HiModel
2-PIN MALE BATTERY CONNECTOR FOR JR STYLE TRANSMITTER (10PCS)
| Typical application | connector used on JR transmitter for TX battery. |
, , , , , , Specifications:, , , , , , , , , , , 2-pin Male Battery Connector for JR Style Transmitter (10pcs), * Gender of connectors is determined by the metal terminal, not the housing., , ,
Includes/Requires: Include: 10 x male connectorsHiModel
SIMULATOR ADAPTOR CABLE FOR JR TRANSMITTER
, , , , , , Specifications:, , , , , , , , , , , Simulator adapting cable for JR transmitters., *This is the conversion cable only, the simulator dongle etc. to be purchased separately., , ,
Includes/Requires: Includes:1 x cableHiModel
ACE NI-MH 1600MAH/6.0V HP 2/3A BATTERY PACK W/JR CONNECTOR COMPETITION CLASS (TRAPEZIA)
| Type | Ni-Mh 2/3A |
| Capacity | 1600mah |
| Voltage | 6.0V |
| Weight | 115.6g / 4.07 oz |
, , , , , , Specifications:, , , , , , , , , , , Competition class, , ,
Features: ACE Ni-Mh 1600mAh/6.0V HP 2/3A Battery Pack W/JR Connector ...HiModel
H TYPE SUPPORT FOR JR TRANSMITTERS (PLASTIC)
Features:,
H Type Support for JR Transmitters1 Reviews
HiModel
ALUMINUM H-SHAPE SUPPORT FOR FUTABA/JR TRANSMITTERS
Features:,
Aluminum anodized H-Shape Support for Futaba/JR Transmitters Suit for Futaba ...HiModel
NECK STRAP FOR JR TRANSMITTER
| Includes | 1 x neck strap |
Features:, , Includes/Requires:, ,
Neck strap for JR transmitter. * color may slightly different ...HiModel
40MHZ JR SPCM 10CH AUTO SCAN PLL-SYNTHESIZED DUAL CONVERSION RECEIVER RS10DS
| Type | RS10DS Auto scan |
| Band | 40Mhz |
| ●Type FM | 10-channel/double conversion new ABC & W circuitry |
| ●Channel availability | 77 (40.770), 79 (40.790), 81 (40.810), 83 (40.830), 85 (40.850). |
| ●Sensitivity | 5uV/m |
| ●Selectivity | 8Khz/50dB |
| ●Channel Selection | Auto search system |
| ●Weight | 32g |
| ●Size | 16x38x53mm |
, , , , , , Specifications:, , , , , , , , , , , ●Dual conversion, ●Available for PCM transmitter (SPCM mode), , ,
Features: This is genuine JR SPCM 10CH Auto Scan PLL-Synthesized ...HiModel
FRSKY 2.4G JR COMPATIBLE RF MODULE (TWO-WAY) & RECEIVER COMBO DJT/V8FR-HV
| Operating Voltage Range | 4.8V-6V |
| Operating Current | 30mA |
| Specified Range | 1.2km |
| Resolution | 10bit |
| Latency | 22ms |
| Number of Channels | 8CH |
| Dimensions | 60×37×21 mm |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 50mA |
| Output Power | 60mW |
| Resolution | 10bit |
| Dimensions | 63.9X48.5X36.5mm (V8JT); |
, , , , , , Specifications:, , , , , , , , , , , Receiver specifications:, Transmitter module specifications:, , ,
Features: * The RF module of this combo was upgraded ...3 Reviews
HiModel
2.4G X8J JR COMPATIBLE RF MODULE
| Size | 60 X 44 X 22mm (2.36 X 1.73 X 0.87 inch) |
| Antenna | 2dBi |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Compatible with JR radios include: 347,388,783,U8,PCM10,PCM10S,PCM10SX,PCM10IIs,8103,9303,MX-22,MX-24s CE, FC & ...1 Reviews
HiModel
2.4G CORONA DSSS 8-CHANNEL RF MODULE & RX SYSTEM FOR JR TRANSMITTER (RF CT8J, RX CR8D) V2
| Type | CT8J 2.4G DSSS |
| Operating Voltage Range | 6.0V-13.0V |
| Operating Current | 100Ma |
| Resolution | 10bit |
, , , , , , Specifications:, , , , , , , , , , , Specification For Transmitter Module, Specification for Receiver, CR8D---- Fast Spread 2.4G Receiver work with Corona RF.Module, Operating Voltage Range --- 4.8V-6V, Operating Current --- 30Ma, Specified Range --- 1.5km, Resolution ---10 bit, Latency ---- 22ms, Sensitivity -- -100dbm, Channel --- 8CH, , ,
Features: When you plan to update your JR FM Transmitter ...2 Reviews
HiModel
2.4G 4-CHANNEL MICROLITE DSM2 /DSMX RECEIVER 410JST (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 4-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, ◆ 1.25Pitch JST servo connectors, Binding Procedure, 1. Put the binding harness into the Channel marked BIND. Next apply power to the receiver. Receiver’s LED should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 4 channels ◆ Preset failsafe system ...HiModel
2.4G 9-CHANNLE DSM2 MICROLITE RECEIVER (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 9-Channel Full-Range DSM2 Receiver |
| ◆ Modulation | DSM2 |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (W x Lx H) | 30 x 50 x 13mm |
| ◆ Weight | 19g |
| ◆ Voltage Range | 4-10v |
| ◆ Brown-Out Voltage | 4.0v (Always supply power above this voltage) |
| ◆ Antenna Length Main RX | 30mm (2) |
, , , , , , Specifications:, , , , , , , , , , , Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver. Both receiver and Satellite LED's should illuminate., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., General Notes:, Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed., , ,
Features: JR/SPEKTRUM Compatible Key Features ◆ 9 channels ◆ Patent ...2 Reviews
HiModel
2.4G 6-CHANNEL PARK FLYER RECEIVER AR6100E (JR/SPEKTRUM COMPATIBLE)
| * Type | Park flyer, Foamies, Up to 400 class helis |
| * Modulation | DSM2 |
| * Band | 2.4 GHz |
| * Dimensions (WxLxH) | 20mm x 36mm x 11.6mm |
| * Weight | 4.9 grams |
| * Voltage Range | 3.5v - 9.6v |
| * Antenna Length | 2 @ 30mm each |
, , , , , , Specifications:, , , , , , , , , , , * # of Channels: 6, How to bind?, 1.with the power off, plug the bind plug into the BATT port., 2.power on the receiver. if powered by a separate battery,plug the battery into any unused port., 3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural)., 4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind., 5.remove the bind plug to prevent the system form rebinding the next time the power is turned on., , ,
Features: The AR6100e weighs less than 4.9 grams. The AR6100e ...2 Reviews
HiModel
2.4G 6-CHANNEL MICROLITE DSM2 /DSMX RECEIVER SBUS610E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 6-Channel and 1 SBUS output Full-Range DSM2 Receiver and 1 SBUS output |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 50x30x13mm |
| ◆ Voltage Range | 3.6-9.6v |
| ◆ Antenna Length Main RX | 30mm*2 |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 8g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 6channels ◆ 1channels SBUS output ◆ ...3 Reviews
HiModel
2.4G 3-CHANNEL MICROLITE DSM2 /DSMX RECEIVER S3100E (JR/SPEKTRUM COMPATIBLE)
| ◆ Type | 3-Channel Full-Range DSM2 Receiver （1 S.BUS output） |
| ◆ Modulation | DSM2 /DSMX |
| ◆ Band | 2.4GHz |
| ◆ Dimensions (L xWx H) | 29x16x7mm |
| ◆ Voltage Range | 3.6-10v |
| ◆ Antenna Length Main RX | 29mm |
| General Notes | This is not a Spektrum receiver, nor is it a copy of a Spektrum Receiver. |
, , , , , , Specifications:, , , , , , , , , , , Receiver Specifications:, ◆ Weight: 3g, Binding Procedure, 1. Put the binding harness into connector location marked BIND. Next apply power to the receiver., 2. To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested). Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter., 3. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of both satellite and main receiver will illuminate solid. All fail-safes should be programed correctly now., 4. Remove binding harness from the BIND channel. Restart the receiver by cycling it power off and turn on. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions., The Spektrum brand is a trademark of Horizon Hobbies USA., , ,
Features: Key Features ◆ 3channels ◆ 1channels S.BUS output（1S.BUS output） ...3 Reviews