HiModel
FRSKY 2.4G 7-CHANNEL FUTABA FASST COMPATIBLE TF RECEIVER TFR6
Operating Voltage Range | 3.5V~10V |
Dimension | 37x22x8mm |
Weight | 7.8g |
, , , , , , Specifications:, , , , , , , , , , , Number of Channels: 7, , ,
Features: FrSky 2.4G 7-channel Futaba FASST Compatible TF Receiver TFR6 ...HiModel
2.4G CORONA DSSS 14-CHANNEL RF MODULE & RX SYSTEM FOR FUTABA TRANSMITTER (RF CT14F, RX CR14)
Type | CT14F DSSS |
Size | 54X30X25MM |
Weight | 27g |
Operating voltage | 5V (Futaba) |
Operating current | 150mA |
Compatible with | FUTABA |
Type | CR14 DSSS |
Size | 37.5X52.5X16MM |
Weight | 21g |
Range | >1500M |
Sensitivity | -100dbm |
Operating voltage | 4.8V-6V |
Operating current | 40mA |
Compatible with | CT14F |
, , , , , , Specifications:, , , , , , , , , , , RF Module Specs:, Output Power: , Receiver Specs:, Number of Channel: 14, , ,
Features: The new lightweight, advanced technology unit has the following ...6 Reviews
HiModel
2.4G 8-CHANEL CORONA MINI DSSS RECEIVER FOR CT8F/CT8J DSSS RF MOULES CR8D
Weight | 7g /0.25oz |
Size | 38/45L (without pin/with pins) x 22W x 12.5H mm |
, , , , , , Specifications:, , , , , , , , , , , *Note: This receiver is only compatible with Corona V2 RF modules CT8F/CT8J, and is not compatible with the old Corona RF modules., , ,
Features: Light weight, mini size 2.4G receiver from Corona. *Note: ...HiModel
WALKERA 2.4G 8-CHANNEL RECEIVER DEVO-RX802
Type | 2.4GHz 8 channels |
Sensitivity | -105dbm |
Frequency Interval | ≥ 4M |
Weight | 14.3g |
Dimension | 39X29X14.5mm |
, , , , , , Specifications:, , , , , , , , , , , WALKERA 2.4G 8-Channel Receiver DEVO-RX802, , ,
Features: 1).Adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) that features ...HiModel
WALKERA 2.4G 7-CHANNEL RECEIVER DEVO-RX701
, , , , , , Specifications:, , , , , , , , , , , WALKERA 2.4G 7-Channel Receiver DEVO-RX701, , ,
Includes/Requires: Includes: 1 x receiver DEVO-RX701HiModel
2.4G 9-CHANNLE DSM2 MICROLITE RECEIVER (JR/SPEKTRUM COMPATIBLE)
◆ Type | 9-Channel Full-Range DSM2 Receiver |
◆ Modulation | DSM2 |
◆ Band | 2.4GHz |
◆ Dimensions (W x Lx H) | 30 x 50 x 13mm |
◆ Weight | 19g |
◆ Voltage Range | 4-10v |
◆ Brown-Out Voltage | 4.0v (Always supply power above this voltage) |
◆ Antenna Length Main RX | 30mm (2) |
, , , , , , Specifications:, , , , , , , , , , , Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LED's should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., General Notes:, Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed., , ,
Features: JR/SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ...2 Reviews
HiModel
2.4G DSM2 SATELLITE RECEIVER FOR DSM29C
, , , , , , Specifications:, , , , , , , , , , , 2.4G DSM2 Satellite Receiver for, receiver DSM29C, , , ,
Includes/Requires: Includes: 1 x satellite receiver for receiver DSM29C *Plain ...HiModel
2.4G JR DSX9MK II 9-CHANNEL DSM2 RADIO (BACKLIGHT) W/RD921 RX (NO SERVO)
-Method | DSM2 |
-Number of Channels | 9Ch |
-Transmitter Weight | 810g (excluding battery) |
- Stick mode | mode 2 (throttle on left hand) will be sent by default, mode 1 is available upon request. |
, , , , , , Specifications:, , , , , , , , , , , * We only accept bank wire transfer (T/T) or western union money transfer for new customers for this product., *, Technical_hints_2.4G.pdf Technical hints on usage of 2.4G radios., , , ,
Features: JR Propo DSX9II Transmitter - Multi-Data Graphic Display with ...HiModel
FRSKY 2.4G ACCST/S-FHSS/A-FHSS COMPATIBLE 8-CHANNEL RECEIVER DELTA-8 (FUTABA, HITEC COMPATIBLE)
Dimensions | 36*17.5*8mm |
Weight | 3.5g / 2.7g (naked) |
Operating Voltage Range | 3.0~16.0V (HV version) |
Operating Current | 30mA |
, , , , , , Specifications:, , , , , , , , , , , FrSky modules, , How to put V8R4-II into binding mode respectively, , V8FT, V8JT, V8HT, , V8_Mode (Non-telemetry), , Connect battery to V8R4-II while holding the F/S button on V8R4-II, , DFT, DJT, DHT, DHT-U in V8_Mode, , (Switch 1 OFF and Switch 2 ON), , DFT, DJT, DHT, DHT-U in D_Mode, , (Switch 1 OFF and Switch 2 OFF), , D_Mode (Telemetry), , Connect Ch1 & Ch2 signal pins of V8R4-II by provided jumper and then, , connect battery to V8R4-II directly (no need to hold the F/S button on V8R4-II), , , ,
Features: THIS IS THE UPGRADED VERSION OVER V8R4. New feature ...HiModel
FRSKY 22G/ 2.6KG/ .12 SEC DIGITAL SBUS/ SBUS II COMPATIBLE SERVO D25MA
Specifications:, ,
Includes/Requires:HiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
GWS FM - TX & RX DUAL CONVERSION CRYSTAL 35.120MHZ CHANNEL 72
Frequency | 35.120Mhz |
Channel | 72 Ch. |
, , , , , , Specifications:, , , , , , , , , , , GWS FM - TX & RX Dual Conversion X'tal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal standard size 1 X ...HiModel
GWS FM - TX & RX DUAL CONVERSION CRYSTAL 35.180MHZ CHANNEL 78
Frequency | 35.180Mhz |
Channel | 78 Ch. |
, , , , , , Specifications:, , , , , , , , , , , GWS FM - TX & RX Dual Conversion X'tal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal standard size 1 X ...HiModel
HOBBYWING HEAD LOCK AVCS GYRO G3
1 Input | 4.5-6.5V, operating current = 50mA, maximum current |
2 Size | 26mm*24mm*9mm |
3 Weight | 12g |
Analog Servos (frequency 50Hz), servo neutral point | 1520us |
Digital Servos (frequency 333Hz), servo neutral point | 1520us |
Note | This gyro is not compatible with following servos |
, , , , , , Specifications:, , , , , , , , , , , Specification, 4 Suitable Servo:, Futaba- S9251, S9256, BLS251, JR-2700G, 8700G, 810G, 5 Accessories:, 2 pieces of adhesive foam pads, 1 piece of steel plate for vibration isolation, , ,
Features: 1 Dual working modes: Normal mode and Head-lock mode, ...HiModel
HIMODEL 40.735MHZ CHANNEL 56 FUTABA COMPATIBLE FM TRANSMITTER CRYSTAL HC-50U
Model | HC-50U (standard size) |
Frequency tolerance (at 25℃) | ±10.0ppm~±20.0ppm |
Working Temperature | -20℃ to +70℃ |
, , , , , , Specifications:, , , , , , , , , , , HiModel 40Mhz FUTABA Compatible FM Transmitter (TX) Crystal HC-50U, Compatible with nearly all Futaba transmitters using standard size crystals., Negative Shift for Futaba compatible dual conversion receivers., , ,
Features: Fully compatible and exchangeable with Futaba standard size transmitter ...