HobbyKing
HOBBYKING PPM SIGNAL MIXER VERSION B FOR HEAD-MOVEMENT-TRACKER GYRO
PPM Signal Mixer is specifically designed for those who own ..." />
| Note | Only works with Futaba transmitters. |
| Voltage Supply | 8V-12V |
Weight: 4g,
PPM Signal Mixer is specifically designed for those who own ...5 Reviews
HobbyKing
FUTABA 12ZH PCM/PPM G3 2048 W/R6014HS 2.4GHZ RECEIVER (MODE 1)
Features:, • Dial-N-Key setup and the single joy stick button to move the cursor in 4 directions, Includes:, 12ZH 12-Channel Transmitter,
Futaba 12Z 12-Channel PCM G3 2048 Radio System w/R6014HS 2.4GHz ...5 Reviews
HobbyKing
X8D 2.4GHZ TRAINER PORT X8-HACK MODULE (PPM ONLY)
PPM transmitter to 2.4Ghz with ..." />
| Range | 800m+ |
Channels:8,
Now you can convert any PPM transmitter to 2.4Ghz with ...5 Reviews
HobbyKing
PPM ENCODER MODULE HKPILOT 32
PPM encoder allows you to connect your PWM-only RC ..." />
,
The PPM encoder allows you to connect your PWM-only RC ...HobbyKing
CORONA R8FA 2.4GHZ FASST COMPATIBLE RECIVER
| Operating Voltage | 4.0 ~10V |
| Sensitivity | ~ -96dBm |
| Size | 55x33x14mm |
| Weight | 16.8g |
| Antenna length | 136mm |
Specs:, Operating Current:, 70mA @ FASST 7ch mode normal and 110 mA max,, Latency:, 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,, Fail Safe:, Yes (See manual in files tab),
Compatible with Futuba Fasst transmitters the Corona R8FA offers an ...5 Reviews
HobbyKing
CORONA R6FA 2.4GHZ FASST COMPATIBLE RECEIVER
| Operating Voltage | 3.6~10V |
| Operating Current | 50ma max |
| Sensitivity | ~ -100dBm |
| Size | 48x27x12mm |
| Weight | 11g |
| Antenna length | 142mm |
Channels:7, Latency:, 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode, Fail Safe:, Yes (See manual in files tab), FUTABA FASST 2.4GHz air and surface transmitters:, 3PM, 3PKS, 3VCS, 3GR, 4PK(S), TM7, TM8, TM10, TM14, T6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG.,
Compatible with both air and surface Futaba 2.4Ghz FASST transmitters, ...5 Reviews
HobbyKing
CORONA R4FA 2.4GHZ FASST COMPATIBLE RECEIVER
| Operating Voltage | 3.6~10V |
| Operating Current | 50ma max |
| Sensitivity | ~ -100dBm |
| Size | 41x21x8mm |
| Antenna length | 142mm |
Channels:4, Latency:, 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode, Fail Safe:, Yes (See manual in files tab), Weight:8g, FUTABA FASST 2.4GHz air and surface transmitters:, 3PM, 3PKS, 3VCS, 3GR, 4PK(S), TM7, TM8, TM10, TM14, T6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG.,
Compatible with both air and surface Futaba 2.4Ghz FASST transmitters, ...5 Reviews
HobbyKing
CORONA R14FA 2.4GHZ FASST COMPATIBLE RECIVER
| Operating Voltage | 4.0 ~10V |
| Sensitivity | ~ -96dBm |
| Fail Safe | Yes |
| Size | 53x37x16mm |
| Weight | 22g |
| Antenna length | 136mm |
Specs:, Operating Current:, 70mA @ FASST 7ch mode normal and 110 mA max,, Latency:, 7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,, Compatibility:, FUTABA FASST 2.4GHz transmitters,
Compatible with Futuba Fasst transmitters the Corona R14FA offers an ...5 Reviews
HobbyKing
BA-4-IN-1CX MIXERBOARD (72MHZ SINGLE CONVERSION)
| Main ESC Output Current | 5A (Min.)/15A (Max.) |
| Tail ESC Output Current | 5A (Min.)/15A (Max.) |
| 5V Max. Output (BEC) Current | 1.5A |
| Receiver system | FM PPM |
| Effective receiving range | 200m |
| Size | 25mm*18mm*24mm |
5 Reviews
HobbyKing
TURNIGY 9XR TRANSMITTER MODE 1 (NO MODULE)
| Online support and user forums available at | www.turnigy9xr.com |
| Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD (Backlit) |
| Support Type | Heli/Acro/Glid |
| Stick modes | 1, 2, 3, 4 |
| Encoder type | ppm/pcm |
| Module Interface | JR Compatible |
| Simulator Interface | Yes (JR & Futaba) |
| Buzzer | Yes |
| Battery Compartment | 112 x 44 x 27mm |
| Weight (less battery & Rf Module) | 723g |
| Required | Battery 3S Lipo |
9XR Standard Features:, • 8 Channel PPM/9 Channel PCM, Spec:, Model Memory:16, Included:, Turnigy 9XR Transmitter (Mode 1 – Throttle on Right Stick), Note:, This version is supplied without an RF Module, Please order the relevent RF module from the accessories list below.,
The greatly anticipated Turnigy 9XR has arrived! The software for ...5 Reviews
HobbyKing
TURNIGY 9XR TRANSMITTER MODE 2 (NO MODULE)
| Online support and user forums available at | www.turnigy9xr.com |
| Channnel | 8ch ppm/9ch pcm |
| Display | 128*64LCD (Backlit) |
| Support Type | Heli/Acro/Glid |
| Stick modes | 1, 2, 3, 4 |
| Encoder type | ppm/pcm |
| Module Interface | JR Compatible |
| Simulator Interface | Yes (JR & Futaba) |
| Buzzer | Yes |
| Battery Compartment | 112 x 44 x 27mm |
| Weight (less battery & Rf Module) | 723g |
| Required | Battery 3S Lipo |
9XR Standard Features:, • 8 Channel PPM/9 Channel PCM, Spec:, Model Memory:16, Included:, Turnigy 9XR Transmitter (Mode 2 – Throttle on Left Stick), Note:, This version is supplied without an RF Module, Please order the relevent RF module from the accessories list below.,
The greatly anticipated Turnigy 9XR has arrived! The software for ...5 Reviews
HobbyKing
SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM
| Dimensions control unit | 34x23.8x11mm |
| Dimensions sensor | 20.6x20.6x9.6mm |
| Sensor lead | 160mm length |
| Standard setup | DataPod |
| Computer connectivity | DataPod Bridge Mode |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <100mA |
Features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,
Designed for 3D Pro pilots and beginner alike the Vortex ...HobbyKing
SPARTAN VORTEX VX1 FLYBARLESS HELICOPTER CONTROL SYSTEM W/DATAPOD
| Dimensions control unit | 34x23.8x11mm |
| Dimensions sensor | 20.6x20.6x9.6mm |
| Sensor lead | 160mm length |
| Standard setup | DataPod |
| Computer connectivity | DataPod Bridge Mode |
| Operating voltage | 3.8V to 8.4V |
| Current draw | <100mA |
Key features:, • Designed for all helicopters; from the smallest electric to the largest nitro, Specs:, Weight:, 14g (combined control unit & sensor), Sensor Type:, Balanced ring MEMS with digital interface, Governor:, Selectable Nitro or Electric, Control system:, Proprietary PID with adaptive tuning, Supported tail servos:, Digital 760us, 960us and 1520us centre pulse, Supported swash servos:, Digital or analog 1520us centre pulse, Supported receivers:, Standard pulse, PPM, SBUS, 1/2 Satellites, Box contents:, Spartan VX1 control unit,
Designed for 3D Pro pilots and beginner alike the Vortex ...HobbyKing
WALKERA RC MAGIC CUBE MTC-01 DEVENTION TRANSMITTER MODULE FOR WK/ANDROID
| Features | • Compact size |
| Frequency | 2.4GHz FH |
| Output Power | Less than 10mW |
| Overall Unit Current | Less than 35mA |
| Battery | 3.7V 80mAh |
| Weight | 10g |
Specs:, Includes:, Walkera RC Magic Cube, *Note:, Trainer port must be capable of outputing PPM signal.,
The RC Magic Cube allows you to use any transmitter ...5 Reviews
HobbyKing
ORANGERX DSMX/DSM2 2.4GHZ DIY TRANSMITTER MODULE
| • 4 operating modes | DSM2 1024/22ms, DSM2 2048/11ms, DSMX 22ms, DSMX 11ms |
| 2.4Ghz protocol | DSMX/DSM2 |
| Voltage input | 6~15VDC |
| Power | 100mW |
| Range | Full range system |
Features:, Specs:, Compatibility:, Any transmitter with a PPM signal output, Includes:, OrangeRX DSMX/DSM2 2.4Ghz DIY transmitter module, NOTE:, 1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance,
The OrangeRX DSMX/DSM2 2.4Ghz DIY transmitter module offers a simple ...5 Reviews