ngHobbies
PANASONIC 5.5V ULTRACAP
Lead spacing | 10mm |
Capacitance | 100mF |
Voltage Rated | 5.5V |
Mounting type | Through hole |
Weight | <2gr. |
http | //www.rcgroups.com/forums/showthread.php?t=1352016#post16772751 |
http | //vimeo.com/17624106 |
Datasheet:, , This can be used for the Tinytelemetry mod posted here:, Mod video and results:,
This little Utracap can keep your GPS warm during battery ...ngHobbies
TRANSMITTER HARNESS FOR 900MHZ, 1.2GHZ AND 1.3GHZ TRANSMITTERS
This FPV cable harness offers connection breakout for the folowing types of transmitters:, 900Mhz 800mW, Instructions:, Plug the white connector end to the connector coming out from the transmitter and supply power through the red JST type connector., Connector 1 (Video):, , Connector 2 (Audio):, , Connector 3 (Battery):, Red - Battery positive lead,
1.3GHz 400mW 1.3GHz 800mW 1.3GHz 1500mW LawMate 2.4GHz 1000mW LawMate ...ngHobbies
GOPRO HD (1 & 2) FPV IMMERSIONRC CABLE
feed from a GoPro Hero HD camera to an Immersion RC video transmitter. The 2.5mm right angle jack fits the GoPro Hero cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection,
This cable offers FPV stereo audio and video Red - ...ngHobbies
11 DBI 5.8GHZ FLAT PATCH ANTENNA
Datasheet:, Click me, This patch antenna comes without antena cable. Please add your cable clicking on the following link:, SMA male to SMA male cable,
5.8 GHz UNII Applications 5.8 GHz ISM Applications 5.8 GHz ...ngHobbies
CONNECTOR CABLE SET IMMERSION RC
Audio/Video Pigtail:, Black - Ground -, Power Connector Pigtail:, Black - Ground -,
This is a replacement cable set for the Immerion RC ...ngHobbies
TWO WAY SLR REMOTE SHUTTER
http | //www.doc-diy.net/photo/remote_pinout/ |
- Canon | XTi, T2i, EOS 350D, 400D, 450D, 500D, 550D and the 60D |
- Canon | EOS 10D, 20D, 30D, 40D, 50D, 5D, 5Dmk2, 7D and all types of the 1D |
- Nikon | all SLR types |
<a href=http | //vimeo.com/46259860>SLR Remote Shutter Demo<a href=http |
To connect it to yourt SLR camera just use one of the cables supplied by us (sold separately) or make your own cable matching your camera usingthe instructions from here:, Compatible with:, Manual:, Click here to download the Setup and configuration manual, Demo video:,
This new device will allow the aerial photographer to trigger ...ngHobbies
700 LINE EFFIO CAMERA (NTSC)
Imaging | 1/3" SONY CCD EXviewHAD CCDII |
Number of Pixels | NTSC |
Horizontal Resolution | 700 TV Line |
Dynamic Range | >50dB |
Minimum Illumination | 0.01 Lux/F1.2 |
OSD menu | Yes |
Power | 5-15V±10% DC @ 150mA |
Dimension | 28 X 28mm |
Weight | 36g |
Scanning System: 2:1 Interlace, Shipping with: f: 3.6mm mini lens, Demo Video:, Click Here,
OSD Cable included along with the stantard Video CablengHobbies
RUBBER EYEPATCH FOR EVG920
,
This is a replacement rubber eyepatch for the EVG922 video ...ngHobbies
16MM WIDTH 4MIL CLEAR HEATSHRINK
wall thickness | 4mil = 0.004inch |
flat width | 16mm |
diameter before shrinking | 0.40 inch |
diameter after shrinking | min |
material | polyolefin |
Technical parameters:, 2:1 Shrink Ratio (shrinks to 55% its original diameter),
This is a 1 meter piece of ultra thin wall ...ngHobbies
RADIAN FPV PAN/TILT POD KIT
Comes with a mounting plate that will fit many popular FPV cameras including | KX131, KX171, KX191, IF Cam, SN777, SN555 and many others |
Instructions to build the pan and tilt | Coming Soon |
Note:, careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include*:, Laser cut components for the main pod, You'll need to supply:, Double sided servo tape to apply TX, camera, and tilt servo., Documentation:,
The Radian FPV pod that uses a custom mechanism allowing ...ngHobbies
BLUEBEAM WHIP 1.3GHZ ANTENNA PAIR
Package Contains:, 1 x 3 lobe transmitter antenna,
The BluBeam whip antenna set is mounted on a small ...