HobbyKing
2.4GHZ SUPERMICRO SYSTEMS - HK-MFX600-H (HITEC COMPATIBLE)
Frequency | 2.4ghz |
Type | FHSS |
Module Type | Hitec |
Transmission Power | 18DBm |
Input Signal | PPM (50mv or 2~5v) |
Input Voltage Range | 5.0~12.0V |
Weight | 42.5g |
Size:, 58.15mm x 37.26mm x 22.05mm,
Perfect for indoor flyers and anyone who likes to tinker ...5 Reviews
HobbyKing
TURNIGY 7 IN 1 MEGA METER BATTERY CHECKER/WATT METER/SERVO TESTER
Weight | 85g |
LCD Screen Size | 52mm x 30mm |
Max Input Voltage | 60v |
Voltage Display Resolution | 0.001v |
Max Current | 100A |
Shunt Resistance | 0.001ohm |
Displayed Resolution A | 0.01 |
PPM Signal Output | 750uS ~ 2150uS |
Prop Blade Measuring Range | 1~5 |
Prop RPM Range | 1~60,000 RPM |
Includes | Instructions |
Functions:, Battery Cell/Voltage Checker, Specs:, Dimensions:, 95.3mm x 72.8mm x 21.5mm, Temperature Resolution:, 1 Celsius / 1 Farenheit,
Turnigy 7 in 1 Mega Meter - Battery Checker/Watt Meter/Servo ...5 Reviews
HobbyKing
FMA 4-CHANNEL CO-PILOT FLIGHT STABILIZATION SYSTEM W/PROGRAMMER
CPII Computer Module | 19g |
Power Source | System is powered from your radio's receiver. |
Size:, CPII Computer Module (LxWxH):, 44.55 x 28.32 x 11.68mm, CPII Main Sensor (LxWxH):, 24.51 x 24.51 x 9.14mm, CPII Vertical Sensor (LxWxH):, 24.51 x 17.80 x 9.14mm, IRNet Router (LxWxH):, 30.60 x 25.52 x 13.51mm (not including mount tabs), Weight:, CPII Main Sensor:7g, CPII Vertical Sensor:5g, IRNet Router:8g, Ratings:, System will operate on normal R/C voltage range of approximately 3.5v to 6v., Outputs:, Please be advised the CPII systems are designed to fit small helicopters without any additional components. For lager heli's and/or fixed wing aircraft, you may require standard aileron extensions for optimal placement of vertical and/or main sensors., Applications:, Adds safe and effective flight stabilization to any R/C model aircraft for assistance in learning new aerobatic manuevers, protecting your investment in case of electronic or mechanical failure, and assisting modelers of all experience and skill levels to just feel more confident when flying., Radio:, The Co Pilot 2 is not an RF device and therefore it will operate with any type or brand of R/C radio system including AM, FM/PPM, PCM on any frequency as well as all 2.4GHz spread spectrum systems., Features:, Co Pilot II includes embedded stick priority with adjustable gain which contributes to a super-natural flying "feel",
The NEW Co Pilot II system represents the culmination of ...5 Reviews
HobbyKing
RMILEC TS4047 10CH 2.5W UHF MODULE SYSTEM W/RECEIVER (JR MODULE)
Hardware frequency Range | 400MHz to 470MHz |
Frequency stability | 2.5ppm |
Output low-pass Filter | NONE |
Frequency Range | 415Mhz-445Mhz |
Step frequency | 480Khz |
Step frequency | 30Khz |
Low rate | 40Hz @10Kbps |
High rate | 66Hz @15Kbps |
RF interface impedance | 50 Ohm |
Supply Voltage | 8.4V to 16V |
Reverse battery protection | NONE |
Logic Voltage | 3-12V |
Frequency Range | 400MHz to 470MHz |
F/S turn on condition | >0.99EBR |
Antenna gain | 2.15DBM |
Refresh rate | 40Hz |
Hopping rate | 40Hz |
Hopping cycle | 13Hz |
Recover time | 77mS |
Refresh rate | 66Hz |
Hopping rate | 66Hz |
Hopping cycle | 22Hz |
Recover time | 45mS |
Response Time | 4mS to 25mS |
PWM Output range | 0.5mS-2.5mS |
Recommend Supply Voltage | 3.5V to 8.4V |
Shutdown voltage | 3 V |
Damage voltage | >15V |
Reverse breakdown voltage | >-15V |
Output ports withstand voltage | >12V |
Normal Current | <60mA |
Operating Temperature | –40 to +80 °C |
Low frequency Power supply noise filter | Include |
High frequency noise filter | Include |
Included in box:, TS4047 transmitter module (JR style), TS4047 Module Specifications:, Channel :70, Frequency Range:, 433.05MHz -434.79MHz, Channel:70, Low Output Power:, 30DB -31DB Peak (0.9W-1.2W), High Output Power:, 33DB -34DB Peak (1.9W-2.5W), Current:, 330mA/520mA (@50 Ohm load,12V Supply Voltage), Temperature:, 50 to 70 Degrees Celsius, RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz@Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V),
The RMILEC TS4047 10CH 2.5W UHF Module System offers the ...5 Reviews
HobbyKing
HOBBYKING I86 MULTI-ROTOR CONTROL BOARD
The Hobbyking i86 Multi-Rotor Control Board supports | Aero (fixed wing) |
Input Voltage | 4v to 6v |
Input signal | 50hz standard PPM |
PWM Frequency | 400hz for ESC, 50hz for servos |
Gyro scale | +/- 500dps, ODR |
Operating temp | -40° C to 85° C |
Size | 40mm x 40mm |
Specs:, Weight: 8g,
Controlled by an Atmel Mega168PA 8-Bit RISC based micro controller ...5 Reviews
HobbyKing
TURNIGY GTX3 AFHDS 2.4GHZ 3 CHANNEL RADIO SYSTEM
RF Type | 2.4Ghz AFHDS |
Bandwidth | 500Hz |
RF power | less than 20DB |
Sensitivity | 1024 |
Low Voltage Warning | Yes (less than 9V) |
Fail Safe | Yes |
DSC Port | Yes (3.5mm PPM) |
Charging Port | Yes |
Power | 12V DC (1.5AA x 8) |
Weight | 395g |
Specs:, Channels:3, Programing Options:, Model Memory (10 Models), Includes:, Turnigy GTX3 Transmitter,
The much-anticipated and exclusive Turnigy GTX3 AFHDS 2.4ghz 3 Channel ...5 Reviews
HobbyKing
TURNIGY 9X 9CH TRANSMITTER WITHOUT MODULE (MODE 2) (V2 FIRMWARE)
Number of Channnel | 8ch ppm/9ch pcm |
Display | 128*64LCD |
Support Type | Heli/Acro/Glid |
Encoder type | ppm/pcm |
Subtrim | Yes |
Simulator Interface | Yes |
Buzzer | Yes |
Low Voltage Show | Yes |
Required | Battery, Module, RX |
Support user:8, Stick model:4, Included:, Turnigy 9x 9Ch Transmitter only, Note:, The retail price of this radio is close to the original 9X with module and Receiver due to supply and demand. As this version is manufactured in much smaller quantities the cost price increases. This version of 9x is offered by request from customers wishing to use their own choice of module and receiver without the hassle of removing the module and wire from the original 9X.,
Due to popular demand, the Turnigy 9X is now available ...5 Reviews
HobbyKing
TURNIGY 9X 9CH TRANSMITTER WITHOUT MODULE (MODE 1) (V2 FIRMWARE)
Number of Channnel | 8ch ppm/9ch pcm |
Display | 128*64LCD |
Support Type | Heli/Acro/Glid |
Encoder type | ppm/pcm |
Subtrim | Yes |
Simulator Interface | Yes |
Buzzer | Yes |
Low Voltage Show | Yes |
Required | Battery, Module, RX |
Support user:8, Stick model:4, Included:, Turnigy 9x 9Ch Transmitter only, Note:, The retail price of this radio is close to the original 9X with module and Receiver due to supply and demand. As this version is manufactured in much smaller quantities the cost price increases. This version of 9x is offered by request for customers wishing to use their own choice of module and receiver without the hassle of removing the module and wire from the original 9X.,
Due to popular demand, the Turnigy 9X is now available ...5 Reviews
HobbyKing
HOBBYKING I86L MULTI-ROTOR CONTROL BOARD (LITE EDITION)
The Hobbyking i86L Multi-Rotor Control Board supports | Tri copter |
Input Voltage | 4v to 6v |
Input signal | 50hz standard PPM |
PWM Frequency | 400hz for ESC, 50hz for servos |
Gyro scale | +/- 500dps, ODR |
Operating temp | -40° C to 85° C |
Size | 40mm x 40mm |
Specs:, Weight: 8g,
Hobbyking i86L Multi-Rotor Control Board (Lite Edition) features the same ...5 Reviews
HobbyKing
RMILEC RD4047P 10CH UHF RECEIVER (SUITS TS4047 TX MODULE)
Frequency Range | 400MHz to 470MHz |
F/S turn on condition | >0.99EBR |
Antenna gain | 2.15DBM |
Refresh rate | 40Hz |
Hopping rate | 40Hz |
Hopping cycle | 13Hz |
Recover time | 77mS |
Refresh rate | 66Hz |
Hopping rate | 66Hz |
Hopping cycle | 22Hz |
Recover time | 45mS |
Response Time | 4mS to 25mS |
PWM Output range | 0.5mS-2.5mS |
Recommend Supply Voltage | 3.5V to 8.4V |
Damage voltage | >15V |
Reverse breakdown voltage | >-15V |
Output ports withstand voltage | >12V |
Normal Current | <60mA |
Operating Temperature | –40 to +80 °C |
Low frequency Power supply noise filter | Include |
High frequency noise filter | Include |
RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC RD4047P 10CH UHF receiver offers the ultimate in ...HobbyKing
RMILEC TS4047 10CH 2.5W UHF MODULE SYSTEM W/RECEIVER (FUTABA MODULE)
Hardware frequency Range | 400MHz to 470MHz |
Frequency stability | 2.5ppm |
Output low-pass Filter | NONE |
Frequency Range | 415Mhz-445Mhz |
Step frequency | 480Khz |
Step frequency | 30Khz |
Low rate | 40Hz @10Kbps |
High rate | 66Hz @15Kbps |
RF interface impedance | 50 Ohm |
Supply Voltage | 8.4V to 16V |
Reverse battery protection | NONE |
Logic Voltage | 3-12V |
Frequency Range | 400MHz to 470MHz |
F/S turn on condition | >0.99EBR |
Antenna gain | 2.15DBM |
Refresh rate | 40Hz |
Hopping rate | 40Hz |
Hopping cycle | 13Hz |
Recover time | 77mS |
Refresh rate | 66Hz |
Hopping rate | 66Hz |
Hopping cycle | 22Hz |
Recover time | 45mS |
Response Time | 4mS to 25mS |
PWM Output range | 0.5mS-2.5mS |
Recommend Supply Voltage | 3.5V to 8.4V |
Damage voltage | >15V |
Reverse breakdown voltage | >-15V |
Output ports withstand voltage | >12V |
Normal Current | <60mA |
Operating Temperature | –40 to +80 °C |
Low frequency Power supply noise filter | Include |
High frequency noise filter | Include |
Included in box:, TS4047 transmitter module (Futaba style), TS4047 Module Specifications:, Channel :70, Frequency Range:, 433.05MHz -434.79MHz, Channel:70, Low Output Power:, 30DB -31DB Peak (0.9W-1.2W), High Output Power:, 33DB -34DB Peak (1.9W-2.5W), Current:, 330mA/520mA (@50 Ohm load,12V Supply Voltage), Temperature:, 50 to 70 Degrees Celsius, RD4047P Receiver Specifications:, Sensitivity :, -112 DBM @0.1EBR(40Hz Refresh rate)(10Kbps low rate ), PWM Output accuracy:, 0.5uS step ERROR<20PPM, PWM output cycle:, 55Hz @Normal mode / 192Hz @Fast mode, PPM Output accuracy:, 0.5uS step ERROR<20PPM, PPM Output range:, 0.5mS-2.5mS Each channel, PPM output cycle:, 50Hz @ Normal mode & 1mS to 2mS Output, PPM sync pulse width:, 4mS to 16mS Automatic adjust @Normal mode / 4mS unchanging @Fast mode, RSSI output range:, 0-3.3V (RF signal weak <0.8V), Shutdown voltage:3V,
The RMILEC TS4047 10CH 2.5W UHF Module System offers the ...HobbyKing
ZYX-GS CAMERA GIMBAL STABILIZATION SYSTEM 3-AXIS GYRO/ACCELEROMETER
Weight | 26g |
Supported RC | PPM/PCM/2.4G |
Operating supply | DC3.5V~9V |
Operating current | 60mA |
Operating temperature | -15º~65º |
Max angular rate | 2000º/sec |
Max acceleration | 16g |
Refresh rate | 800Hz |
Features:, • Three axis MEMS gyro and accelerometer stabilization (pan/tilt/roll), Specs:, Size:, 38x29x13mm / 27x27x9mm, Control range:, -45º~45º (roll), -180 º ~180 º (pan), -135º~90º (tilt),
The all new ZYX-GS precision gimbal stabilization system provides dedicated ...5 Reviews
HobbyKing
DENSION WIFI RC RECEIVER SYSTEM FPV FOR YOUR IPHONE, IPOD, IPAD AND ANDROID
iPhone 4S, 4, 3Gs and 3G (minimum iOS version | 4.0) |
Dimensions | 44x28x18mm |
Power supply | 6~16V |
Video resolution | 325x288 (CIF) |
Frame rate | 15 FPS |
Power consumption | 100mA @ 6V idle, |
Package contents | WiRC control panel |
Features:, • 8 PPM output channels for Servo or ESC control, Compatible with the following devices:, Technical specs:, Add new applications to the embedded Linux operating system of your WiFi RC. No-one has an FTP server on wheels yet :),
The Dension WiFi RC is a plug & play wireless ...HobbyKing
HOBBYKING POCKET QUAD ULTRA-MICRO DSM2 MULTIWII QUADCOPTER (PNF)
Features | • Ultra-micro size |
CPU Speed | 16MHz |
PPM Receiver Support | Yes |
DSM2 Satellite Support | Yes (included) |
Propeller Size | 45mm (included) |
Dimensions | 70x70x9mm |
Included | Pocket Quad frame |
*Note:, The Pocket Quad requires assembly. It is not ready to fly out of the box, though all necessary components are included for use with any 4CH or more DSM2 transmitter., Specs:, Flash Size:, 32kB (3.3kB taken by the Bootloader), Inputs:, 5 high-res RX inputs (1 x AUX channel), Weight:, 30g (w/receiver and battery), Required:, Your own 4CH DSM2 transmitter,
The HobbyKing Pocket Quad truly is an ultra-micro quadcopter unlike ...5 Reviews
HobbyKing
MINI MWC FLIGHT CONTROL BOARD AND DSM2 RECEIVER ACC/GYRO/BARO/MAG
The following functions can be realized through the MINI MWC flight control board | -Auto stabilization |
Size | 47.7X23.5X11mm |
Weight | 7.8g |
Working voltage | 5-8.4V |
Features:, • 7CH DSM2 Compatible Receiver (PPM SUM), MINI MWC flight board supported modes:, -GIMBAL-individual cradle head stabilization, Options not included:, (Stock will be coming soon), Specs:,
The New Mini MWC flight control board is milestone in ...