be displayed on your downlink video.On the other hand, it will be easier to operate FPV with the functions of automaticbalanceand automated return to home., • FY-31AP module:, • GPS module:, The FY-31AP can be installed in the following aircraft :, 1. Normal / Traditional fixed-wing planes;, The FY-31AP has been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, ,
1. Attitude Flight Stabilization System (AFSS) FY31-AP is an inertial ...1 Reviews
HiModel
35MHZ CORONA 6CH RECEIVER (SINGLE CONVERSION) RS610Ⅱ
, , , , , , Specifications:, , , , , , , , , , , Size, , , 36*18.7*8.2mm, , , Weight, , 6.8g, , Sensitivity, , about 2.0μV, , Selectivity, , ±8kHz at 65dB down, , Number of channels, , 1-6, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 element ceramic filter, , Filtering, , DSP filtering in MCU with mild algorithm, , Shift polarity, , Positive or negative (auto-detect), , Case, , Shrink wrap, , Operating Voltage, , 4.8V~6.0VDC, , Operating Current, , 11mA, , Modulate, , FM/PPM(pulse position modulation), , , ,
Features: RS610II Receiver CORONA never stops improving the receiving range. ...HiModel
40MHZ CORONA 6CH RECEIVER (SINGLE CONVERSION) RS610Ⅱ
, , , , , , Specifications:, , , , , , , , , , , Size, , , 36*18.7*8.2mm, , , Weight, , 6.8g, , Sensitivity, , about 2.0μV, , Selectivity, , ±8kHz at 65dB down, , Number of channels, , 1-6, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 element ceramic filter, , Filtering, , DSP filtering in MCU with mild algorithm, , Shift polarity, , Positive or negative (auto-detect), , Case, , Shrink wrap, , Operating Voltage, , 4.8V~6.0VDC, , Operating Current, , 11mA, , Modulate, , FM/PPM(pulse position modulation), , , ,
Features: RS610II Receiver CORONA never stops improving the receiving range. ...HiModel
72MHZ CORONA 6CH RECEIVER (SINGLE CONVERSION) RS610Ⅱ
, , , , , , Specifications:, , , , , , , , , , , Size, , , 36*18.7*8.2mm, , , Weight, , 6.8g, , Sensitivity, , about 2.0μV, , Selectivity, , ±8kHz at 65dB down, , Number of channels, , 1-6, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 element ceramic filter, , Filtering, , DSP filtering in MCU with mild algorithm, , Shift polarity, , Positive or negative (auto-detect), , Case, , Shrink wrap, , Operating Voltage, , 4.8V~6.0VDC, , Operating Current, , 11mA, , Modulate, , FM/PPM(pulse position modulation), , , ,
Features: RS610II Receiver CORONA never stops improving the receiving range. ...HiModel
72MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER
| MODEL NO. | WFT09H |
| MODULATION | FM(PPM) and PCM |
| OUTPUT POWER | ≤700mW |
| POWER SUPPLY | 1.2V x 8 (9.6V) |
| CURRENT DRAIN | 200mA |
| Band | 72MHz |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., , ,
Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...HiModel
35MHZ WFT09S 9-CHANNEL RADIO W/WFR08-P RECEIVER (SUPER EDITION)
| Model | WFT09S |
| Use in | airplane, helicopter, glider, car, boat |
| Band | 35MHz |
| Output power | ≤750mW (35MHz-75MHz) |
| Modulation | PPM/PCMS 1024/PCMS 4096 |
| RF module | individual |
| Resolution | 4096 |
| Power | 9.6-12V |
| Mix | PROG.NOR.MIX (7 series) PROG.CUR.MIX (4 series) |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , 9 channels R/C System (4096 Resolution), 85- model memory, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., , ,
Features: ▲High Speed, High Resolution, optimized PCMS 4096 " High ...3 Reviews
HiModel
35MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER
| MODEL NO. | WFT09H |
| MODULATION | FM(PPM) and PCM |
| OUTPUT POWER | ≤700mW |
| POWER SUPPLY | 1.2V x 8 (9.6V) |
| CURRENT DRAIN | 200mA |
| Band | 35MHz |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., , ,
Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...4 Reviews
HiModel
40MHZ WFT 09 9-CHANNEL RADIO W/WFR08-P RECEIVER
| MODEL NO. | WFT09H |
| MODULATION | FM(PPM) and PCM |
| OUTPUT POWER | ≤700mW |
| POWER SUPPLY | 1.2V x 8 (9.6V) |
| CURRENT DRAIN | 200mA |
| Band | 40MHz |
| Receiver type | WFR08-P |
, , , , , , Specifications:, , , , , , , , , , , TRANSMITTER, RECEIVER, RECEIVER, * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., SINCE THE MANUFACTURER CHANGED THE CODING METHOD OF THEIR RADIO SYSTEM, ALL THE WFLY TRANSMITTER NOW CAN ONLY WORK WITH THEIR OWN RECEIVERS, AND ALL WFLY RECEIVERS ARE ALSO ONLY COMPATIBLE WITH THEIR OWN TRANSMITTERS., IN OTHER WORDS, THE WFLY RADIO SYSTEM NOW ARE NOT COMPATIBLE WITH OTHER FUTABA STANDARD TRANSMITTERS AND RECEIVERS!, THIS RADIO SET NOW COME IN FOAM PACKING ONLY, WITHOUT THE OUTER COLOR CARTON BOX., * Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order., , ,
Features: Computerized transmitter. 132 x 64 FSTN LCD, easy operating ...HiModel
WFLY 2.4G 7-CHANNEL RECEIVER WFR07S
| Receiver Model | WFR07S |
| Range test in ground | more than 800M |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR07S) 7 channel 2.4GHz Receiver, Use in： airplane, helicopter, glider, car, boat, Band： 2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity： -97dBm, Fail safe , quick recover signal, Modulation： PPM/PCMS 1024/PCMS 4096, Power： 4.8-6V, Dimension： 40.42×27.27×11.88mm, Weight： 9.6g, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...