HiModel
35MHZ CORONA SYNTHESIZED 4CH RECEIVER (SINGLE CONVERSION) RP4S1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (single conversion), , Type, , RP4S1, , Size, , 42.5x18.2x9.36mm, , Weight, , 6.6g, , Sensitivity, , better than 2.0μv, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-4, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 pole ceramic filter, , Filtering, , DSP filtering with mild algorithm, , Shift Polarity, , Positive or Negative(auto-detect), , Case, , Shrink wrap, , operating voltage, , 4.8V～6.0VDC, , operating current, , 17mA, , Modulate, , FM/PPM, , Range, , >1.2km/3900ft, , Filtering, , DSP, , Crystal size, , UM-5, , Intermediate Frequency, , 455KHZ, , IP3, , +9dBm, , *This is not a full range receiver, and only suggested to use for small electric models like park flyers etc., , ,
Features: The smallest synthesized receiver in the R/c world Corona ...2 Reviews
HiModel
40MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...HiModel
72MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
| Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...3 Reviews
HiModel
40MHZ CORONA SYNTHESIZED 6CH FUTABA/JR COMPATIBLE RECEIVER (DUAL CONVERSION) RP6D1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (Dual conversion), , Type, , RP6D1, , Size, , 28.5X15X7.4, , Weight, , 8.6g, , Range, , >1.5km/4900ft, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-6, , Filtering, , DSP, , Intermediate Frequency, , 10.7MHZ, , IP3, , +10dBm, , * Compatible with both Futaba & JR transmitters., , ,
Features: ● You can switch the frequency freely with the ...1 Reviews
HiModel
35MHZ CORONA SYNTHESIZED 8CH FUTABA/JR COMPATIBLE RECEIVER (DUAL CONVERSION) RP8D1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (Dual conversion), , Type, , RP8D1, , Size, , 36X18.7X8.2, , Weight, , 9.2g, , Range, , >1.5km/4900ft, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-8, , Filtering, , DSP, , Intermediate Frequency, , 10.7MHZ, , IP3, , +10dBm, , * Compatible with both Futaba & JR transmitters., , ,
Features: ● You can switch the frequency freely with the ...HiModel
41MHZ CORONA SYNTHESIZED 8CH FUTABA/JR COMPATIBLE RECEIVER (DUAL CONVERSION) RP8D1
, , , , , , Specifications:, , , , , , , , , , , Synthesized Receiver (Dual conversion), , Type, , RP8D1, , Size, , 36X18.7X8.2, , Weight, , 9.2g, , Range, , >1.5km/4900ft, , Selectivity, , ±8 kHz at 65 dBdown, , Number of Channel, , 1-8, , Filtering, , DSP, , Intermediate Frequency, , 10.7MHZ, , IP3, , +10dBm, , * Compatible with both Futaba & JR transmitters., , ,
Features: ● You can switch the frequency freely with the ...HiModel
CORONA 58G/ 10KG.CM/ .20 SEC DIGITAL METAL GEAR SERVO DS-558MG
, , , , , , Specifications:, , , , , , , , , , , Item No： DS558MG, Size： 20x40x38.5mm(0.78"x1.57"x1.51"), Weight： 58g, Operating Voltage： 4.8V / 6.0V, Operating Current ： 300mA / 400mA, Operating speed ： 0.22sec.60o/ 0.2sec.60o, Stall torque ： 9.4kg.cm / 10kg.cm, Dead band ： ≤3uSec, Operating speed ： 40o/one side pulse traveling 400us, Potentiometer： 5 slider/Indirect Drive, Ball bearing ： MR106, Gear ： Metal, Connector wire length： 215mm, Operating Temperature Range： -20 ℃ to +60℃, , ,
Includes/Requires: Includes: 1 x digital servo with servo hornsHiModel
CORONA 12.5G/ 2.5KG/ .14 SEC DIGITAL MICRO SERVO DS939MG
| Type | DS939MG |
| Size | 22.5X11.5X24.6mm(0.88"x0.45"x0.96") |
| Weight | 12.5g |
| Operating voltage | 4.8V~6.0V |
| Operating current | 200mA |
| Operating speed | 0.14sec/60º |
| Stall torque | 2.5kg.cm |
| Dead band | ≤3uSec |
| traveling range | 40º one side pulse traveling 400μs |
| Ball bearing | MR85 |
| Connector wire length | 215mm |
| Temperature | -20 ℃ to +60℃ |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x digital servo with servo hornsHiModel
XQ-POWER 56G/ 14.5KG/ .11 SEC TITANIUM GEAR DIGITAL SERVO S4013D
| Type | XQ-S4013D |
| Weight | 56 grams |
| Torque | 12.5 (kg.cm, VCC=6.0V); 14.5(kg.cm, VCC=7.2V) |
| Speed | 0.13 (sec/60°) at 6.0V; 0.11(sec/60°) at 7.2V |
| Voltage | 6.0V/ 7.2V (Voltage can not higher than 7.2V, 2S Lipo is NOT supported) |
| Dimension | 40.1x 20.1 x 36.5 mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Digital servos features:Titanium Gear; Waterproof; Plastic case, resist heat ...HiModel
XQ-POWER 56G/ 16.9KG/ .11 SEC TITANIUM GEAR DIGITAL SERVO S4116D 7.2-8.5V
| Type | XQ-S4116D |
| Weight | 56 grams |
| Torque | 14.8 (kg.cm, VCC=7.2V); 16.9(kg.cm, VCC=8.5V) |
| Speed | 0.13 (sec/60°) at 7.2V; 0.11(sec/60°) at 8.5V |
| Voltage | 7.2V/ 8.5V |
| Dimension | 40x 20 x 39 mm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Support high voltage; Titanium Gear; Waterproof; Plastic case, resist ...HiModel
GN 3.9G/ 0.8KG/ 0.09SEC MICRO SERVO D531BB
| Torque | 0.7kg.cm @4.8V; |
| Static pull | 0.8kg.cm (12.65 oz.in)@4.8V |
| Speed | 0.09sec/60degrees@4.8V |
| Current | Idle |
| Dimension | 19x19.5x8mm |
| Weight | 3.9g |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: - (One) ball bearing - Compatible with gyro DS ...1 Reviews
HiModel
28G/ 3.5KG/ .07 SEC METAL GEAR DIGITAL SERVO MD-732 (ALTERNATIVE FOR FUTABA 9257)
| Dead band width（usec） | ≤3usec |
, , , , , , Specifications:, , , , , , , , , , , SPECIFICATION：, Type： MD732, Operating voltage range（V）： 4.5V-6.0V, Operating temperature range（℃）： -20℃~ +60℃, Operating speed 0.09 sec/60°（sec/60° 4.8V）, 0.07 sec/60°（sec/60° 6.0V）, Torque 3.0 Kg·cm（Kg·cm 4.8V）, 3..5 Kg·cm（Kg·cm 6.0V）, Midpoint pulse： 1520us broadband, Maximum rotation angle： ±65°, Motor： Five-poles coreless cup, Size（mm）： 35.0 × 15 × 29.2mm, Weight（g）： 28g, Gear material： 6 metal gears, Connector wire length（cm）： 21cm, , ,
Features: Henge MD732 digital servos have following technique characteristics: 1. ...HiModel
XQ-POWER 56G/10KG/ .14SEC 6-7.2V METAL GEAR DIGITAL SERVO XQ-S3009D
| Type | XQ-S3009D |
| Speed | 0.16 sec/60° @ 6V; 0.14 sec/60° @ 7.2V |
| Torque | 9kg-cm @ 6V; 10kg-cm @ 7.2V |
| Weight | 56g / 1.46oz |
| Power Supply | 6V/ 7.2V |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , * The image is for reference only, the real type is S3009D., Dimension (mm): A: 40.8, B: 20.1, C: 38, D: 48.5, E: 10, , ,
Includes/Requires: Includes:1 x servo 1 x servo horn setHiModel
CORONA 12.5G/ 2.5KG/ .14 SEC METAL GEAR MICRO SERVO CS-939MG
| Type | CS-939MG Analog |
| Size | 22.5X11.5X24.6mm(0.88"x0.45"x0.96") |
| Weight | 12.5g |
| Operating voltage | 4.8V~6.0V |
| Operating speed | 0.14sec/60º |
| Stall torque | 2.5kg.cm |
| Gear Material | Metal |
| Connector wire length | 215mm |
| Temperature | -20℃～+60℃ |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x servo with servo horns1 Reviews
HiModel
POWERHD 4.4G/0.6KG/ .10SEC HIGH PERFORMANCE MICRO SERVO HD-1440A
| Speed | 0.10 sec/60° @ 6V |
| Torque | 0.6kg-cm @ 6V |
| Dimensions | 20 x 19.6 x 8 mm |
| Weight | 4.4g |
| Connector type | JR/Futaba compatible |
, , , , , , Specifications:, , , , , , , , , , , Power Supply: 6V, , ,
Features: The is the new Power HD high performance analog ...