HiModel
HIMODEL 72.250 MHZ CH.23 FM FUTABA COMPATIBLE TRANSMITTER CRYSTAL TYPE HC-50U
Model | HC-50U (standard) |
Frequency tolerance (at 25℃) | ±3PPM to ±5PPM |
Working Temperature | -20℃ to +70℃ |
, , , , , , Specifications:, , , , , , , , , , , Compatible with nearly all Futaba transmitters and other Futaba compatible transmitters using standard size crystals., , ,
Includes/Requires: Includes:1 X Tx CrystalHiModel
HIMODEL 27.025MHZ FM FUTABA COMPATIBLE RECEIVER CRYSTAL (SINGLE CONVERSION)
Model | HC-50U (standard size) |
Mode of Vibration | FUND AT |
Working Temperature | -20℃ to +60℃ |
, , , , , , Specifications:, , , , , , , , , , , HiModel 27.025Mhz, FM, Futaba Compatible Receiver Crystals, Negative Shift for Futaba compatible receivers., single frequency conversion crystal., Note:, a. This is FM crystal, NOT AM crystal, check your crystal type before ordering., , ,
Includes/Requires: Includes:1 x RX Crystal (FM)HiModel
HIMODEL 35.060MHZ 66 CHANNEL FM FUTABA COMPATIBLE RECEIVER CRYSTAL HC-50U
Model | HC-50U (standard) |
Frequency tolerance (at 25℃) | ±3PPM to ±5PPM |
Working Temperature | -20℃ to +70℃ |
, , , , , , Specifications:, , , , , , , , , , , HiModel 35.060Mhz Ch.66 FM Futaba Compatible Receiver Crystals, Negative Shift for Futaba compatible receivers., single frequency conversion crystal., , ,
Includes/Requires: Includes:1 x RX crystalHiModel
HIMODEL 40.670 MHZ CH.67 FM FUTABA COMPATIBLE RECEIVER CRYSTAL TYPE HC-50U
Model | HC-50U (standard) |
Frequency tolerance (at 25℃) | ±3PPM to ±5PPM |
Working Temperature | -20℃ to +70℃ |
, , , , , , Specifications:, , , , , , , , , , , HiModel 40.670Mhz Ch.67 FM Futaba Compatible Receiver Crystals, Negative Shift for Futaba compatible receivers., single frequency conversion crystal., , ,
Includes/Requires: Includes:1 x Rx CrystalsHiModel
WFLY 72.870MHZ CH.54 FM DUAL CONVERSION RECEIVER CRYSTAL
Frequency | 72.870 Mhz |
Channel | 54 Ch. |
, , , , , , Specifications:, , , , , , , , , , , WFLY dual conversion FM (PPM) crystal, dual frequency conversion crystal., , ,
Includes/Requires: Includes: 1 x Rx Crystal mini sizeHiModel
GULANG SMM RATE GYRO TYPE KDS800
Model NO | KDS800 |
Weight | 24.5g /.86 oz (include wire and connectors) |
Dimensions | 28 x 28 x 20mm |
Operating voltage | +4.8 to +6V DC |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: THIS IS THE UPGRADING PRODUCT OF GM700 GYRO. ● ...HiModel
GULANG AVCS GYRO TYPE GM 730
Model NO | GM 730 |
Weight | 14.7g /.52 oz(include wire and connectors) |
Dimensions | 28 x 28 x 13mm |
Operating voltage | +4 to +6V DC |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: AVCS System: Since the rudder trim changes (caused by ...HiModel
FY21AP FPV INERTIAL ATTITUDE STABILIZER(TRADE EDITION) FY-21AP
Incorporating the AP117 OSD module transmits these parameters | *altitude |
Additional data can be interfaced to your PC via the Data Radio Link Module upgrade | *longitude |
Any other configuration, please e-mail us for enquiry | feiyudz@hotmail.com |
Includes | FY21AP (2.0) Module |
Features:, , In addition, barometric pressure data allows precise altitude hold capability. Beyond providing stabilization for the RC Pilot, under any flight conditions, connections to our other modules allow enhancements such as:, *auto-return to launch site, The FY-21AP can be installed in the following aircrafts:, Normal / Traditional fixed-wing planes, Remote Control system requirement:, The FY-21AP has been tested to work with the following RC systems:, Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems;, Includes/Requires:, , Resources:, Download Software and instruction manual.,
1. Briefly introduce The FY21AP is a stand-alone autopilot system ...HiModel
H TYPE SUPPORT FOR JR TRANSMITTERS (PLASTIC)
Features:,
H Type Support for JR Transmitters1 Reviews
HiModel
35MHZ CORONA 6CH RECEIVER (SINGLE CONVERSION) RS610Ⅱ
, , , , , , Specifications:, , , , , , , , , , , Size, , , 36*18.7*8.2mm, , , Weight, , 6.8g, , Sensitivity, , about 2.0μV, , Selectivity, , ±8kHz at 65dB down, , Number of channels, , 1-6, , Filtering, , Dual turned RF circuitry, , Filtering, , Dual 4 element ceramic filter, , Filtering, , DSP filtering in MCU with mild algorithm, , Shift polarity, , Positive or negative (auto-detect), , Case, , Shrink wrap, , Operating Voltage, , 4.8V~6.0VDC, , Operating Current, , 11mA, , Modulate, , FM/PPM(pulse position modulation), , , ,
Features: RS610II Receiver CORONA never stops improving the receiving range. ...HiModel
35MHZ CORONA 6CH FM DUAL CONVERSION DSP FUTABA & JR COMPATIBLE RECEIVER RS620Ⅱ
Compatibility | SAWAN , HITEC ,JR , FUTABA & WFLY etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications, Size 1.1”x0.6”x0.3”(28x15x7.6mm), Weight 0.17oz/4.7g(with shrink wrap), Sensitivity better than 2.0μV, Selectivity ±8kHz at 65dB down, Number of channels 1‐6, Filtering Dual turned RF circuitry, Filtering Dual 4 pole ceramic filter, Filtering DSP filtering with mild algorithm, Modulate FM/PPM, Shift polarity Positive or Negative (auto‐detect), Case Shrink wrap, Operating Voltage 4.8V~6.0VDC, Operating Current 11mA., , ,
Features: RD620II receiver – a small and light receiver with ...HiModel
WFLY 35MHZ 6 CHANNELS FM MINI RECEIVER
Size | 35mm x 21.5mm x 15mm |
Weight | 10g / 0.4oz ( with antenna ) |
Band | 35Mhz |
, , , , , , Specifications:, , , , , , , , , , , WFLY 35MHz 6 Channels FM Mini Receiver, Crystal type:, UM-5, ( mini size, not included ), Compatible with Futaba compatible FM single conversion transmitters., , ,
Includes/Requires: Requires:1 x UM-5 Rx crysatalHiModel
40MHZ FUTABA 6 CHANNELS FM RECEIVER W/O XTAL R156F
Receiver | R156F 6 channel FM mini receiver |
Receiving frequency | 40Mhz band |
Narrow Band | 20kHz |
Power requirement | 4.8 to 6.0V ( shared with servo) |
Current drain | 10mA |
Size | 33.3 x 13 x 21.4 mm /1.3 x 0.51 x 0.84 in. |
Weight | 0.36 oz. (10.2 g) |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Ideal choice for Park or Slow Flyers. Includes/Requires: Includes: ...HiModel
CORONA 58G/ 7KG/ .14 SEC DIGITAL SERVO DS-538MG
Type | DS538MG |
Size | 20x40x38.5mm(0.78"x1.57"x1.51") |
Weight | 58g |
Operating voltage | 4.8V~6.0V |
Operating current | 250mA |
Operating speed | 0.14sec/60º |
Stall torque | 7.0kg.cm |
Dead band | ≤2uSec |
Operating speed | 40º one side pulse traveling 400μs |
Ball bearing | MR106 |
Gear Material | Metal |
Connector wire length | 215mm |
Temperature | -20 ℃ to +60℃ |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x digital servo with servo horns1 Reviews
HiModel
EMAX 8.6G/ 2.0KG/ .09 SEC MICRO DIGITAL SERVO ES08D
Type | ES08D |
Weight | 8.6 grams |
Torque | 2.0 (kg.cm, VCC=4.8V)/ 27.8 oz.in |
Speed | 0.09 (sec/60°) |
Voltage | DC 4.8V |
Dimension | 32×11.5×24 mm / 1.25 x 0.45 x 0.94in |
Operation temperature | -20℃ to 75℃ |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x digital servo with servo horns4 Reviews